thomann xBrick Full-Colour 16x3W User manual

xBrick Full-Colour
16×3W
LED floodlight
user manual

Musikhaus Thomann e.K.
Treppendorf 30
96138 Burgebrach
Germany
Telephone: [phone]
email: [email protected]
Internet: www.thomann.de
15.11.2011

Table of contents
1 General notes............................................................................................................................................... 5
2 Safety instructions..................................................................................................................................... 8
3 Installation.................................................................................................................................................. 12
4 Starting up.................................................................................................................................................. 15
5 Operating elements and functions................................................................................................. 18
6 Operating.................................................................................................................................................... 20
6.1 Starting the device........................................................................................................................... 20
6.2 Main menu.......................................................................................................................................... 20
6.3 Menu overview................................................................................................................................. 26
6.4 Functions in 5-channel DMX mode........................................................................................... 27
6.5 Functions in 13-channel DMX mode........................................................................................ 28
7 Troubleshooting...................................................................................................................................... 30
8 Cleaning....................................................................................................................................................... 32
9 Technical specifications....................................................................................................................... 33
Table of contents
xBrick Full-Colour 16×3W
3

10 Protecting the environment.............................................................................................................. 34
Table of contents
LED floodlight
4

1 General notes
This user manual contains important information on the safe operation of the device. Read and
follow all safety notes and all instructions. Save this manual for future reference. Make sure
that it is available to all persons using this device. If you sell the device to another user, be sure
that they also receive this manual.
Our products are subject to a process of continuous development. We therefore reserve the
right to make changes without notice.
This section gives an overview of the symbols and signal words used in this user manual.Symbols and signal words
General notes
xBrick Full-Colour 16×3W
5

Signal word Meaning
DANGER! This combination of symbol and signal word
indicates an immediate dangerous situation
that will result in death or serious injury if it is
not avoided.
WARNING! This combination of symbol and signal word
indicates a possible dangerous situation that
can result in death or serious injury if it is not
avoided.
NOTICE! This combination of symbol and signal word
indicates a possible dangerous situation that
can result in material and environmental
damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
General notes
LED floodlight
6

Warning signs Type of danger
Warning – suspended load.
Warning – danger zone.
General notes
xBrick Full-Colour 16×3W
7

2 Safety instructions
Use the device only as described in this user manual. Any other use or use under other oper‐
ating conditions is considered to be improper and may result in personal injury or property
damage. No liability will be assumed for damages resulting from improper use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
Intended use
Safety
Safety instructions
LED floodlight
8

DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a pro‐
tective contact plug. Do not modify the mains cable or the plug. Failure to do so
could result in electric shock/death or fire. If in doubt, seek advice from a regis‐
tered electrician.
Safety instructions
xBrick Full-Colour 16×3W
9

WARNING!
Eye damage caused by high light intensity
Never look directly into the light source.
WARNING!
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons
should avoid looking at strobe lights.
NOTICE!
Risk of fire
Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked flames.
Safety instructions
LED floodlight
10

NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or fire.
Safety instructions
xBrick Full-Colour 16×3W
11

3 Installation
Unpack and check carefully there is no transportation damage before using the unit.
You can install the device on the wall, ceiling or floor. A mounting bracket and the necessary
screws are included in the package.
WARNING!
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules that apply
in your country. Always secure the device with a secondary safety attachment,
such as a safety cable or a safety chain.
Installation
LED floodlight
12

NOTICE!
Risk of overheating
The distance between the light output and the illuminated surface must be more
than 0.5 m (19.7 in).
Ensure also that there is enough room for ventilation.
The ambient temperature must always be below 40 °C (104 °F).
NOTICE!
Use of stands
When mounting the device onto a stand, ensure that the stand is in a safe and
stable position and that the weight of the device does not exceed the maximum
permissible load capacity of the stand.
Installation
xBrick Full-Colour 16×3W
13

NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not use ordi‐
nary microphone cables.
Never connect the DMX output to audio devices such as mixers or amplifiers.
The unit offers a 3-pin XLR socket for DMX output and a 3-pin XLR plug for DMX input. Please
refer to the drawing and table below for pin assignment.
1 Ground, shielding
2 DMX data (–)
3 DMX data (+)
DMX connections
Installation
LED floodlight
14

4 Starting up
Establish all connections as long as the unit is switched off. Use the shortest possible high-
quality cables for all connections.
Starting up
xBrick Full-Colour 16×3W
15

Connect the DMX input of the device to the DMX output of a DMX controller or another DMX
device. Connect the output of the first DMX device to the input of the second one, and so on
to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain
is terminated with a resistor (110 Ω, ¼W).
Connections in DMX mode
Starting up
LED floodlight
16

When you configure a group of devices in master/slave mode, the first unit will control the
other units for an automatic, sound-activated, synchronized show. This function is ideal when
you want to start a show immediately. Connect the DMX output of the master device to the
DMX input of the first slave device. Then connect the DMX output of the first slave device to
the DMX input of the second slave device and so on.
Connections in master/slave
mode
Starting up
xBrick Full-Colour 16×3W
17

5 Operating elements and functions
Rear panel
Operating elements and functions
LED floodlight
18

1 Display
2 Menu: to select the main menu
3 Down: to decrease the displayed value by one
4 Up: to increase the displayed value by one
5 Enter: to choose an option of the respective operating mode
6 Safety eye
7 MIC: built-in microphone for sound controlled operation
8 DMX In: DMX input
9 DMX Out: DMX output
10 Power In: mains socket with fuse holder. Please note the specification of allowed mains voltage underneath.
11 Mounting bracket
12 Locking screw for the mounting bracket
Operating elements and functions
xBrick Full-Colour 16×3W
19

6 Operating
6.1 Starting the device
Connect the device to the mains power supply, to start operation. After few seconds the dis‐
play shows, that the unit executes a reset. After that the unit is ready for operation. If it is con‐
figured to operate as Master", an automatic light show begins. According to your previous
selection, the display show ‘Master Sound’ , ‘Master Fade’ or ‘Master Color’.
6.2 Main menu
Briefly press the ‘MENU’ button, to select the main menu and the desired operating mode. Use
the buttons ‘Up’ and ‘Down’ , to change the respectively displayed value. When the display
shows the desired value, press the‘ENTER’ button.
If you don't press any button for about one minute, the unit will return to the previously
selected mode. The set values remain actual, even if the device is disconnected from the mains
power.
Operating
LED floodlight
20