tissino Giorgio Series User manual

Installation
Manual
Giorgio Wall Panels
TRGIM 1118
Giorgio Series Wall Panels

Installation Guide
Giorgio Wall Panels
Tools
Required
Before starting, make sure the wall are smooth
and dry. Wall board packaging can be used to
protect the shower tray during installation.
Apply MS Polymer adhesive to the walls,
followed by adhesive tape on the perimeter of
the wall board position.
Place the panel on top of the tray in line with
the adhesive tape, slowly lift the panel and
press rmly against the wall.
Finally apply MS Polymer in the joint between
the board and the wall. Remove any excess
putty and cut the remains of adhesive tape.
Important
Please wait for 24 hours for the MS Polymer adhesive to set before xing shower screens.
Cleaning Instructions
Use soap with a sponge or a non-abrasive cloth and rinse with hot water.
Warranty Exclusions
• Damages caused by misuse of the product
• Failure to follow these instructions resulting in bad installation
• The use of materials not suitable for cleaning
1.
3.
2.
4.