TICWRIS GTS User manual
TICWRIS GTS
User Manual
01
Hello, dear friend, thank you for choosing TICWRIS smart watch product. Our product complies with all
applicable EU regulations, including RoHS, and CE marked. Please rest assured.
Certified Product
This product has a built-in lithium polymer battery. For your personal and property safety, it is forbidden
to use and store this product in extreme temperatures above 50C, otherwise it may cause fire or other
safety accidents.
Product Safety
Charge your watch fully before using it for the first time. Please charge your watch with the original
charger lead whenever possible. It should be charged to 5V / 500mAh and no more than 5V / 1A.
Charge
This product has a rating of IP68 waterproof, and is resistant to rain, splash and is possible to swim in
2 meters’ deep water. However, don't expose your watch to pressurized warm water or corrosive liquid.
The waterproof function is disabled if the user disassembles the watch by himself.
Waterproof
02
TICWRIS offers 1-year warranty starts from receiving purchase. We offer replacement, repair, remote
connection, send spare parts to help you resolve certain types of problems. If you have any after-sales
After-Sales Service
Welcome to visit TICWRIS website www.ticwris.com for more products and service information.
TICWRIS Website
03
Specifications:
TICWRIS GTS
Display
Model
Touch Screen
Housing
Strap
Processor
Memory
Battery
Standby Time
Water proof
Bluetooth
Phone System
G-Sensor
Heart Rate Sensor
Pedometer
GPS
1.3” TFT 240*240
Capacitive touch screen
Plastic
Silicone 20mm
nRF52832
64Kb+512Kb
160mAh
Daily use 5 days/Standby 20 days
IP68
Ver4.0
Above Android 5.1 & ios 9.0
Yes
Yes
Yes
N/A
04
Appearance
Power Button
05
Charger Pin
Temperature Contactor
06
Scan the following QR code with your phone to download the LinkTo Sport App.
Connect the Watch
※Keep in mind that turning on all the permissions to allow this application on your phone to run
functionality.
07
Open the app you could register with Login, from a third-party site using Login or login without
registration.
In LinkTo Sport, click on the " " icon below, then click on the watch in the first column and select the
GTS model on the right. At this time, your phone is ready to scan.
08
www.ticwris.com
※Note: If your phone is in standby for a long time. This app may be closed automatically by the system.
Please reopen the app to connect the watch.
09
Then enter the menu on your watch, open the QR-code, use your phone to scan the QR code to
connect.
10
Set message notification types according to personal needs.
LinkTo Sport Settings
11
Set sedentary reminder.
12
Set heart rate monitorning in real time.
There are more functions that can be set in LinkTo.
Power on / off: long press the power button for 3s to power on / off
Basic watch operation
13
14
On the dial interface, long press the dial for about 3s to switch between different style dials.
Replace the dial
1. Enter the temperature application in the menu.
2. Precautions for reading: Please do not check the temperature in extremely high or low-temperature
environments. Click “ ” after reading.
3. The body temperature can be measured in about 3-5 seconds.
Temperature Check
※Note:
1. This product is not a medical device. The test data is for reference only and cannot be used on a
clinical basis.
2. Please start to test the body temperature after wearing the watch for more than 1 hour.
3. The temperature taken in the arm will be 0.3-0.7℃less than oral reading.
15
Table of contents
