Thorlux Lighting SmartScan Touch User manual

21LFT41813 Issue 1 PN 3853A Sept 22
35
86
15 30
4
NOTE: Pattress box
single gang depth
min. 35mm for
mains versions
only (not supplied)
14
81 71
35
86
15 30
4
NOTE: Pattress Box
single gang depth
min. 35mm for wall
mounted versions only
(Not supplied)
14
81 71
OFF
Programmable
scenes
On/ECO
Brightness:
100%
75%
50%
25%
10%
IK10
IP56
III
IP40
IP54 D
IP67
IP68
IP65
IP66
IP60
IP64
IP54
IP55
IP50
IP53
IP43
IP44
IP42
IP30
IP40
IP23
IP20
IP22
SmartScan Touch
BATTERY POWERED SS20212 & MAINS POWERED SS20213
DIMENSIONS
FUNCTIONS
■The SmartScan Touch allows the user to control a group of SmartScan luminaires.
■Simply touch the desired function.
■The mains powered SmartScan Touch has a wireless connection that
allows control of the luminaires using the Thorlux SmartScan App.
■Wireless communications are disabled as default, therefore the
SmartScan Touch must be commissioned before use.
To enter Set Up Mode press any button for 10
seconds. A green LED will illuminate to conrm
Set Up Mode.
The SmartScan Touch can now be programmed
using the SmartScan Programmer (please see
page 4 for programming commands).
Set Up Mode will exit after 60 seconds of inactivity.
OPERATING INSTRUCTIONS
Max. 40m
*
* 922MHz Max. 10m
NOTE: Distance is reduced if walls are between
SmartScan Touch and luminaires.
Max. 0.5m
POSITIONING SMARTSCAN PROGRAMMING/TESTING
SMARTSCAN TOUCH
Search for Thorlux SmartScan

21LFT41813 Issue 1 PN 3853A Sept 22
12
BATTERY POWERED
MAINS POWERED
1
2
2x CR2032
(included)
13
NL
N
-
-
+
+
L
2
Max. 2 x 1.5mm2
1. REMOVING THE TOUCH PANEL
2. BATTERY PLACEMENT AND MAINS WIRING

21LFT41813 Issue 1 PN 3853A Sept 22
BATTERY POWERED
MAINS POWERED
1
Adhesive pads
(provided)
1
Pattress box
(not provided)
External power supply (only
used with SS20213) to be
mounted within pattress box
Mains in
N
-
-
+
+
L
4
3
2
1
PLEASE ENSURE CORRECT
FIXING TYPE
2X
PLEASE ENSURE CORRECT
FIXING TYPE
2X
PLEASE ENSURE CORRECT
FIXING TYPE
2X
45
45
UP
DOWN
ADHESIVE PADS WOOD FIXING
PATTRESS BOX
PATTRESS BOX
Recommended use:
Recommended use:
UP
DOWN
60
UP
DOWN
60
1
1
1
5
4
2x CR2032
3
2
2x
4
3

21LFT41813 Issue 1 PN 3853A Sept 22
NOTICE TO CONTRACTOR - PLEASE PASS THIS LEAFLET TO THE END-USER
MERSE ROAD NORTH MOONS MOAT
REDDITCH WORCS. B98 9HH ENGLAND
e-mail: [email protected]
Web: www.thorlux.com
☎
[phone]
Australia: www.thorlux.com.au ☎ [phone]
Deutschland: www.thorlux.de ☎ [phone]
Ireland: www.thorlux.ie ☎ [phone]
UAE: www.thorlux.ae ☎ [phone]
FM 10913 EMS 532104 OHS 704131
CERTIFIED CERTIFIED CERTIFIED
PROGRAMMING BUILDING ADDRESS AND GROUP ADDRESS
FUNCTION BUTTON DISPLAY
1Switch on the Smart Programmer
2Scroll to the <SmartScan
<SmartScan Emergency> menu Emergency>
3Select the menu download all
<SmartScan Emergency> <SmartScan Emergency>
4Scroll to the building: 123
building setting address 1-254
To change the address press
the (Select) button. (A star in the building: 123*
5upper corner indicates access of address 1-254
the program mode).
6Use the scroll buttons, to select building: 123*
the required address address 1-254
8Scroll to group group addr: 123
address address 1-254
12 Scroll to RF transmit rf transmit: en
enable/disable
Select this parameter. Option
9 name and current status are group addr: 123*
now displayed on the top line. address 1-254
To change between
13 enable and disable press rf transmit: en*
the (Select) button enable/disable
Now all parameters are memorised in the SmartScan Touch
10 Use the scroll buttons, to select group addr: 123*
the required address address 1-254
14 Use the scroll buttons, to select rf transmit: en*
the required function enable/disable
To exit the setting mode press
(Esc). The new selected value group addr: 123
12 will now be displayed on the address 1-254
rst line.
*RF Transmit - can be enabled or disabled from the SmartScan
Emergency menu. When disabled all radio transmissions are prohibited.
NOTE: The SmartScan Touch does not support any other
functions from the programmer menu.
The (Send) button will now,
11 update the chosen parameter
in the SmartScan Touch
The (Send) button will now,
15 update the chosen parameter
in the SmartScan Touch
The (Send) button will now,
7update the chosen parameter
in the SmartScan Touch
PROGRAMMING
SmartScan Touch is programmed with the SmartScan
Programmer. This device uses bi-directional infrared to program
the SmartScan Touch. Ensure at all times, during use, only one
device can be “seen” by the programmer.
DISPLAY
On the rst LCD line the actual menu point is displayed.
On the second line, the status line, the possible settings
for this menu point are shown. During a data transmission,
the actual transmission status (as well as any error
messages) is shown.
■Power : 4x AA/1.5Vbattery (supplied)
PROGRAMMER
catalogue no. LCM 10777SS
Only one SmartScan device in view of the programmer
Thorlux products should not be modied. Any modication
may render the product unsafe and will invalidate any Safety/
Approval marks.
MODIFICATIONS
MAINTENANCE
The SmartScan Touch should not be subjected to undue
mechanical shock or extremes of temperature. Clean only
with a clean dry cloth.
✘
✔