TMG TMG-MS0408 User manual

TOLL FREE: 1-877-761-2819www.tmgindustrial.com
PRODUCT MANUAL
TMG-MS0408
2240mm
960mm
4 x 8 METAL PENT SHED
'
'
• Please read and understand the product manual completely before assembly
• Check against the parts list to make sure all parts are received
• Wear proper safety goggles or other protective gears while in assembly
• Do not return the product to dealer. They are not equipped to handle your requests.
WARNING This structure is intended for temporary outdoor storage use only. It is not designed to
withstand heavy snow and wind loads and does not come with engineering drawings.
To ensure suitable for your specific weather needs, it is your responsibility to verify
their appropriateness for your intended use and local weather conditions, especially in
areas prone to severe weather.
Missing parts or have questions on assembly?
Please call: 1-877-761-2819 or email: [email protected]

BEFORE YOU START
Owner's Manual
Prior to installation, it is important that you contact your local government authority to
determine if building approval is required. Study and understand this owner's manual.
Important information and helpful tips will make your construction easier and more
enjoyable.
Assembly instructions
Instructions are supplied in this manual and contain all appropriate information for your
building model. Review all instructions before you begin. During assembly, follow the
step sequence carefully for correct results .Please be aware: this unit takes two people
about one full day to complete.
Parts
Check to be sure that you have all the necessary parts for the building.
Separate contents of the carton by the part number while reviewing parts list.
Familiarize yourself with the hardware and fasteners for easier use during
construction. These are packaged within the carton. Note that extra fasteners have been
supplied for your convenience.
TOOLS MAY REQUIRED
Use heavy duty gloves when handling steel sheets and flashing
PLAN AHEAD
Watch the weather:
Please be sure the day you select for installation is dry and calm.
DO NOT attempt to assemble your shed in windy weather
because of risk of damage to panels, or personal injury. Be careful
of wet or muddy ground.
Teamwork:
Whenever possible, two or more people should work together to
assemble the building. One person can position parts or panels
while the other is able to handle the fasteners and the tools.
It requires two people a full
day to complete installation
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
2/19

PLAN AHEAD
Site Selection
lAvoid overhanging trees as much as possible as leaves will make regular cleaning
necessary and broken branches are a potential hazard.
lSmall trees,bushes or fences nearby can be helpful,acting as a wind break.
Site Preparation
The site must be prepared so that the base of the shed is level all round and checking
with a spirit level is required.
The base can be constructed by treated timber or concrete,in order to stop the moisture
getting into the shed.The shed is not designed to be built onto lawn directly.Also the
ground will get muddy during rainy days.
If a concrete pad is made,it is important that this slopes towards the edges to prevent
water ingress.
Time must be allowed for any concrete or cement to dry before building the shed on top.
Bases can also be constructed from bricks,blocks,or mounted on a concrete pad.
The bricks or blocks should be cemented onto firm and level concrete footings and the
greenhouse frame drilled and screwed to the base.
IMPORTANT NOTES:
lFind someone to help you:it is much easier with someone to hold parts,pass tools
ect.Also some steps require two people to lift structures together.This is not very
heavy work so would suit most able-bodied people.
lAllow plenty of time:rushing often causes errors and the re-doing of incorrect
assemblies.If you have never built a shed before,it can take most of a day to carefully
complete the construction.
lHave the right tools to hand.
lSafety clothing as recommended in the 'Tools' section.
lIdeally lat out the parts and check that all are present before commencing
construction.Lay on cloths or plastic sheets if there is any risk of scratching the parts.
lTighten all nuts carefully,being sure not to miss any.Check the frame is square and
using a spirit level to check that it is upright.
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
3/19

PART
NO. Qty.
Q
PART
NO. Qty.
1
1
1
1R
2L
1800mm
944mm
426mm
1
1
H
1L
1800mm
944mm
1
2R 426mm
1
10L 1762mm
2
10R 391mm
1
3944mm
35
36
1510mm
13 1
1510mm
14 1
1704mm
15 1
1731mm
1520mm
1721mm
1711mm
4L 1
4R 1
5L 1
5R 1
21L
21R
1
1
71
61
1736mm
6
1
1
2
1
1
3
3
893mm
893mm
30 799mm
31
32
1634mm
33
40
41
1475mm
1475mm
1634mm
1634mm
2
17 1111mm
2
20 120mm
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
4/19

