Tibbo EM1000 User manual

Copyright Tibbo Technology
Tibbo Programmable Hardware Manual

Programmable Hardware Manual (PHM)I
© Tibbo Technology Inc.
Table of Contents
Introduction 1
Legal Information 1
Common vs. Proprietary
Knowledge 4
Embedded Modules 5
................................................................................................................................... 5EM2000 BASIC/C-programmable IoT Module
............................................................................................................................................................... 8Detailed Device Info ............................................................................................................................................................ 12General-purpose I/O Lines ............................................................................................................................................................ 13Wireless Add-on Port, Wi-Fi Communications
............................................................................................................................................................ 14Ethernet Port Lines ............................................................................................................................................................ 15Serial Ports .......................................................................................................................................................... 17Wiegand and Clock/Data Circuit Examples
............................................................................................................................................................ 18Analog-to-digital Converter (ADC)
............................................................................................................................................................ 18I2C/SPISupport (SSIChannels)
............................................................................................................................................................ 18Square Wave Generator ............................................................................................................................................................ 19Real-time Clock (RTC) ............................................................................................................................................................ 19Flash and EEPROMMemory ............................................................................................................................................................ 20LEDLines ............................................................................................................................................................ 20External LCDSupport ............................................................................................................................................................ 21External Keypad support ............................................................................................................................................................ 23Power, Reset, PLL Control, and Mode Selection
............................................................................................................................................................... 24Mechanical Dimensions ............................................................................................................................................................... 26Ordering Info and Specifications
................................................................................................................................... 28EM1000 BASIC/C-programmable Ethernet Module
............................................................................................................................................................... 30EM1000-00 and -01 ............................................................................................................................................................... 31Detailed Device Info ............................................................................................................................................................ 35General-purpose I/O Lines ............................................................................................................................................................ 36Wireless Add-on Port ............................................................................................................................................................ 37Ethernet Port Lines ............................................................................................................................................................ 40Serial Ports ............................................................................................................................................................ 40Square Wave Generator ............................................................................................................................................................ 40Flash and EEPROMMemory ............................................................................................................................................................ 41Real-time Counter ............................................................................................................................................................ 42LEDLines ............................................................................................................................................................ 42Power, Reset, PLL Control, and Mode Selection Lines
............................................................................................................................................................... 44Mechanical Dimensions ............................................................................................................................................................... 45Ordering Info and Specifications
................................................................................................................................... 47EM1206 BASIC/C-programmable Ethernet Module
............................................................................................................................................................... 50Detailed Device Info ............................................................................................................................................................ 52General-purpose I/O Lines ............................................................................................................................................................ 53Ethernet Port Lines ............................................................................................................................................................ 54Serial Ports ............................................................................................................................................................ 54Square Wave Generator ............................................................................................................................................................ 54Flash and EEPROMMemory ............................................................................................................................................................ 55Real-time Counter ............................................................................................................................................................ 56LEDLines ............................................................................................................................................................ 56Power, Reset, and Mode Selection Lines
............................................................................................................................................................... 58Onboard LEDs ............................................................................................................................................................... 58Thermal considerations

IIContents
© Tibbo Technology Inc.
............................................................................................................................................................... 59Mechanical Dimensions ............................................................................................................................................................... 60Ordering Info and Specifications
................................................................................................................................... 62EM510 "MiniMo" BASIC/C-programmable IoT Module
............................................................................................................................................................... 65Detailed Device Info ............................................................................................................................................................ 67Serial Port and General-purpose I/O Lines
............................................................................................................................................................ 68Ethernet Port Lines ............................................................................................................................................................ 69Flash and EEPROMMemory ............................................................................................................................................................ 70LEDLines ............................................................................................................................................................ 71Power, Reset, and Mode Selection Lines
............................................................................................................................................................... 72Mechanical Dimensions ............................................................................................................................................................... 72Ordering Info and Specifications
................................................................................................................................... 74EM500 "MiniMo" BASIC/C-programmable Ethernet Module
............................................................................................................................................................... 76Detailed Device Info ............................................................................................................................................................ 78Serial Port and General-purpose I/O Lines
............................................................................................................................................................ 78Ethernet Port Lines ............................................................................................................................................................ 79Flash and EEPROMMemory ............................................................................................................................................................ 80LEDLines ............................................................................................................................................................ 81Power, Reset, and Mode Selection Lines
............................................................................................................................................................... 83Mechanical Dimensions ............................................................................................................................................................... 83Ordering Info and Specifications
................................................................................................................................... 85EM1202 BASIC/C-programmable Ethernet Module
............................................................................................................................................................... 87Detailed Device Info ............................................................................................................................................................ 89General-purpose I/O Lines ............................................................................................................................................................ 90Ethernet Port Lines ............................................................................................................................................................ 91Serial Ports ............................................................................................................................................................ 91Square Wave Generator ............................................................................................................................................................ 91Flash and EEPROMMemory ............................................................................................................................................................ 92LEDLines ............................................................................................................................................................ 93Power, Reset, and Mode Selection Lines
............................................................................................................................................................... 95Mechanical Dimensions ............................................................................................................................................................... 95Ordering Info and Specifications
................................................................................................................................... 97EM200
............................................................................................................................................................... 99Detailed Device Info ............................................................................................................................................................ 100Ethernet Port Lines ............................................................................................................................................................ 102Serial Port and General-purpose I/O Lines
............................................................................................................................................................ 102Flash and EEPROMMemory............................................................................................................................................................ 102LEDLines ............................................................................................................................................................ 103Power, Reset, and Mode Selection Lines
............................................................................................................................................................... 104Mechanical Dimensions
............................................................................................................................................................... 105Ordering Info and Specifications
Boards 106
................................................................................................................................... 106EM2001 BASIC/C-programmable IoT Board
............................................................................................................................................................... 110Detailed Device Info ............................................................................................................................................................ 114General-purpose I/O Lines ............................................................................................................................................................ 115Wireless Add-on Port, Wi-Fi Communications
............................................................................................................................................................ 115Ethernet Port ............................................................................................................................................................ 115Serial Ports .......................................................................................................................................................... 117Wiegand and Clock/Data Circuit Examples
............................................................................................................................................................ 118Analog-to-digital Converter (ADC)
............................................................................................................................................................ 118I2C/SPISupport (SSIChannels)
............................................................................................................................................................ 118Square Wave Generator ............................................................................................................................................................ 119Flash and EEPROMMemory............................................................................................................................................................ 119Real-time Clock (RTC) and Backup Battery
............................................................................................................................................................ 119LEDs and LEDLines ............................................................................................................................................................ 120External LCDSupport

