Timago TKS 2012-A User manual

USER MANUAL
Anti-decubitus bubble mattress with pump
Product code: TKS 2012-A
Anti-decubitus strip mattress with pump
Product code: TKS 2012-B1
Dear Customers,
Thank you for purchasing our product. We hope that the equipment you have selected will
meet your expectations. We would like to share some important information with you.
Timago International Group is a Polish company which distributes medical, rehabilitation and
orthopaedic products to pharmacies and medical stores.
Our mission is to ensure your comfort by offering safe, functional, and high-quality products.
We have many years of experience in this sector. Timago products reach a wide range of
users in Poland and throughout Europe through our distributors (medical retailers).
Timago’s company culture promotes openness to your needs. Our goal is to promote safe
and correct use of our products for treatment and rehabilitation in order to improve comfort
and quality of life.
We invite you to access our website for more information: timago.com.

1. Introduction
Prior to use of our products you should inspect the equipment for any defects which may
have occurred during transport. If this happens, please contact your retailer.
Then, please read this instruction which includes important information for the user.
Please contact us if you have any questions concerning the use of the equipment. Our
advisors will provide you with any information you require on an ongoing basis.
Please note that if you have questions other than those concerning the use of our products,
you should contact your doctor, nurse or physical therapist.
2. Characteristics
2.1 TKS2012-A
Anti-decubitus bubble mattress with pump is a set which includes a pressure alternating
mattress and a compressor (air pump). The mattress is made of durable PVC in the form of
bubble chambers which are alternately inflated in cycles by the compressor (air pump). By
changing support points of the person lying on the bed, this set minimizes pressure on the
parts of the body which are the most at risk from bedsores and allows avoiding or reducing
skin damage. The PVC used in the mattress is made of a non-toxic and hypoallergenic
material.
The set includes:
•Alternating pressure pump TKS2012
•Air hoses
•Bubble mattress
2.2 TKS2012-B1
Anti-decubitus strip mattress with pump is a set which includes a pressure alternating
mattress and a compressor (air pump). The mattress is made of durable PVC with nylon in
the form of transverse chambers which are alternately inflated in cycles by the compressor
(air pump). By changing support points of the person lying on the bed, this set minimizes
pressure on the parts of the body which are the most at risk from bedsores and allows
avoiding or reducing skin damage. The PVC used in the mattress is made of a non-toxic and
hypoallergenic material. The mattress is equipped with CPR function.
The set includes:

•Alternating pressure pump TKS2012
•Strip mattress
•CPR function
•Cover
•Spare fuse
•Air hoses
3. Application
Anti-decubitus mattresses with pump are equipment designed for people at risk of bedsores.
Anti-decubitus mattress helps people who are bedridden for an extended period of time,
who suffer from blood flow disorders in peripheral circulatory system, as well as when signs
of subcutaneous or open skin damage caused by long-term pressure occur. The mattress is
used to prevent bedsores and treat stage I (according to NPUAP / EPUAP) bedsores. The
mattress works by cyclically changing support points of the person lying on the bed,
minimizing pressure on the parts of the body which have the greatest risk of bedsores. This
improves circulation of the tissues of the body parts which remain in contact with the bed
surface for the longest period. It should be noted that the mattress operating principle
described above cannot eliminate all causes of skin lesions; however, it can significantly limit
their development. Contraindications for use of alternating pressure mattresses are
determined by a physician based on a physical examination and medical history. As a general
guideline, the mattress is contraindicated if alternating changes of support points cause pain
and an exacerbation of the patient’s condition.
4. Assembly and general recommendations for use
Note! Follow the information contained in this manual while assembly and adjustment.
Users with reduced mobility may need help from a third person who has appropriate skills.
Note! Do not use the mattress before it is fully pumped.
STEP 1
Place the mattress on the bed directly on top of the regular mattress. The flaps at each end
of the pressure relief mattress should be tucked under the regular mattress to limit
movement of one mattress relative to the other. Next, cover the mattress with the cover

included in the set. It is recommended to secure the mattress with a hygienic vapour-
permeable mattress pad or cotton sheet in order to prevent it from being soiled.
STEP 2
The hook of the pump should be opened to the desired width and hung on the bed frame.
STEP 3
The pump and the mattress should be connected with air hoses so that they are not kinked
or trapped under the mattress. Make sure that the hoses are properly fastened and do not
come out from the ports.
STEP 4
Plug in the pump using the power cord, taking extra care while doing this.
STEP 5
To start the pump, press the ON button on the control panel. The pressure relief mattress
will then start to inflate.
STEP 6
Set the pressure dial at the maximum value. The preparation time (the first inflation) prior to
use takes 24 minutes (two full cycles).
Note! You can only use the mattress after 24 minutes from starting the mattress
STEP 7
Following complete inflation, set appropriate pressure value with the use of adjustment
knob. Then, the mattress is ready to use.
Note! The compressor works by pumping the air alternately into the chambers of the
mattress and for this purpose it must be constantly on. The OFF switch on the control panel

is only used to turn off the compressor when nobody is using the mattress. Reusing the
mattress requires a start-up procedure (see STEP 6 and 7).
5. Technical data
•Mattress dimensions: 199 × 88 × 8 cm (TKS2012-A) / 198 x 82 x 11 cm (TKS2012-B1)
•Maximum capacity: 110 kg (TKS2012-A) / 150 kg (TKS2012-B1)
•Mattress weight: 2,35 kg (TKS2012-A) / 3,7 kg (TKS2012-B1)
•Compressor weight: 1,4 kg (TKS2012-A) / 1,4 kg (TKS2012-B1)
•Cycle duration: 12 min
•Compressor: TKS2012
•Pressure range: 70-120 mmHg
•Flow: 5-6 l/min
•Power supply: 220-230V AC 50Hz
•Fuse: F500mA, 250V
•Power intake 7W
•Ambient condition
Temperature: +10oC up to +40 oC
Humidity: 30% - 90%
•Mattress: made of durable PVC with nylon in the form of transverse chambers
(TKS2012-B1)
•Mattress: made of durable PVC in the form of bubble chambers (TKS2012-A)
6. Notes and recommendations
Note! Before using the mattress consult your doctor in order to determine any
contraindications for use. The mattress should not be used without consulting a doctor
particularly in case of:
- application of a cervical traction,
- multilevel instability of a given segment of the spine.
Note! In case of patient with pacemaker, the pump should be placed as far from chest as
possible.
Note! One mattress should be used with one patient.
Note! Do not exceed maximum capacity.