P1 6
1510mm
45
400
40
F3
F1
F2
PART
NO. Qty.
PART
NO. Qty.
S3
S2
B6
J1 8
S4 2
1
18R
1
19L
P2 1
1704mm
P3 2
1510mm
D1 1
1474mm
D2 2
1633mm
P5 4
1110mm
P6 1
1110mm
3
GF
9
4
GC
120
240
1
18L 1210mm
1
19R
1210mm
1210mm
1210mm
6
6
29
29-1
GB 2
H2 2
2
GJ
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
5/19

1L
1R
J1
Q
H
J1
J1
J1
3
2R
2L
S4
J1
S4
P1
P1
P1
P1
P3
13
14
15
GC
10R
10L
21R
21L
GF
GF
GF
7
4R
B6
B6
B6
B6
D1
P2
10R
6
4L
5R
5L
36
35 35
36
31
32
31
30
30
30
30
33
B6
B6
29
29-1
29-1
29
H2
H2
29
29-1
29-1
29
29-1
29
29
29-1
41
40
30
30
36
35
B6
P3
P1
P1
D2
D2
GC
GC
GC
P5
P5
P5
P5
P6
17
17
18L
18R
19L
19R
20
20
GB
GB
GJ
GJ
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
6/19

J1
1L
1R
J1
Q
H
J1
J1
J1
3
2R
2L
S4
J1
S4
PART
NO. Qty.
Q 1
1
1
1R
2L
1
1
H
1L
1
2R
1
3
J1 8
S4 2
S4
1、Wen diagonal measurements are
equal,the frame is square.
2、The Floor Frame must be
BOTH square AND level or the
holes will not line up properly.
F1 F1
F1
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
7/19

S3
PART
NO. Qty.
5L 1
P1 2
F2
S3
P1
P1 5L
Q
F1
S3
PART
NO. Qty.
13 1
P3 1
PART
NO. Qty.
14 1
15 1
P1 2
F1
S3
P1
P1
14
15
F2
S3
F1
F1
13
F2
S3
P3
P1
P1
P1 2
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
8/19

PART
NO. Qty.
P3 1
4R 1
F1
S3
F2
S3
P3
4R
F1
F1
S3
PART
NO. Qty.
4L 1
P2 1
5R 1
5R
4L
F2
F1
F1
P2
21R
21L
GF
GF
PART
NO. Qty.
21L 1
21R 1
GF 2
F2
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
9/19

F1
S3
PART
NO. Qty.
GF
7
71
GF 1
21L
21R
F2
7
F1
S3
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
10/19

PART
NO. Qty.
1
10L
1
10R
PART
NO. Qty.
1
10R
61
10R
PART
NO. Qty.
P5 1
P6 1
S3
F1
P5
P6
2
GJ
F1
S3
10R
10L
10L
GJ
6
10R
F1
S3
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
11/19

17 17
PART
NO. Qty.
P5 3
S3
F1
P5
P5
P5
P5 P6
P5
P5 P5
PART
NO. Qty.
2
17
S3
F2
S3
F2
17
17
PART
NO. Qty.
1
18R
1
19L
1
18L
1
19R
2
20
18L
18R
19R
19L
20
20
20
S3
F1
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
12/19

PART
NO. Qty.
GC 4
GC
GC
GC
GC
19R
19L
18L
18R S3
F1 F1
18R&18L
19R&19L
PART
NO. Qty.
6
29
6
29-1
6
30
29
29-1
30
x6
F1
PART
NO. Qty.
1
31
1
32
D2 1
D2
31 32
S3
F2
D2
31
32
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
13/19

S3
F1
S3 F2
32
PART
NO. Qty.
1
35
1
36
3
B6
F3
31
F1
35
36
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
14/19

H2
H2
F3
PART
NO. Qty.
H2 2
PART
NO. Qty.
1
31
1
33
D2 1
D2
31 33
S3
F2
D2
31
33
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
15/19

PART
NO. Qty.
1
31
1
33
D2 1
D2
31 33
S3
F2
S3
F1
S3 F2
33
PART
NO. Qty.
1
35
1
36
3
B6
F3
31
F1
35
36
D2
31
33
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
16/19

F3
GB
PART
NO. Qty.
GB 1
PART
NO. Qty.
1
40
1
41
D1 1
D1
40 41
S3
F2
D1
40
41
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
17/19

S3
F1
S3 F2
41
PART
NO. Qty.
1
35
1
36
3
B6
F3
40
F1
35
36
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
18/19

PART
NO. Qty.
GB 1
F3
GB
/19
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
19
WARRANTY INFORMATION: Please refer to our website for detailed warranty conditions and coverage.
For the most up-to-date and comprehensive warranty information, visit www.tmgindustrial.com