Programmable Hardware Manual (PHM)III
© Tibbo Technology Inc.
............................................................................................................................................................ 120External Keypad support ............................................................................................................................................................ 123Power, Reset, PLL Control, and Mode Selection
............................................................................................................................................................... 124Mechanical Dimensions
............................................................................................................................................................... 125Ordering Info and Specifications
................................................................................................................................... 127EM1001 BASIC/C-programmable IoT Board
............................................................................................................................................................... 129Detailed Device Info ............................................................................................................................................................ 133General-purpose I/O Lines ............................................................................................................................................................ 134Wireless Add-on Port ............................................................................................................................................................ 134Ethernet Port ............................................................................................................................................................ 135Serial Ports ............................................................................................................................................................ 135Square Wave Generator ............................................................................................................................................................ 135Flash and EEPROMMemory............................................................................................................................................................ 136Real-time Counter and Backup Supercap
............................................................................................................................................................ 136LEDs and LEDLines ............................................................................................................................................................ 137Power, Reset, PLL Control, MDButton, and Mode Lines
............................................................................................................................................................... 139Mechanical Dimensions
............................................................................................................................................................... 139Ordering Info and Specifications
................................................................................................................................... 141NB10x0 and IB100x Boards
............................................................................................................................................................... 143NB10x0 Network Boards ............................................................................................................................................................ 143NB1000 Board .......................................................................................................................................................... 144NB1000 Connectors and Controls
....................................................................................................................................................... 144Power Jack, Terminals and Power Regulator
....................................................................................................................................................... 145Ethernet Jack ....................................................................................................................................................... 145Jumpers, Buttons and LEDs
....................................................................................................................................................... 146External LEDControl ....................................................................................................................................................... 147Buzzer .......................................................................................................................................................... 147Ordering Info and Specifications
............................................................................................................................................................ 148NB1010 Board .......................................................................................................................................................... 149NB1010 Connectors and Controls
....................................................................................................................................................... 149Power Jack, Terminals and Power Regulator
....................................................................................................................................................... 150Ethernet Jack ....................................................................................................................................................... 150Jumpers, Buttons and LEDs
....................................................................................................................................................... 151External LEDControl ....................................................................................................................................................... 153Buzzer ....................................................................................................................................................... 153Optional Wi-Fi Interface ....................................................................................................................................................... 153Optinal GPRS Interface ............................................................................................................................................................ 154Ordering Info and Specifications
............................................................................................................................................................... 155IB100x Interface Boards ............................................................................................................................................................ 156IB1000, IB1002, and IB1003 (4 Serial Ports)
.......................................................................................................................................................... 156Connectors and Headers .......................................................................................................................................................... 158Serial Ports .......................................................................................................................................................... 160LEDControl .......................................................................................................................................................... 160Ordering Info and Specifications
............................................................................................................................................................ 161IB1004 and SB1004 (Analog I/O)
.......................................................................................................................................................... 162Terminal blocks .......................................................................................................................................................... 164Control Lines .......................................................................................................................................................... 166Detailed Information ....................................................................................................................................................... 167A/DConverter ....................................................................................................................................................... 172D/A Converter ....................................................................................................................................................... 174Relays ....................................................................................................................................................... 175RS232/485 Port ....................................................................................................................................................... 176LEDControl .......................................................................................................................................................... 177Ordering Info and Specifications
............................................................................................................................................................ 177IB1005 and SB1005 (Digital I/O)
.......................................................................................................................................................... 178Terminal Blocks .......................................................................................................................................................... 180Control Lines .......................................................................................................................................................... 182Detailed Information ....................................................................................................................................................... 183Opto-isolated Inputs

IVContents
© Tibbo Technology Inc.
....................................................................................................................................................... 185Relays ....................................................................................................................................................... 186RS232/485 Port ....................................................................................................................................................... 187LEDControl .......................................................................................................................................................... 187Ordering Info and Specifications
............................................................................................................................................................... 188LB100x LEDBoards ............................................................................................................................................................ 188LB1000 ............................................................................................................................................................ 189LB1001 ............................................................................................................................................................... 190Cable data ............................................................................................................................................................ 190IC1000 Interboard Cable ............................................................................................................................................................ 191LC1000 LEDBoard Cable............................................................................................................................................................... 192Mechanical data ............................................................................................................................................................ 192NB10x0 and IB100x Board Dimensions
............................................................................................................................................................ 194SB100x Board Dimensions ............................................................................................................................................................ 196LB100x Board Dimensions
................................................................................................................................... 198DS1206N
............................................................................................................................................................... 201DS1206N Hardware ............................................................................................................................................................ 201Power Arrangement ............................................................................................................................................................ 202Ethernet Port ............................................................................................................................................................ 203Multi-channel Serial Port ............................................................................................................................................................ 205Flash and EEPROMMemory
............................................................................................................................................................... 206Mechanical Dimensions
............................................................................................................................................................... 207Ordering Info and Specifications
................................................................................................................................... 209EM1202EV
............................................................................................................................................................... 211EM1202EV Hardware ............................................................................................................................................................ 212Power Arrangement ............................................................................................................................................................ 212Ethernet Port ............................................................................................................................................................ 213Multi-channel Serial Port .......................................................................................................................................................... 215Additional Information on Serial Port Lines
............................................................................................................................................................ 216Flash and EEPROMMemory
............................................................................................................................................................... 217Mechanical Dimensions
............................................................................................................................................................... 218Ordering Info and Specifications
................................................................................................................................... 220EM1206EV
............................................................................................................................................................... 221Wireless Add-on Connector
............................................................................................................................................................... 222Main and Backup Power
............................................................................................................................................................... 223Multi-channel RS232 Port and Expansion Connector
................................................................................................................................... 226EM120/EM200-EV
............................................................................................................................................................... 226Power Jack ............................................................................................................................................................... 227Ethernet Port Pin Assignment
............................................................................................................................................................... 227RS232 Port Pin Assignment
............................................................................................................................................................... 228Expansion Connector Pin Assignment
Development Systems 229
................................................................................................................................... 229EM2000EV
................................................................................................................................... 231EM1000EV
................................................................................................................................... 232EM1000TEV
............................................................................................................................................................... 233TEV-MB0 ............................................................................................................................................................... 233TEV-KB0 ............................................................................................................................................................... 235TEV-LBx Boards ............................................................................................................................................................ 237TEV-LB0 ............................................................................................................................................................ 239TEV-LB1 ............................................................................................................................................................ 240TEV-LB2 ............................................................................................................................................................... 242TEV-IBx Boards ............................................................................................................................................................ 243TEV-IB0 ............................................................................................................................................................ 244TEV-IB1 ............................................................................................................................................................... 246Ordering Info

