Article FANTOL User manual

Assembly Instructions
FANTOL
Storage Shelf
VERSION 1.1

ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
FANTOL Storage Shelf Page 2 of 12
1 hour
2
TIME # OF PEOPLE DIFFICULTY
REQUIRED TOOL
ANTI-TIP
Installation Required
ANTI-TIP KIT INVENTORY
ID DESCRIPTION QTY
BRACKET 2
M8 ×51MM PLUG 2
M6 ×70MM SCREW 2
M4 ×20MM SCREW 2
WASHER 2
PARTS INVENTORY
ID DESCRIPTION QTY
LEFT SIDE FRAME 1
RIGHT SIDE FRAME 1
TOP SHELF 1
SECOND SHELF 1
CABINET 1
INNER CABINET SHELF 1
CAM LOCK SCREW 32
WOOD DOWEL 20
CAM LOCK NUT 32
ALLEN KEY 1
SHELF PIN 4
Hardware (M/N) to attach brackets to wall is
designed for drywall. To attach this unit to another
type of wall, consult with your local hardware store.

Page 3 of 12
ASSEMBLED UNIT
FANTOL Storage Shelf

Page 4 of 12
1
× 32
FANTOL Storage Shelf

Page 5 of 12
2
Insert 3 wood dowels
for cabinet.
Insert 2 wood dowels
for top 2 shelves.
!
!
× 4 × 6
FANTOL Storage Shelf

Page 6 of 12
Remove drawers from cabinet (E) before assembling with side frames.
Press lever down on left side of drawer and up on right
side of drawer at the same time to release and lift out.
!
!
FANTOL Storage Shelf
3

Page 7 of 12
4
Cam lock nut starting position: arrow pointing
downwards, towards screw head.
Cam lock nut end position: arrow facing upwards.
!
× 16
FANTOL Storage Shelf

Page 8 of 12
5
× 10
Insert 2 wood dowels into
top 2 shelves (C/D), and
6 into cabinet (E).
!
FANTOL Storage Shelf

Page 9 of 12
6
× 16
Insert cam lock nuts (I) and turn with
allen key (J) to secure.
Ensure cam lock nuts are also secured
on the backs of each shelf.
!
FANTOL Storage Shelf

Page 10 of 12
FANTOL Storage Shelf
7
× 4
Insert shelf pins (K) at desired height
and secure shelf (F) on pins.
!

Page 11 of 12
WARNING!
ANTI-TIP RESTRAINT INSTALLATION
Serious or fatal crushing injuries can occur from furniture
tip-over. To help prevent tip-over:
• Install tip-over restraint provided.
• Do not set heavy objects on top of this product,
unless the product is specifically designed to
accomodate them.
• Never allow children to climb or hang on mirrors,
shelves, consoles, or cabinets with doors and/or
drawers.
Use of tip-over restraints may only reduce but not
eliminate, the risk of tip-over.
20 min
3
TIME
REQUIRED TOOL
# OF PEOPLE DIFFICULTY
REQUIRED TOOL
8MM / 5/16" DRILL BIT
1
× 2
Place unit in desired location and mark on
wall where holes should be drilled.
FANTOL Storage Shelf

Page 11 of 12
2
3
× 2 × 2× 2
Drill holes into drywall, insert wall plugs (M),
and attach unit to wall with screws (N).
Move shelf up against wall and attach
brackets to top shelf from above.
× 2
Hardware (M/N) to attach brackets to wall is designed for drywall. To attach
this unit to another type of wall, consult with your local hardware store.
FANTOL Storage Shelf