v
Tigercat 220D Loader
INTRODUCTION
An Operator's manual, Service manual and a Parts catalogue are made available by Tigercat to assist the dealer,
customer and operator in becoming familiar with the features of the 220D Loader.
Serial numbers:
220D 2200601–2201000
The 220D Loader is designed for log processing, sorting, log transferring and loading.
The Operator's manual will assist the operator with the techniques of proper and safe operation of the 220D Loader.
There is also important information regarding the safe operation of the attachment (if equipped). The Service manual
contains safety and servicing procedures and a preventive maintenance schedule to assist in repair and to ensure
optimum machine performance.
Section 1 in both the Operator's manual and the Service manual contains safety information that must be followed. As
well, throughout the rest of the manuals, DANGER, WARNING and CAUTION notices are displayed where necessary,
drawing attention to possible hazards when performing certain procedures.
Only trained personnel should be allowed to operate or work on the machine.
The information contained in this manual is current at time of printing. Improvements to the machine are on-going and
may not be covered, therefore in these cases contact your Tigercat dealer for the appropriate information.
Tigercat reserves the right to make changes to the machine after this manual release date that may not immediately
appear in this manual.
If the machine in question was built after the release date of this manual and there is a discrepancy, call Tigercat
service department.
Tigercat reserves the right to change information contained herein at any time without prior notice.
Tigercat Industries Inc.
INTRODUCTION ................................................................................................................................................ v