Programmable Hardware Manual (PHM)V
© Tibbo Technology Inc.
................................................................................................................................... 247EM500EV/EM510EV
............................................................................................................................................................... 248EM500EV-MB0 ............................................................................................................................................................... 249EM500EV-IB0 ............................................................................................................................................................... 250EM500EV-IB1 ............................................................................................................................................................... 251EM500EV-IB2 ............................................................................................................................................................... 252Ordering Info
Tibbo Project System (TPS) 254
................................................................................................................................... 255TPS: the General View
................................................................................................................................... 256Tibbits
............................................................................................................................................................... 256Tibbit Form Factors & Colors
............................................................................................................................................................ 257M1 "Narrow" Tibbits ............................................................................................................................................................ 259M2 "Wide" Tibbits ............................................................................................................................................................ 261C1 "Narrow" Tibbits ............................................................................................................................................................ 262C2 "Wide" Tibbits ............................................................................................................................................................ 264H1 "Hybrid" Tibbits ............................................................................................................................................................ 265H2 "Hybrid" Tibbits ............................................................................................................................................................... 266Tibbit Power Lines ............................................................................................................................................................... 267Tibbit Sockets and Tiles
............................................................................................................................................................... 269Electrical Connections on a Tile
............................................................................................................................................................... 271Tibbits with "Special Needs"
............................................................................................................................................................ 271[SER] Tibbits That Require UART Functionality
............................................................................................................................................................ 272[INT] Tibbits That Require an Interrupt Line
............................................................................................................................................................ 273[POE] Tibbits That Require PoEPower Lines
............................................................................................................................................................ 273[CAN] Tibbits That Require CANfunctionality
............................................................................................................................................................ 274[AUD] Tibbits That Require Audio Functionality
............................................................................................................................................................ 274[MMC] Tibbits That Require MMC(SD) Functionality
............................................................................................................................................................ 274[USB] Tibbits That Require USB Functionality
............................................................................................................................................................... 274Combining "C" and "M" Tibbits
............................................................................................................................................................ 275C1 + M1 ............................................................................................................................................................ 276C2 + M2 ............................................................................................................................................................ 277C2 + Two M1s ............................................................................................................................................................ 278Two C1s + M2 ............................................................................................................................................................... 278Tibbit LEDs and Their Colors
............................................................................................................................................................... 280Labeling ............................................................................................................................................................... 280Available Tibbits ............................................................................................................................................................ 282#00-1, M1S: Four Direct I/O Lines
............................................................................................................................................................ 283#00-2, M1S: Three Direct I/O Lines and Ground
............................................................................................................................................................ 284#00-3, M1S: Two Direct I/O Lines, +5V Power, Ground
............................................................................................................................................................ 286#01, M1S: Four-line RS232 Port
............................................................................................................................................................ 287#02, M2S: RS232/422/485 Port
............................................................................................................................................................ 290#03-1, M1S: Two Low-power Relays (Configuration 1)
............................................................................................................................................................ 291#03-2, M1S: Two Low-power Relays (Configuration 2)
............................................................................................................................................................ 292#04-1, M1S: Two Isolated Inputs
............................................................................................................................................................ 293#04-2, M1S: Three Isolated Inputs, Common (-)
............................................................................................................................................................ 294#04-3, M1S: Three Isolated Inputs, Common (+)
............................................................................................................................................................ 295#04-4, M1S: Four Opto-inputs, Common Ground
............................................................................................................................................................ 296#04-5, M1S: Two 24V Isolated Inputs
............................................................................................................................................................ 297#04-6, M1S: Three 24V Isolated Inputs, Common (-)
............................................................................................................................................................ 298#04-7, M1S: Three 24V Isolated Inputs, Common (+)
............................................................................................................................................................ 299#04-8, M1S: Four 24V Isolated Inputs, Common Ground
............................................................................................................................................................ 300#05, M1S: RS485 Port ............................................................................................................................................................ 301#06, M2T: Two High-power Relays
............................................................................................................................................................ 303#07, M1S: Two Solid State Relays
............................................................................................................................................................ 304#08, M1S: Wiegand and Clock/Data Reader Port
............................................................................................................................................................ 305#09, M1S: Low-power 5V Supply, 12V Input
............................................................................................................................................................ 306#10, M1T: Medium-power 5V Supply, 12 V Input

