thomann FunGeneration Speaker ToGo BT User manual

Speaker ToGo BT
mobile PA system
user manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
22.06.2016, ID: 378744 (V2)

Table of contents
1 General information................................................................................................................................. 4
1.1 Further information........................................................................................................................... 5
1.2 Notational conventions.................................................................................................................... 6
1.3 Symbols and signal words............................................................................................................... 6
2 Safety instructions..................................................................................................................................... 8
3 Features....................................................................................................................................................... 12
4 Installation and starting up................................................................................................................ 13
4.1 Battery operation............................................................................................................................. 14
4.2 Set-up................................................................................................................................................... 14
5 Connections and controls................................................................................................................... 15
6 Technical specifications....................................................................................................................... 22
7 Plug and connection assignment.................................................................................................... 24
8 Cleaning....................................................................................................................................................... 27
9 Protecting the environment.............................................................................................................. 28
Table of contents
Speaker ToGo BT
3

1 General information
This manual contains important instructions for the safe operation of the unit. Read and follow
the safety instructions and all other instructions. Keep the manual for future reference. Make
sure that it is available to all those using the device. If you sell the unit please make sure that
the buyer also receives this manual.
Our products are subject to a process of continuous development. Thus, they are subject to
change.
General information
mobile PA system
4

1.1 Further information
On our website (www.thomann.de) you will find lots of further information and details on the
following points:
Download This manual is also available as PDF file for you to download.
Keyword search Use the search function in the electronic version to find the topics of
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the customer service will
gladly assist you.
General information
Speaker ToGo BT
5

1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
1.3 Symbols and signal words
In this section you will find an overview of the meaning of symbols and signal words that are
used in this manual.
Letterings
General information
mobile PA system
6

Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
CAUTION! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in minor injury if it
is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
Warning – danger zone.
General information
Speaker ToGo BT
7

2 Safety instructions
This device is intended to be used in a sound reinforcement system. Use the device only as
described in this user manual. Any other use or use under other operating conditions is consid‐
ered to be improper and may result in personal injury or property damage. No liability will be
assumed for damages resulting from improper use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
Intended use
Safety instructions
mobile PA system
8

DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a pro‐
tective contact plug. Do not modify the mains cable or the plug. Failure to do so
could result in electric shock/death or fire. If in doubt, seek advice from a regis‐
tered electrician.
Safety instructions
Speaker ToGo BT
9

CAUTION!
Possible hearing damage
The device can produce volume levels that may cause temporary or permanent
hearing impairment. Over an extended period of time, even levels that seem to
be uncritical can cause hearing damage.
Decrease the volume level immediately if you experience ringing in your ears or
hearing impairment. If this is not possible, keep a greater distance or use suffi‐
cient ear protectors.
NOTICE!
Risk of fire
Do not cover the device nor any ventilation slots. Do not place the device near
any direct heat source. Keep the device away from naked flames.
Safety instructions
mobile PA system
10

NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or fire.
Safety instructions
Speaker ToGo BT
11

3 Features
The mobile PA system is characterized by the following features:
nCompact all-in-one system
nMaximum flexibility thanks to mains and battery operation
n10" woofer and tweeter
nOutput power 50 W (peak)
nFrequency response 70 Hz … 20 kHz ± 3 dB
n3-band EQ
nBluetooth® interface for audio playback from mobile devices
n1 × balanced XLR / 1/4" combo socket to connect microphones
n1 × unbalanced 1/4"phone input to connect microphones or instruments
n1 × 1/8" mini phone socket as line input
n1 × line output
nUSB port for charging suitable devices
nPlastic housing with tripod flange, telescope carrying handle and casters
Features
mobile PA system
12

4 Installation and starting up
Unpack and carefully check that there is no transportation damage before using the unit. Keep
the equipment packaging. To fully protect the device against vibration, dust and moisture
during transportation or storage use the original packaging or your own packaging material
suitable for transport or storage, respectively.
Establish all connections as long as the unit is switched off. Use the shortest possible high-
quality cables for all connections.
NOTICE!
Possible property damage by magnetic fields
Loudspeakers produce a static magnetic field. Therefore, maintain an appropriate
distance to devices that can be adversely affected or damaged by an external
magnetic field.
Installation and starting up
Speaker ToGo BT
13

