Tidal Camden-49 User manual

Instructions for opening of drawer cavity to allow convenient
access for plumbing installation
1
Remove all three drawers.
To avoid the possible inconvenience of
readjustment upon reinstallation, please take note
and identify each drawer as the topmost, middle,
and bottommost.
2
Using a Phillips head screwdriver, remove the rear
screws that secure each bar to the main frame
Each bar is attached to the main frame by a single
screw on the left and a single screw on the right
3
After the screws have been loosened, you can
remove the two bars that connect to the main
frame
To avoid alignment issues upon
re-installation, please note the orientation and
order of each bar to ensure it is returned to its
original position later

4
Now you have a conveniently large opening in
which to complete your plumbing
5
After the plumbing installation has been
completed, please re-install the bars
Re-install each bar in the same original orientation
and order as in noted Step 3
6
Reinstall drawers.
Remember to install each drawer into its original
position (top, middle, and bottom position) as
noted in Step 1