VIContents
© Tibbo Technology Inc.
............................................................................................................................................................ 307#11, M1S: Four Open Collector Outputs
............................................................................................................................................................ 309#12, M1S: Low-power +15/-15V Power Supply, 5V Input
............................................................................................................................................................ 310#13, M1S: Four-channelADC
............................................................................................................................................................ 311#14, M1S: Four-channelDAC
............................................................................................................................................................ 312#15, H1: High-voltage ACSolid State Relay
............................................................................................................................................................ 314#16, M1S: Three PWMs With OCOutputs
............................................................................................................................................................ 315#17, M1S: Three PWMs With Power Outputs
............................................................................................................................................................ 317#18, C1: Power Input ............................................................................................................................................................ 318#19, C2: DB9MConnector ............................................................................................................................................................ 318#20, C2: Nine Terminal Blocks
............................................................................................................................................................ 319#21, C1: Four Terminal Blocks
............................................................................................................................................................ 320#22, M1S: RTDTemperature Meter
............................................................................................................................................................ 322#23, M2T: Isolated PoEPower Supply, 5V Output
............................................................................................................................................................ 324#25: M2S: High-power 5V Supply, 12/24/48V Input
............................................................................................................................................................ 326#26, M1S: IRCommand Processor
.......................................................................................................................................................... 328Theory of Operation .......................................................................................................................................................... 329Resetting and Initializing the Onboard FPGA
.......................................................................................................................................................... 330SPIRead and Write Transactions
.......................................................................................................................................................... 331Registers ....................................................................................................................................................... 332Command Register ....................................................................................................................................................... 332Status Register ....................................................................................................................................................... 332TX Length Registers ....................................................................................................................................................... 333RX Length Registers ....................................................................................................................................................... 333Carrier Divider Registers ....................................................................................................................................................... 333TX and RX Data Buffers .......................................................................................................................................................... 334Examples of Wiring to IRReceivers & Emitters
............................................................................................................................................................ 335#27, C1: IRReceiver/Transmitter
............................................................................................................................................................ 336#28, C1: Ambient Light Sensor
............................................................................................................................................................ 336#29, C1: Ambient Temperature Meter
............................................................................................................................................................ 337#30, C1: Ambient Humidity/Temperature Meter
............................................................................................................................................................ 338#31, C1: PIC Coprocessor ............................................................................................................................................................ 340#35, C1: Barometric Pressure Sensor
............................................................................................................................................................ 341#36, C1: 3-axis Accelerometer
............................................................................................................................................................ 342#37, C1: RF Connector ............................................................................................................................................................ 343#38: C1: Pushbutton ............................................................................................................................................................ 344#39-1~4, C1: Large LED (Four Colors Available)
............................................................................................................................................................ 345#40-1~4, M1S: Digital Potentiometer (Four Nominals)
............................................................................................................................................................ 346#41, C1: 8-bit Port ............................................................................................................................................................ 347#42, M1S: RTCand NVRAMWith Backup
............................................................................................................................................................ 349#44-1, H2: Isolated RS232/422/485 Port (DB9MConnector)
............................................................................................................................................................ 352#44-2, H2: Isolated RS232/422/485 Port (Terminal Block)
............................................................................................................................................................ 355#45-1~3, H2: LTE(4G) Modem
............................................................................................................................................................ 360#47, H2: GPRS Modem[DEPRECATED]
............................................................................................................................................................ 363#48, H2: Audio In/Out [DEPRECATED]
............................................................................................................................................................ 365#49, C2: Micro SDCard Slot [DEPRECATED]
............................................................................................................................................................ 366#50, C1: Mini Type B USB Port [DEPRECATED]
............................................................................................................................................................ 367#51, M1S: CANBus [DEPRICATED]
............................................................................................................................................................ 368#52, M2S: Four-channelIsolated +/-10V ADC
............................................................................................................................................................ 370#53, M2S: Isolated 4-20mA ADC
............................................................................................................................................................ 372#54, M1S: Four Dry Contact Inputs
............................................................................................................................................................ 373#56, C1: Type A USB Port [DEPRECATED]
............................................................................................................................................................ 374#57, M1S: FPGA Tibbit .......................................................................................................................................................... 375Resetting and Initializing the Onboard FPGA
.......................................................................................................................................................... 376Implemented Configurations ....................................................................................................................................................... 376Smart LEDController Configuration
............................................................................................................................................................ 378#58, M1S: Two 24V NPNIsolated Open Collector Outputs
............................................................................................................................................................ 380#59, M1S: Two 24V PNPIsolated Open Collector Outputs
................................................................................................................................... 381Tibbo Project PCBs(TPPs)

Programmable Hardware Manual (PHM)VII
© Tibbo Technology Inc.
............................................................................................................................................................... 382Available TPP Models ............................................................................................................................................................ 382Size 2 Tibbo Project PCB (TPP2), Gen 2
.......................................................................................................................................................... 386Tiles, Sockets, Connectors, Controls
............................................................................................................................................................ 387Size 3 Tibbo Project PCB (TPP3), Gen 2
.......................................................................................................................................................... 390Tiles, Sockets, Connectors, Controls
............................................................................................................................................................ 391Size 2 Tibbo Project PCB (TPP2)
.......................................................................................................................................................... 394Tiles, Sockets, Connectors, Controls
............................................................................................................................................................ 395Size 3 Tibbo Project PCB (TPP3)
.......................................................................................................................................................... 397Tiles, Sockets, Connectors, Controls
............................................................................................................................................................ 398Size 3 Linux Tibbo Project PCB (LTPP3)
.......................................................................................................................................................... 400Tiles, Sockets, Connectors, Controls
.......................................................................................................................................................... 401Network Configuration .......................................................................................................................................................... 402Firmware Updates ............................................................................................................................................................ 405Size 3 Linux Tibbo Project PCB (LTPP3), Gen 2
.......................................................................................................................................................... 407Tiles, Sockets, Connectors, Controls
.......................................................................................................................................................... 408Plus1 (SP7021) CPU .......................................................................................................................................................... 410Firmware Updates ............................................................................................................................................................ 410Common Information .......................................................................................................................................................... 411Power Arrangement .......................................................................................................................................................... 411Ethernet Port .......................................................................................................................................................... 411MDand RSTButtons .......................................................................................................................................................... 412LEDs .......................................................................................................................................................... 414Buzzer .......................................................................................................................................................... 414LCDDisplay Connector (TPP2 only)
.......................................................................................................................................................... 414Keypad Connector (TPP2 only)
.......................................................................................................................................................... 415Optional Wi-Fi Interface
................................................................................................................................... 416Tibbo Project Box (TPB) Kits
............................................................................................................................................................... 417TPBStructure ............................................................................................................................................................... 418Available Tibbo Project Box Kits
............................................................................................................................................................ 418Size 2 Tibbo Project Box (TPB2)
.......................................................................................................................................................... 419TPB2 Parts and Accessories
.......................................................................................................................................................... 420Size 2 Vibration Protection Kit (VPK)
.......................................................................................................................................................... 421Mechanical Dimensions ............................................................................................................................................................ 421Size 2 Project Box With LCD/Keys (TPB2L)
.......................................................................................................................................................... 422TPB2L Parts and Accessories
.......................................................................................................................................................... 423Size 2 Vibration Protection Kit (VPK)
.......................................................................................................................................................... 424Mechanical Dimensions ............................................................................................................................................................ 425Size 3 Tibbo Project Box (TPB3)
.......................................................................................................................................................... 426TPB3 Parts and Accessories
.......................................................................................................................................................... 427Size 3 Vibration Protection Kit (VPK)
.......................................................................................................................................................... 428Mechanical Dimensions ............................................................................................................................................................ 428Size 3 Linux Tibbo Project Box (LTPB3)
.......................................................................................................................................................... 429LTPB3 Parts and Accessories
.......................................................................................................................................................... 430Size 3 Vibration Protection Kit (VPK) for LTPB3
.......................................................................................................................................................... 431Mechanical Dimensions
................................................................................................................................... 432Retail Packaging
............................................................................................................................................................... 433TPB2/TPS2 Retail Packaging Kit
............................................................................................................................................................... 434TPB2L/TPS2L Retail Packaging Kit
............................................................................................................................................................... 435TPB3/TPS3 Retail Packaging Kit
............................................................................................................................................................... 436Assembled Retail Package
................................................................................................................................... 437Linux on TPS
............................................................................................................................................................... 437Serial Console ............................................................................................................................................................... 438Web Interface ............................................................................................................................................................... 442Secure Shell (SSH) ............................................................................................................................................................... 443CLI Utilities
External Controllers 444

