Tiiwee TWWS01 User manual

tiiwee
tiiwee is a registered brand of Tiiwee B.V., The Netherlands. All rights reserved. No part of this document may
be reproduced or transmitted in any form or by any means or stored in any retrieval system of any nature
without prior written permission.
Quick Reference Guide - Tiiwee Home Alarm System - Door&Window sensor
Connect a tiiwee door & window sensor to the A1 or A2 Siren in 4 easy steps:
A2 Motion Detector Siren
A1 Siren (Home Alarm
Starter Kit)
STEPS
1.
Enter the pairing mode by
pressing the SET button for 5
seconds.
A1 Siren: All 4 LED's are now
on
A2 Siren: The detection
window is lit continuously. This
means that the A2 is in ready
to be connected to a door
sensor.
2.
A1 Siren only: Short press the
SET button to select a zone.
The top LED is now on. Short
press again to select other
zones.
3.
Activate the door sensor(s)
by moving the magnet away
from the sensor. The light on
the sensor lights up. The A1
and A2 confirm correct
connection by 2 beeps.
4.
Press the On/Off Button on
the Alarm unit to exit the
pairing mode
IMPORTANT:
Please also refer to the user manual of the Tiiwee Home Alarm Kit or the A2 Motion Sensor
Alarm. Only use original tiiwee products to ensure compatibility.
For questions and answers, please visit us at www.tiiwee.com, our YouTube channel. We can
also be reached by Email at [email protected].