Tiger LOG STORE User manual

TIGER
LOG STORE
GENERAL ASSEMBLY
INSTRUCTIONS
TIG/INS67

BEFORE YOU GET STARTED
PLEASE READ INSTRUCTIONS CAREFULLY
• Check the pack and make sure you have all the parts listed.
• When you are ready to start, make sure you have the right tools at hand (not supplied).
• Ensure there is plenty of space and a clean dry area for assembly.
TIMBER
As with all natural materials, mber can be aected during various weather condions. For the duraon of
heavy or extended periods of rain, swelling of the wooden panels may occur. Warping of the wood may also
occur during excessive dry spells due to an interior moisture loss. Unfortunately, these processes cannot be
avoided but can be migated. It is suggested that the outdoor building is sprayed with water during extended
periods of warm sunshine and sheltered as much as possible during rain or snow.
To validate your guarantee and ensure longevity of the product, it is ESSENTIAL that your building is treated
with a suitable wood preserver or paint AFTER assembly, both internally and externally, then annually
thereaer.
BUILDING A BASE
Care must be taken to ensure the product is placed on a suitable base. When thinking about where the building
and base is going to be constructed, ensure that there will be access to all sides for maintenance work and
annual treatment.
Ensure the base is rm and level and is built on rm ground, to prevent distoron.
The constructed base must be at least the size of the product as referenced in supplied construct diagram. It is
also recommended that the oor be at least 25mm above the surrounding ground level to avoid ooding.
RECOMMENDED TYPES OF BASE
• Durable plasc grid.*
• Concrete 75mm laid on top of 75mm hard-core.
• Slabs laid on 50mm of sharp sand.
• Timber base - Self constructed/Buy pre-made.
*We recommend a Fastt EcoBase for your building. It is durable, lightweight, exible, and easy to put in place.
Please see gersheds.com for details.
WOOD WARPING
MAY OCCUR
WINTER
EXPANSION
SUMMER
CONTRACTION
02 gersheds.com 0113 205 4189 sales@gersheds.com
TIMBER BASECONCRETE BASE SLAB BASE BROKEN SLABS BARE SOIL LOOSE GRAVELPLASTIC BASE

Please retain instrucons for future reference
CAUTION:
All buildings should be erected
by two competent adults.
CAUTION:
It is advisable to wear safety
gloves during building installaon.
Whilst all products manufactured are made to the highest standards of safety, we cannot accept responsibility for your safety whilst erecng or
using this product.
MADE IN THE UK SINCE 1913.
We have been making our high quality,
great value garden buildings here in
Britain for decades.
03

BEFORE YOU GET STARTED
04 gersheds.com 0113 205 4189 sales@gersheds.com
TOOLS REQUIRED
We recommend using the following tools (not supplied):
SCREWDRIVER +
ASSEMBLY
• Assembly is straight forward if you follow these step-by-step instrucons.
IMPORTANT
• Before assembly, please make sure you have a suitable base ready to erect your building on.
• Your base MUST be rm and level to ensure that the building is assembled properly and is square.
• DO NOT start your build unl you have checked that all the parts of your building are present and in a suitable condion.
• Panels may have become twisted during loading/unloading and/or transportaon. Please check that all framing and cladding
are
square before beginning assembly.
• Pre-drill all screw holes to reduce the chances of the mber spling.
• If you are organising a third party to install your building, it is best pracce not to schedule this immediately on receipt of your
order, to give you me to check your delivery.
HAMMER
S50
FIXING KIT CONTENTS:
Screws (50mm Galvanised - QTY 32)
N40
Nails (40mm Galvanised - QTY 10)
DRILL SHARP KNIFE SPIRIT LEVEL
S80
Screws (80mm Galvanised - QTY 8)

Please retain instrucons for future reference
05
Unpacking The Log Store.
• Carefully remove all packaging and remove the log store components.
NOTE: PARTS MAY HAVE BECOME LOOSE OR MOVED DURING TRANSPORTATION.
• Lay components on a dry, horizontal surface.
BUILDING PACK CONTENTS:
For full details of what should be included please see the packing list supplied with the delivery. They are also
available on request in pdf form from our helpful Customer Support team – please call 0113 205 4189 for
Customer Support or use the ‘Items Delivered Query’ form at gersheds.com/contact.

Step 2:
FIX ROOF IN PLACE:
• Place roof panel on top of gables as shown. (Detail D)
• Ensure even overhang front and back.
• Secure using 1x S80 through the roof
and into the gable panels. (Detail D)
• Repeat for all 4 corners.
TIGER LOG STORE GENERAL INSTRUCTIONS
06 gersheds.com 0113 205 4189 sales@gersheds.com
A
Step 1:
SHELF & GABLE ASSEMBLY:
• Lay down shelf on its side and line up two
gable panels. (Detail A)
• Secure using 1x S80 through the shelf
and into the gable panels. (Detail B)
• Repeat for all 4 corners. Turn right
side up to aach roof. (Detail C)
C
B
S80
GABLE PANEL
GABLE PANEL
SHELF
D
S80

Step 3:
ATTACH BACK BOARDS:
• Use 4x S50 to aach the back boards to the gable panels.
• Line up back boards with the boards on
the gable panels. (Detail E)
NOTE: CHECK LOG STORE IS SQUARE AS YOU BUILD.
Please retain instrucons for future reference
07
GABLE PANEL
S50
BACK BOARD
E
Step 4:
ATTACH FASCIA BOARDS:
• Complete the look by aaching fascia boards front and rear.
• Secure ush using 5x N40 per fascia board. (Detail F)
F
FASCIA BOARD
N40

Display Agent
Woodlands DIY Store
Staon Yard,
Horsforth,
Leeds,
LS18 5NZ
Telephone: [phone]
Website: gersheds.com
Email: customersupport@gersheds.com
TIG/INS67