VIIIContents
© Tibbo Technology Inc.
................................................................................................................................... 445DS110x
............................................................................................................................................................... 448DS110x Connectors and Controls
............................................................................................................................................................ 448Power Arrangement .......................................................................................................................................................... 449DS1100 .......................................................................................................................................................... 449DS1101 .......................................................................................................................................................... 450DS1102 ............................................................................................................................................................ 451Ethernet Port ............................................................................................................................................................ 451Serial Port .......................................................................................................................................................... 451DS1100 .......................................................................................................................................................... 452DS1101 .......................................................................................................................................................... 454DS1102 ....................................................................................................................................................... 455Mapping Options for the RS232 Mode
....................................................................................................................................................... 456Mapping Options for the RS422 Mode
....................................................................................................................................................... 456Mapping Options for the RS485 Mode
............................................................................................................................................................ 456Flash and EEPROMMemory............................................................................................................................................................ 457Buzzer (DS1101 and DS1102)
............................................................................................................................................................ 457Optional Wi-Fi (DS1101 and DS1102)
............................................................................................................................................................ 458Optional OLEDDisplay (DS1101 and DS1102)
............................................................................................................................................................ 459LEDBar (DS1101 and DS1102)
............................................................................................................................................................ 460DINRail and Wall Mounting Plates
............................................................................................................................................................... 461Ordering Info and Specifications
................................................................................................................................... 464DS1206
............................................................................................................................................................... 466DS1206 Connectors and Controls
............................................................................................................................................................ 466Power Arrangement ............................................................................................................................................................ 467Ethernet Port ............................................................................................................................................................ 468Multi-channel RS232 Port ............................................................................................................................................................ 469Flash and EEPROMMemory
............................................................................................................................................................... 470Ordering Info and Specifications
................................................................................................................................... 471DS1202
............................................................................................................................................................... 473DS1202 Connectors and Controls
............................................................................................................................................................ 474Power Arrangement ............................................................................................................................................................ 474Ethernet Port ............................................................................................................................................................ 474Multi-Channel RS232 Port ............................................................................................................................................................ 476Flash and EEPROMMemory
............................................................................................................................................................... 477Ordering Info and Specifications
................................................................................................................................... 478DS10xx
............................................................................................................................................................... 479Common Features of the DS10xx Family
............................................................................................................................................................ 479Secondary Cover ............................................................................................................................................................ 481DINRail Mounting ............................................................................................................................................................... 481DS10x0, DS10x2, DS10x3 (4 Serial Ports)
............................................................................................................................................................ 482Ordering Info and Specifications
............................................................................................................................................................... 484DS10x4 (Analog I/O) ............................................................................................................................................................ 485Ordering Info and Specifications
............................................................................................................................................................... 486DS10x5 (Digital I/O) ............................................................................................................................................................ 487Ordering Info and Specifications
Sensors (Probes) 488
................................................................................................................................... 488RS485 ModbusSensors("BusProbes")
............................................................................................................................................................... 489Connectors and Controls
............................................................................................................................................................... 490Modbus Registers of Bus Probes
............................................................................................................................................................... 494Setting Up and Testing Bus Probes
............................................................................................................................................................... 494Setting Modbus IDs ............................................................................................................................................................... 495Updating Probe Firmware
............................................................................................................................................................... 497Status LEDs ............................................................................................................................................................... 499Outline Dimensions ............................................................................................................................................................... 499Ordering Info and Specifications

Programmable Hardware Manual (PHM)IX
© Tibbo Technology Inc.
................................................................................................................................... 501Cable Probes
............................................................................................................................................................... 502Wire Connections ............................................................................................................................................................... 503Testing Cable Probes ............................................................................................................................................................... 503Outline Dimensions ............................................................................................................................................................... 504Ordering and Specifications
Companion Products 505
................................................................................................................................... 505WA2000
............................................................................................................................................................... 507Connector Pin Assignment
............................................................................................................................................................... 508Connecting WA2000 to Tibbo Devices
............................................................................................................................................................... 509Status LED ............................................................................................................................................................... 509Firmware Upgrades ............................................................................................................................................................... 510Mechanical Dimensions
............................................................................................................................................................... 511Ordering Info and Specifications
................................................................................................................................... 512GA1000
............................................................................................................................................................... 513Connector pin assignment
............................................................................................................................................................... 514Connecting GA1000 to Tibbo Devices
............................................................................................................................................................... 516Status LED ............................................................................................................................................................... 517Mechanical Dimensions
............................................................................................................................................................... 518Ordering Info and Specifications
................................................................................................................................... 519RJ203 Jack/MagneticsModule
............................................................................................................................................................... 519Interface Pads ............................................................................................................................................................... 520Interfacing the RJ203 to the DM9000B
............................................................................................................................................................... 521Using the RJ203 With the EM203 and Other Modules
............................................................................................................................................................... 522Mechanical Dimensions: RJ203
............................................................................................................................................................... 523Mechanical Dimensions: RJ203+EM203
............................................................................................................................................................... 524Mechanical Dimensions: RJ203+EM1206
............................................................................................................................................................... 525Ordering Info and Specifications
Accessories 526
................................................................................................................................... 526WAS-P0004(B) DS-to-Device Serial Cable
................................................................................................................................... 526WAS-P0005(B) DS-to-PC Serial Cable
................................................................................................................................... 527WAS-1499 'Straight' Ethernet Cable
................................................................................................................................... 527WAS-1498 'Crossover' Ethernet Cable
................................................................................................................................... 52712VDC Power Adaptors
................................................................................................................................... 528TB100 Terminal Block Adaptor
................................................................................................................................... 529TB1000 Terminal Block Adaptor
................................................................................................................................... 530TB1004 Test Board
................................................................................................................................... 532TB1005 Test Board
Setup (MD) Button (Line) 533
Status LEDs (LED Control Lines) 534
Monitor/Loader (M/L) 535
................................................................................................................................... 536Update Modes
................................................................................................................................... 537Update Mode Selection Flowchart
................................................................................................................................... 540XModem Serial Updates
............................................................................................................................................................... 542TPS Devices ............................................................................................................................................................... 543Programmable Serial Controllers
............................................................................................................................................................... 543Programmable Boards and Modules

