Thor’s Drone World DJI RC PRO PLUS User manual

by Thor’s Drone World
User’s Manual
Tripod bracket for
DJI RC PRO PLUS

A. Tripod bracket
B. Pre-Installed Quick Release bracket
C. 2x Hex Keys
D. 4 x Replacement screws (M2.5 x8)
E. Mounting screws for quick release (female) plate* if needed
Content:
A.
B.
C.
D.
E.

Your Tripod bracket for DJI RC PRO PLUS comes with a pre-installed
quick release bracket for it to be installed on any Tripod device /
StrapThor® - body tripod or similar devices. Press the red button to
release the female plate and mount it to your tripod. We have
provided 2 x mounting screws (1/4”-20 x 3/8”) in case needed.
Pre-Installed Quick Release bracket

How to mount:
Remove the screws from the small brackets located at the rear of
the base mount with the smallest hex key provided.

Align the controller support stand with the LifThor
RC PRO PLUS mount, as shown. The back plate has
indentations to provide a secure grip to the stand.

Screw the small brackets back in place. We
recommend placing all four screws before
tightening them for an even grip

Now, your Tripod bracket for DJI RC PRO PLUS is properly
installed. To access the DJI RC PRO PLUS battery bay there is
no need to unmount it. The LifThor mount is cleverly
designed for you to fold backwards the controller to access
the batteries as shown in the pictures.
*If needed you can
tighten / loosen the
hinge with the (bigger)
hex key and wrench
provided.

www.lifthor.com