thomann LaserDerby User manual

LaserDerby
LED effect
user manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
10.08.2017, ID: 415614

Table of contents
1 General notes............................................................................................................................................... 5
1.1 Further information........................................................................................................................... 6
1.2 Notational conventions.................................................................................................................... 7
1.3 Symbols and signal words............................................................................................................... 8
2 Safety instructions.................................................................................................................................. 11
3 Features....................................................................................................................................................... 18
4 Installation.................................................................................................................................................. 19
5 Connections and controls................................................................................................................... 26
6 Operating.................................................................................................................................................... 32
6.1 Switching the device on / off....................................................................................................... 32
6.2 Main menu.......................................................................................................................................... 33
6.3 Menu overview................................................................................................................................. 40
6.4 Functions in 2-channel DMX mode........................................................................................... 41
6.5 Functions in 8-channel DMX mode........................................................................................... 42
7 Technical specifications....................................................................................................................... 46
Table of contents
LaserDerby
3

8 Plug and connection assignments.................................................................................................. 48
9 Troubleshooting...................................................................................................................................... 49
10 Cleaning....................................................................................................................................................... 51
11 Protecting the environment.............................................................................................................. 53
Table of contents
LED effect
4

1 General notes
This manual contains important instructions for the safe operation of the unit. Read and follow
the safety instructions and all other instructions. Keep the manual for future reference. Make
sure that it is available to all those using the device. If you sell the unit please make sure that
the buyer also receives this manual.
Our products are subject to a process of continuous development. Thus, they are subject to
change.
General notes
LaserDerby
5

1.1 Further information
On our website (www.thomann.de) you will find lots of further information and details on the
following points:
Download This manual is also available as PDF file for you to download.
Keyword search Use the search function in the electronic version to find the topics of
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the customer service will
gladly assist you.
General notes
LED effect
6

1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
Texts and values displayed on the device are marked by quotation marks and italics.
Examples: ‘24ch’, ‘OFF’.
Letterings
Displays
General notes
LaserDerby
7

The individual steps of an instruction are numbered consecutively. The result of a step is
indented and highlighted by an arrow.
Example:
1. Switch on the device.
2. Press [Auto].
ðAutomatic operation is started.
3. Switch off the device.
1.3 Symbols and signal words
In this section you will find an overview of the meaning of symbols and signal words that are
used in this manual.
Instructions
General notes
LED effect
8

Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
WARNING! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in death or serious
injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
Warning – laser radiation.
General notes
LaserDerby
9

Warning signs Type of danger
Warning – suspended load.
Warning – danger zone.
General notes
LED effect
10

2 Safety instructions
This device is intended for use as an electronic lighting effect by means of LED technology and
for the projection of laser light effects. The device is designed for professional use and is not
suitable for use in households. Use the device only as described in this user manual. Any other
use or use under other operating conditions is considered to be improper and may result in
personal injury or property damage. No liability will be assumed for damages resulting from
improper use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Intended use
Safety instructions
LaserDerby
11

It is based on DIN EN 60825-1: 2015. The corresponding accident prevention regulation of the
professional association in Germany is BGV-B2.
This device uses a class-3R laser. It is equipped with a safety key and a connection for an
external safety switch. Always remove the safety key when the device is not attended by a
trained operator.
As an operator you are responsible for the safety of all persons present. Familiarize yourself
with the laser safety regulations that apply in your country. To ensure safe operation, it is
important to pay attention to the following instructions.
Prior to commissioning, the company/operator must appoint a qualified person as laser pro‐
tection officer in writing and notify the operation of the laser equipment to the Accident Pre‐
vention and Insurance Association and to the authority responsible for occupational safety. In
the event of public use, the complete laser equipment must be approved by an expert before
use.
Laser safety basics
Safety instructions
LED effect
12

DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
Do not use the device if covers, protectors or optical components are missing or
damaged.
Safety
Safety instructions
LaserDerby
13

DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a pro‐
tective contact plug. Do not modify the mains cable or the plug. Failure to do so
could result in electric shock/death or fire. If in doubt, seek advice from a regis‐
tered electrician.
DANGER!
Laser radiation – avoid exposure to beam
The device uses a class-3R laser, classified according to EN 60825-1:2015. Do not
look into the laser beam. The laser beam can injure your eyes when you directly
look into it. Do not expose to the laser beam. The laser beam can cause skin
burns.
In this context take extreme care when using converging optical instruments.
Safety instructions
LED effect
14

WARNING!
Eye damage caused by high light intensity
Never look directly into the light source.
WARNING!
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons
should avoid looking at strobe lights.
NOTICE!
Risk of fire
Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked flames.
Safety instructions
LaserDerby
15

NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or fire.
Safety instructions
LED effect
16

NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react
with the coating of your parquet, linoleum, laminate or PVC floor and after some
time cause permanent dark stains.
In case of doubt, do not put the rubber feet directly on the floor, but use felt-pad
floor protectors or a carpet.
Safety instructions
LaserDerby
17

3 Features
The device features a unique combination of laser and LED effects.
nLaser configuration:
– Red (650 nm), 100 mW
– Green (532 nm), 50 mW
nLED configuration:
– Derby effect: 4 LEDs (1 × red, 1 × green, 1 × blue, 1 × white, each 3 W
nControl via DMX (2 or 8 channels, depending on operation mode), buttons and display on
the unit as well as the supplied remote control
nPreprogrammed automatic shows
nSound control
nStand-alone mode
nStrobe effect
Features
LED effect
18

4 Installation
Unpack and carefully check that there is no transportation damage before using the unit. Keep
the equipment packaging. To fully protect the device against vibration, dust and moisture
during transportation or storage use the original packaging or your own packaging material
suitable for transport or storage, respectively.
You can install the device standing or hanging. When in use, the device must be mounted at a
solid surface or clamped to an approved truss.
Work from a stable platform whenever you install or move the device or when you perform
any kind of maintenance. Block access under the work area.
Installation
LaserDerby
19

Connect the external safety switch (not supplied) to the provided connection socket on the
device. If you press the external switch, the laser beam will be switched off immediately.
Observe the safety instructions of the switch manufacturer and the regulations for the
intended use.
Safety switch (emergency stop)
Installation
LED effect
20