XContents
© Tibbo Technology Inc.
................................................................................................................................... 544Ethernet Updates
................................................................................................................................... 546BLE (Bluetooth Low-Energy) Updates
Prolonging and Estimating
EEPROM Life 552
Update history 553

1 Programmable Hardware Manual (PHM)
© Tibbo Technology Inc.
Introduction
Last update: 17AUG2020
Legal Information | Common vs. Proprietary Knowledge | Manual Update History
This Manual has the following sections:
· Embedded Modules
· Boards
· Development Systems
· Tibbo Project System (TPS)
· External Controllers
· Sensors
· Companion Products
· Kits and Accessories
Important notes:
· This manual should be used in conjunction with the TIDE, TiOS, Tibbo BASIC, and
Tibbo C Manual — a separate resource that documents Tibbo BASIC/C, TIDE
software, hardware "platforms," and everything else required for successful
development of Tibbo BASIC/C applications.
· This manual does not include any information on fixed-function, non-programmable
Tibbo devices, such as the original EM100 module or the DS100 serial device
server. The data on these devices can be found in the "Serial-over-IP Solutions
Manual" — a separate document.
· Some Tibbo devices are dual-use in nature. Depending on the loaded firmware,
any dual-use product can be a fixed-function, serial-over-IP device, or a BASIC-
programmable controller. Dual-use devices are documented in this manual as well
as the "Serial-over-IP Solutions Manual". This manual describes each such device
as a BASIC-programmable one, while the "Serial-over-IP Solutions Manual"
describes the same device as a serial device server.
Legal Information
Tibbo Technology ("TIBBO") is a Taiwan corporation that designs and/or manufactures
a number of hardware products, software products, and applications ("PRODUCTS"). In
many cases, Tibbo PRODUCTS are combined with each other and/or third-party
products thus creating a PRODUCT COMBINATION.
Whereas you (your Company) wish to purchase any PRODUCT from TIBBO, and/or whereas you
(your Company) wish to make use of any documentation or technical information published
by TIBBO, and/or make use of any source code published by TIBBO, and/or consult TIBBO and
receive technical support from TIBBO or any of its employees acting in an official or unofficial
capacity,
You must acknowledge and accept the following disclaimers:
1. Tibbo does not have any branch office, affiliated company, or any other form of
presence in any other jurisdiction. TIBBO customers, partners and distributors in

2Legal Information
© Tibbo Technology Inc.
Taiwan and other countries are independent commercial entities and TIBBO does
not indemnify such customers, partners or distributors in any legal proceedings
related to, nor accepts any liability for damages resulting from the creation,
manufacture, importation, advertisement, resale, or use of any of its PRODUCT or
PRODUCT COMBINATION.
2. BASIC/C-programmable devices ("PROGRAMMABLE DEVICES") manufactured by
TIBBO can run a variety of applications written in Tibbo BASIC, Tibbo C, or a
combination of the two ("BASIC APPLICATIONS"). Combining a particular
PROGRAMMABLE DEVICE with a specific BASIC and/or C APPLICATION, either
written by TIBBO or any third party, may potentially create a combinatorial end
product ("END PRODUCT") that violates local rules, regulations, and/or infringes an
existing patent granted in a country where such combination has occurred or
where the resulting END PRODUCT is manufactured, exported, advertised, or sold.
TIBBO is not capable of monitoring any activities by its customers, partners or
distributors aimed at creating any END PRODUCT, does not provide advice on
potential legal issues arising from creating such END PRODUCT, nor explicitly
recommends the use of any of its PROGRAMMABLE DEVICES in combination with any
BASIC APPLICATION, either written by TIBBO or any third party.
3. TIBBO publishes a number of BASIC and/or C APPLICATIONS and segments thereof
("CODE SNIPPETS"). Such APPLICATIONS and CODE SNIPPETS are provided "as is"
without warranty of any kind, either expressed or implied, including, but not limited
to, the implied warranties of merchantability and fitness for a particular purpose.
The entire risk as to the quality and performance of said APPLICATIONS and CODE
SNIPPETS resides with you. The APPLICATIONS and CODE SNIPPETS may be used
only as a part of a commercial device based on TIBBO hardware. Modified code
does not have to be released into the public domain, and does not have to carry a
credit to TIBBO. APPLICATIONS and CODE SNIPPETS are provided solely as coding
aids and should not be construed as any indication of the predominant,
representative, legal, or best mode of use for any PROGRAMMABLE DEVICE.
4. BASIC/C-programmable modules ("PROGRAMMABLE MODULES"), such as the EM1000
device, are shipped from TIBBO in either a blank state (without any APPLICATION
loaded), or with a simple test APPLICATION aimed at verifying correct operation of
a PROGRAMMABLE MODULE's hardware. All other BASIC/C-programmable products
including boards, external controllers, and developments systems ("NON-MODULE
PRODUCTS"), such as the DS1000 and NB1000, are normally shipped with an
APPLICATION preloaded. This is done solely for the convenience of testing by the
customer and the nature and function of the preloaded APPLICATION shall not be
construed as any indication of the predominant, representative, or best mode of
use for any such NON-MODULE PRODUCT.
5. All specifications, technical information, and any other data published by TIBBO are
subject to change without prior notice. TIBBO assumes no responsibility for any
errors or omissions in the information TIBBO publishes, and does not make any
commitment to update any published information. TIBBO further assumes no
responsibility for any failures to inform its customers about potential limitations or
pitfalls of using TIBBO PRODUCTS. As a condition of using TIBBO PRODUCTS you
agree to accept full responsibility for the decisions you make regarding the use and
the mode of use of TIBBO PRODUCTS. You further agree that it is not the

