thomann CDR1 User manual

CDR1
DMX recorder
user manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
29.08.2017, ID: 416410

Table of contents
1 General notes............................................................................................................................................... 4
1.1 Further information........................................................................................................................... 5
1.2 Notational conventions.................................................................................................................... 6
1.3 Symbols and signal words............................................................................................................... 6
2 Safety instructions..................................................................................................................................... 8
3 Features....................................................................................................................................................... 11
4 Installation and starting up................................................................................................................ 12
5 Connections and controls................................................................................................................... 15
6 Operating.................................................................................................................................................... 20
6.1 Operating controls on the device.............................................................................................. 20
6.2 Remote control operation............................................................................................................ 26
7 Technical specifications....................................................................................................................... 27
8 Plug and connection assignments.................................................................................................. 28
9 Protecting the environment.............................................................................................................. 29
Table of contents
CDR1
3

1 General notes
This manual contains important instructions for the safe operation of the unit. Read and follow
the safety instructions and all other instructions. Keep the manual for future reference. Make
sure that it is available to all those using the device. If you sell the unit please make sure that
the buyer also receives this manual.
Our products are subject to a process of continuous development. Thus, they are subject to
change.
General notes
DMX recorder
4

1.1 Further information
On our website (www.thomann.de) you will find lots of further information and details on the
following points:
Download This manual is also available as PDF file for you to download.
Keyword search Use the search function in the electronic version to find the topics of
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the customer service will
gladly assist you.
General notes
CDR1
5

1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
Texts and values displayed on the device are marked by quotation marks and italics.
Examples: ‘24ch’, ‘OFF’.
1.3 Symbols and signal words
In this section you will find an overview of the meaning of symbols and signal words that are
used in this manual.
Letterings
Displays
General notes
DMX recorder
6

Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – danger zone.
General notes
CDR1
7

2 Safety instructions
This unit is used to record and playback DMX signals. Use the device only as described in this
user manual. Any other use or use under other operating conditions is considered to be
improper and may result in personal injury or property damage. No liability will be assumed for
damages resulting from improper use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
Intended use
Safety
Safety instructions
DMX recorder
8

NOTICE!
External power supply
The device is powered by an external power supply. Before connecting the
external power supply, ensure that the input voltage (AC outlet) matches the
voltage rating of the device and that the AC outlet is protected by a residual cur‐
rent circuit breaker. Failure to do so could result in damage to the device and pos‐
sibly the user.
Unplug the external power supply before electrical storms occur and when the
device is unused for long periods of time to reduce the risk of electric shock or
fire.
NOTICE!
Risk of fire
Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked flames.
Safety instructions
CDR1
9

NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
Safety instructions
DMX recorder
10

3 Features
nDMX input for recording DMX sequences in real-time
nDMX output
nData storage for 12 chases, each with up to 100 steps
nPlayback of DMX sequences on the DMX output either manually or timer controlled
nPlayback in endless loop possible
nSpeed and fading between recorded scenes adjustable
nSound-controlled operation via built-in microphone possible
nSuitable for truss or wall mounting
nOperation via buttons and display on the unit or the supplied infrared remote control
Features
CDR1
11

4 Installation and starting up
Unpack and carefully check that there is no transportation damage before using the unit. Keep
the equipment packaging. To fully protect the device against vibration, dust and moisture
during transportation or storage use the original packaging or your own packaging material
suitable for transport or storage, respectively.
Create all connections while the device is off. Use the shortest possible high-quality cables for
all connections. Take care when running the cables to prevent tripping hazards.
Installation and starting up
DMX recorder
12

Connect the DMX input of the DMX recorder (R) to the DMX output of a DMX controller (C).
Connect the output of the DMX recorder (R) to the first DMX device (1), such as a spotlight.
Connect the output of the first DMX device (1) to the input of the second one and so on, to
form a series connection. Make sure that the output of the last DMX device (n) in the chain is
terminated by a resistor (110 Ω, ¼W).
DMX connections
Installation and starting up
CDR1
13

While both the device and the DMX controller are in operation, the [DMX] LED is flashing and
thereby indicates that a DMX signal is being received on the input.
Press the lock of the battery holder to the centre of the housing and pull out the battery holder
like a drawer. Insert the battery. The battery is correct if the positive pole points to the housing
base of the remote control. Slide the battery holder back into the remote until it clicks into
place.
When shipping, the battery is already installed in the remote and protected against discharge
by a transparent plastic foil. Remove the plastic foil prior to first use.
DMX indicator
Inserting the battery into the
remote control
Installation and starting up
DMX recorder
14

5 Connections and controls
Connections and controls
CDR1
15

1 Control LEDs:
[Power]: Indicates that the unit is connected to the power supply.
[REC]: Flashes during recording.
[Play]: Flashes during playback.
[DMX]: Flashes when a DMX signal is received.
2, 3, 4.5 Function and control buttons
[MENU]: opens the main menu.
: decreases the displayed value by one.
: increases the displayed value by one.
[ENTER]: selects an option of the respective operating mode, confirms the set value.
6[IR]
Infrared sensor for the signals from the included remote control.
7 Variable fastening element for wall or ceiling mounting.
Connections and controls
DMX recorder
16

8 Omega bracket for truss mounting.
9 Microphone for sound control.
10 [DC IN]
Micro USB port for connecting the plug-in power supply.
11 [DMX OUT]
Output for the DMX signal to other DMX-controlled devices.
12 [DMX IN]
Input for the DMX signal, for example from a DMX controller.
Connections and controls
CDR1
17

21 [STANDBY]
Switches the unit to standby mode or back on again.
22 ,
Increases or decreases the currently displayed value.
23 [1/7] … [6/12]
Selecting a chase sequence within the selected group.
24 [Fade +/–]
Setting the fading speed.
25 [Master +/–]
Increases or decreases the value transmitted on all DMX channels by one.
26 [Speed +/–]
Setting the programme speed.
Remote control
Connections and controls
DMX recorder
18

27 [1–6], [7–12]
Selects a group.
28 [REC]
Starts recording.
29
Starts / stops the playback of a chase sequence.
Connections and controls
CDR1
19

6 Operating
Connect the device to the power supply to start operation.
6.1 Operating controls on the device
Press [MENU] repeatedly until the display shows ‘reC’ . Confirm with [ENTER]. Use the arrow
buttons to select a chase sequence to be recorded in the ‘CS.01’ …‘CS.12’ . Start the recording
with [ENTER]. The [REC] LED flashes, the display shows the number of the currently recorded
step. In your DMX controller, configure the scene you want to record and press [ENTER]. Repeat
this process until the chase sequence is completely recorded.
Press [MENU] to stop recording.
Record
Operating
DMX recorder
20