4.1 Battery operation
You can also operate the device independently of mains power supply via the built-in
rechargeable battery.
4.2 Set-up
You can operate the device standing on the floor or on a suitable speaker stand using the
tripod flange at the bottom. For easy handling of the unit, a telescope handle is located on the
back panel and each side has a grip cap.
Installation and starting up
mobile PA system
14

5 Connections and controls
Front panel
Connections and controls
Speaker ToGo BT
15

1[CH 1]
Balanced XLR / 1/4" combo input for channel 1 to connect microphones that don't need phantom power.
2[LEVEL]
Volume control for channel 1. Turn the control to the right to increase the volume. in this channel. Turn it to the left
to reduce the volume.
3[CH 2]
Unbalanced 1/4" phone input for channel 2 to connect microphones or instruments.
4[LEVEL]
Volume control for channel 2. Turn the control to the right to increase the volume. in this channel. Turn it to the left
to reduce the volume.
5[CH 3]
1/8" mini phone socket as input for channel 3 to connect line level signals, e.g. from CD or MP3 players.
Connections and controls
mobile PA system
16

6[LEVEL]
Volume control for channel 3. Turn the control to the right to increase the volume. in this channel. Turn it to the left
to reduce the volume.
7[PAIRED / DISCONNECTED]
Push button to enable / disable the Bluetooth® function with indicator. A few seconds after switching the function
on, the indicator in the push button lights up red and an acoustic signal sounds. The device is not operational. Move
the mobile Bluetooth® device close to the Speaker ToGo (max. 3 m) and let the mobile device scan for other devices
offering a Bluetooth® connection. The Speaker ToGo logs in as „BLUETOOTH“. Proceed with the pairing. If you are
asked to enter a pairing code, enter ‘0000’ . When the connection is established, the indicator in the push button
lights up blue and you can play back audio files from the mobile device through the Speaker ToGo. To disconnect,
press the button again. Again, you hear an acoustic signal and after a few seconds the indicator in the button goes
out.
To deposit the mobile device, the top panel recess is particularly well suited.
8[TREBLE]
Treble control. Turn the control to the right to increase the treble. Turn it to the left to reduce the treble. When it's in
the lock-in position ‘0’ the signal remains unaffected.
Connections and controls
Speaker ToGo BT
17

9[MIDDLE]
Mids control. Turn the control to the right to increase the mids. Turn it to the left to reduce the mids. When it's in the
lock-in position ‘0’ the signal remains unaffected.
10 [BASS]
Bass control. Turn the control to the right to increase the bass. Turn it to the left to reduce the bass. When it's in the
lock-in position ‘0’ the signal remains unaffected.
11 [MASTER VOL]
Overall volume control. Turn the control to the right to increase the overall volume. Turn it to the left to reduce the
overall volume.
12 [POWER]
Power indicator, lights when the power is on.
Connections and controls
mobile PA system
18

Rear panel
Connections and controls
Speaker ToGo BT
19

13 [POWER INPUT]
Plug for mains cable with fuse holder. To operate the device via the power grid, connect this plug using the supplied
power cord to an AC outlet.
14 [CHARGE]
If the charge indicator light is on, the internal battery is being charged. After the LED goes out, the battery is fully
charged.
15 [POWER ON | OFF]
Bring this switch in the ON position to turn on the device. Bring this switch in the OFF position to turn off the device.
16 [DEVICE CHARGE]
With the unit turned on, you can operate or charge appropriate devices via this USB port. The maximum current draw
of the connected device must not exceed 2.1 A, otherwise the Speaker ToGo can be damaged. There is no data trans‐
mission. If the Speaker To Go is powered by the built-in battery, the connection of devices to this socket reduces the
operating time.
Connections and controls
mobile PA system
20