3 Programmable Hardware Manual (PHM)
© Tibbo Technology Inc.
responsibility of TIBBO to relate to you or teach you the knowledge that is
considered to belong to the accepted body of knowledge for the electronic
engineering and information technology professions.
6. Any technical advice provided by TIBBO or its personnel is offered on a purely
technical basis, does not take into account any potential legal issues arising from
the use of such advice, and should not be construed as a suggestion or indication
of the possible, predominant, representative, or best mode of use for any Tibbo
PRODUCT.
7. Any advance product or business information posted as news or updates of any
kind (including Tibbo Blog posts, Tibbo Newsflashes, site news, forum posts and
any other timely information posted by Tibbo personnel) shall not be construed as
obligatory to TIBBO in any way, shape or form. TIBBO may change or delay any of
its plans and product roadmaps without prior notice, and shall not be held liable for
such changes.
8. Neither TIBBO nor its employees shall be held responsible for any damages resulting
from the creation, manufacture, or use of any third-party product or system, even
if this product or system was inspired, fully or in part, by the advice provided by
Tibbo staff (in an official capacity or otherwise) or content published by TIBBO or
any other third party.
9. TIBBO may make non-English documentation or other information available at its
discretion. Such texts may be the result of work done by third parties, and may not
always be reviewed by TIBBO personnel. As such, these are not to be considered
official statements by TIBBO. Any apparent inaccuracies, conflicts or differences in
meaning between English-language and non-English texts shall always be resolved
in favor of the English-language version.
10. TIBBO reserves the right to halt the production or availability of any of its
PRODUCTS at any time and without prior notice. The availability of a particular
PRODUCT in the past is not an indication of the future availability of this PRODUCT.
The sale of the PRODUCT to you is solely at TIBBO's discretion and any such sale
can be declined without explanation.
11. TIBBO makes no warranty for the use of its PRODUCTS, other than that expressly
contained in the Standard Warranty located on the Company's website. Your use of
TIBBO PRODUCTS is at your sole risk. TIBBO PRODUCTS are provided on an "as is"
and "as available" basis. TIBBO expressly disclaims the warranties of
merchantability, future availability, fitness for a particular purpose and non-
infringement. No advice or information, whether oral or written, obtained by you
from TIBBO shall create any warranty not expressly stated in the Standard
Warranty.
12. LIMITATION OF LIABILITY. BY USING TIBBO PRODUCTS YOU EXPRESSLY AGREE
THAT TIBBO SHALL NOT BE LIABLE TO YOU FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING, BUT
NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS, GOODWILL, OR OTHER
INTANGIBLE LOSSES (EVEN IF TIBBO HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES) RESULTING FROM THE USE OR THE INABILITY TO USE OF TIBBO
PRODUCTS.

4Legal Information
© Tibbo Technology Inc.
13. "Tibbo" is a registered trademark of Tibbo Technology, Inc.
14. Terms and product names mentioned on TIBBO website or in TIBBO documentation
may be trademarks of others.
Common vs. Proprietary Knowledge
All Tibbo documentation is created with briefness in mind. No one has time for
bloated manuals.
In deciding what should and should not be in this Manual, I generally apply the
"common engineering knowledge vs. proprietary knowledge" judgment.
"Common engineering knowledge" comprises facts that are widely known in the
engineering community.
Such facts are typically disseminated through the Internet, taught in technical
schools (colleges, universities) and are generally considered to fall into the
accepted body of knowledge for the electronic engineering and information
technology professions.
In simple terms, if you can easily Google something, and you get plenty of search
results from multiple sources, and these results largely agree on the subject, then
this "something" falls into the "common engineering knowledge" domain.
"Proprietary knowledge," on the other hand, comprises facts that originate from a
particular vendor, such as Tibbo.
Proprietary knowledge is something that, unless Tibbo tells the world about it, you
won't know and won't be able to find the information on from any other source.
To keep the size of this Manual to the minimum, I strive to exclude, where possible,
all "common engineering knowledge."
You don't need to learn the common stuff from me. If you don't know something —
Google it.
Example:
Let's suppose Tibbo makes an embedded module that has a number of I/O lines, and
these lines are of the CMOS type.
Proprietary knowledge here is that I/O lines on the module are of the CMOS type. I
need to tell you this, because if I don't tell you then you don't have any other way
to find out (except through guessing or reverse-engineering my product).
Public engineering knowledge is everything else that there is to know about "CMOS
I/O lines." I believe that the body of engineering knowledge includes the general
understanding of what "CMOS" means. It also includes the whole culture of working
with CMOS lines, of preventing them from failing, of designing the products that
utilize CMOS lines in the right way, etc. etc. It is not my job to explain any of this
to you.
Bottom line: This manual is not an encyclopedia, nor it is a school textbook. It is a
brief source of Tibbo's proprietary knowledge.

5 Programmable Hardware Manual (PHM)
© Tibbo Technology Inc.
Think something is missing from this manual? Let me know! My email is
[e-mail].
Embedded Modules
The following embedded modules are currently being offered by Tibbo:
· EM2000
· EM1000
· EM1206
· EM510
· EM500
· EM1202
· EM200*
* The EM200 module is a dual-use device. For best results, use the EM1000 and
EM1202 modules based on the new T1000 ASIC developed by Tibbo.
EM2000 BASIC/C-programmable IoT Module
Introduction
The EM2000 is Tibbo's fastest, as well as the most powerful and versatile BASIC/C-
programmable IoT module. The module is a high-performance upgrade to our popular
EM1000 device.
The module's hardware features include 100/10BaseT Ethernet port, four serial ports
supporting UART, Wiegand, and clock/data modes, four I2C/SPI ports, onboard
flash, EEPROM, RTC, and up to 56 I/O lines.
The EM2000 is also excellent for prototyping your projects — it has the standard pin
pitch of 2.54mm (0.1").
The EM2000 is fully supported by Tibbo IDE software and a dedicated EM2000
platform that covers all hardware facilities of the module (see TIDE, TiOS, Tibbo
BASIC, and Tibbo C Manual). For convenient testing and evaluation Tibbo offers

6Embedded Modules
© Tibbo Technology Inc.
EM1000TEV and EM1000EV development systems (they are compatible with the
EM2000 module). The EM2000 can also support Wi-Fi and GPRS communications.
EM2000 advantages over the EM1000 module
The EM2000 is a high-performance upgrade to our EM1000 device. Here is small list
of important improvements:
· 32-bit architecture (vs. 16-bit architecture of the EM1000).
· 5 to 80 times better performance, depending on the calculations and variable
types.
· 7 times faster GPIO manipulation.
· 3 times larger available user SRAM (66KB vs. 22KB).
· 1.5-3.0 times faster graphics.
· 2.2 times lower power consumption (100mA vs. 220mA).
· 2 times larger flash memory (1MB for TiOS/code + 1MB for the file system vs. 1MB
total for TiOS, code, and file system).
· 56 I/O lines (vs. 54 lines on the EM1000).
· 4-channel ADC.
· The ability to update TiOS firmware and compiled Tibbo BASIC/C app over-the-air
(this requires the WA2000 and an iOS or Android device).
Hardware features
· 32-bit architecture.
· Powered by Tibbo OS (TiOS).
· 10/100BaseT auto-MDIX Ethernet port (automatic detection of "straight" and
"cross" cables). Standard Ethernet magnetics are NOT integrated into the module.
· Optional Wi-Fi interface (requires the WA2000 add-on module to be connected).
· Optional BLE interface (requires the WA2000 add-on module).
· Can control a GPRS modem* (such as the SIM900).
· Four high-speed serial ports (CMOS-level):
- Baudrates of up to 460,800bps;
- None**/even/odd/mark/space parity modes;
- 7**/8 bits/character;
- Full-duplex mode with RTS/CTS and XON/XOFF flow control;
- Half-duplex mode with direction control;
- Encoding and decoding of Wiegand and clock/data streams.
· 56 general-purpose I/O lines; 8 lines can work as interrupts.
· Square wave output (can be used for buzzer* control).
· 4-channel ADC.
· 4 synchronous serial ports with SPI and I2C modes.
· Supports a 320x240 TFT LCD*.
· Supports matrix and binary output keypads*.

7 Programmable Hardware Manual (PHM)
© Tibbo Technology Inc.
· RTC with dedicated backup power input.
· 66KB SRAM for Tibbo BASIC/C variables and data.
· 1MB flash for TiOS and application code.
· Additional 1MB flash for the hardened fault-tolerant file system.
· 2048-byte EEPROM for data storage.
· Three status LEDs onboard:
- Green and red main status LEDs;
- Yellow Ethernet link LED.
· Four control lines for external status LEDs:
- Two control lines for green and red main status LEDs;
- Two control lines for Ethernet "link" and "100Mb" LEDs.
· Software-controlled PLL allows selecting full, medium, or low speed.
· Reliable power-on/ brown-out reset circuit.
· Power: 100mA @ 3.3V (100BaseT mode, full speed).
· Dimensions (LxWxH): 38.4 x 28.4 x 5.5mm.
· Prototyping-friendly 2.54mm (100mil) pin pitch.
· Operating temperature range: -40 ~ +80 C.
· Firmware and compiled Tibbo BASIC/C app can be updated through:
oThe serial port;
oEthernet LAN; or
oOver-the-air (this requires the WA2000 and an iOS or Android device).
· Tibbo BASIC/C application can be debugged through the Ethernet LAN (no
additional debugging hardware is required).
· CE- and FCC-certified.
* Must be connected externally.
** The EM2000 does not support the combination of 7 bits/character mode and the
"none" parity mode.
Programming features
· Platform objects:
- adc — provides access to four ADC channels.
- beep — generates buzzer patterns.
- bt — in charge of the BLE (Bluetooth Low-Energy) interface.
- button — monitors the MD (setup) line.
- fd — manages the flash memory file system and direct sector access.
- io — handles I/O lines, ports, and interrupts.
- kp — works with matrix and binary keypads.
- lcd — controls the LCD.
- net — controls the Ethernet port.
- pat — "plays" patterns on up to five LED pairs.

8Embedded Modules
© Tibbo Technology Inc.
- ppp — accesses the Internet over a serial modem (GPRS, etc.).
- pppoe — accesses the Internet over an ADSL modem.
- romfile — facilitates access to resource files (fixed data).
- rtc — keeps track of date and time.
- ser — controls serial ports (UART, Wiegand, clock/data modes).
- sock — socket comms (up to 32 UDP, TCP, and HTTP sessions).
- ssi — controls serial synchronous interface channels (SPI, I2C...).
- stor — provides access to the EEPROM.
- sys — in charge of general device functionality.
- wln — handles the Wi-Fi interface.
· Variable Types: Byte, char, integer (word), short, dword, long, real, string, plus
user-defined arrays and structures.
· Function groups: String functions, trigonometric functions, date/time conversion
functions, encryption/hash calculation functions, and more.
Detailed Device Info
Note: "SPI connector" is now referred to as "wireless add-on port"
See these topics for more information on various hardware facilities of the EM2000:
· General-purpose I/O Lines
· Wireless Add-on port, Wi-Fi Communications

9 Programmable Hardware Manual (PHM)
© Tibbo Technology Inc.
· Ethernet Port Lines
· Serial Ports
· Analog-to-digital Converter (ADC)
· I2C/SPI Support (Serial Synchronous Interface Channels)
· Square Wave Generator
· Flash and EEPROM Memory
· Real-time Clock (RTC)
· LED Lines
· External LCD Support
· External Keypad Support
· Power, Reset, PLL Control, and Mode Selection Lines
I/O pin assignment
Notes (refer to superscript numbers placed after pin #):
1. This line is 5V-tolerant and can be interfaced to 5V CMOS devices directly.
2. This line can be mapped to serve as an RTS, W0 output, or CLOCK output line of
a serial port. The line can also be assigned to an I2C/SPI channel, or act as an
interface line of the Wi-Fi add-on module, keypad, or an LED control channel.
3. This line can serve as a CTS, W0&1 input, or CLOCK input line of a serial port.
4. This pin is on the wireless add-on port. EM2000-...-A devices have a connector
header facing down (towards the host PCB). "-T" devices have a female
connector facing up. Add-on modules, such as the WA2000 can be plugged into
this female connector. Standard EM2000 devices only have the landing pads on
the PCB, no connector is installed at the factory. You can solder the WA2000 in
by yourself or order the EM2000Nx device combination, in which case you will
receive the EM2000 with the WA2000 installed (soldered in) on top of the
module.
Pin
#
Function
Description
1(1,2)
GPIO0/P0.0/RTS0
General-purpose I/O line 0 (P0.0).
2(1,2)
GPIO1/P0.1/RTS1
General-purpose I/O line 1 (P0.1).
3(1,2)
GPIO2/P0.2/RTS2
General-purpose I/O line 2 (P0.2).
4(1,2)
GPIO3/P0.3/RTS3
General-purpose I/O line 3 (P0.3).
5(1,2)
GPIO4/P0.4/DTR0
General-purpose I/O line 4 (P0.4).
6(1,2)
GPIO5/P0.5/DTR1
General-purpose I/O line 5 (P0.5).
7(1,2)
GPIO6/P0.6/DTR2
General-purpose I/O line 6 (P0.6).
8(1,2)
GPIO7/P0.7/DTR3
General-purpose I/O line 7 (P0.7).
9(1,2)
GPIO8/P1.0/RX0
General-purpose I/O line 8 (P1.0);
RX, W1 input, and DATA input of the serial
port 0.
10
(1,2)
GPIO9/P1.1/TX0
General-purpose I/O line 9 (P1.1);
TX, W1 output, and DATA output of the
serial port 0.
11
(1,2)
GPIO10/P1.2/RX1
General-purpose I/O line 10 (P1.2);