TMG TMG-MS0506 User manual

TOLL FREE: 1-877-761-2819www.tmgindustrial.com
PRODUCT MANUAL
TMG-MS0506
PRO-SERIES METAL SHED
1320mm
1720mm
5x 6 APEX ROOF
''
• Please read and understand the product manual completely before assembly
• Check against the parts list to make sure all parts are received
• Wear proper safety goggles or other protective gears while in assembly
• Do not return the product to dealer. They are not equipped to handle your requests.
WARNING This structure is intended for temporary outdoor storage use only. It is not designed to
withstand heavy snow and wind loads and does not come with engineering drawings.
To ensure suitable for your specific weather needs, it is your responsibility to verify
their appropriateness for your intended use and local weather conditions, especially in
areas prone to severe weather.
Missing parts or have questions on assembly?
Please call: 1-877-761-2819 or email: [email protected]

BEFORE YOU START
Owner's Manual
Prior to installation, it is important that you contact your local government authority to
determine if building approval is required. Study and understand this owner's manual.
Important information and helpful tips will make your construction easier and more
enjoyable.
Assembly instructions
Instructions are supplied in this manual and contain all appropriate information for your
building model. Review all instructions before you begin. During assembly, follow the
step sequence carefully for correct results .Please be aware: this unit takes two people
about one full day to complete .
Parts
Check to be sure that you have all the necessary parts for the building.
Separate contents of the carton by the part number while reviewing parts list.
Familiarize yourself with the hardware and fasteners for easier use during
construction. These are packaged within the carton. Note that extra fasteners have been
supplied for your convenience.
TOOLS MAY REQUIRED
Use heavy duty gloves when handling steel sheets and flashing
PLAN AHEAD
Watch the weather:
Please be sure the day you select for installation is dry and calm.
DO NOT attempt to assemble your shed in windy weather
because of risk of damage to panels, or personal injury. Be careful
of wet or muddy ground.
Teamwork:
Whenever possible, two or more people should work together to
assemble the building. One person can position parts or panels
while the other is able to handle the fasteners and the tools.
3M
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
2/21

PLAN AHEAD
Site Selection
Avoid overhanging trees as much as possible as leaves will make regular cleaning
necessary and broken branches are a potential hazard.
Small trees,bushes or fences nearby can be helpful,acting as a wind break.
Site Preparation
The site must be prepared so that the base of the shed is level all round and checking
with a spirit level is required.
The base can be constructed by treated timber or concrete,in order to stop the mo i sture
getting into the shed. The shed is not designed to be built onto lawn directly . Also the
ground will get muddy during rainy days.
If a concrete pad is made,it is important that this slopes towards the edges to prevent
water ingress.
Time must be allowed for any concrete or cement to dry before building the shed on top.
Bases can also be constructed from bricks,blocks,or mounted on a concrete pad.
The bricks or blocks should be cemented onto firm and level concrete footings and the
greenhouse frame drilled and screwed to the base.
IMPORTANT NOTES:
Find someone to help you:it is much easier with someone to hold parts,pass tools
ect.Also some steps require two people to lift structures together.This is not very
heavy work so would suit most able-bodied people.
Allow plenty of time:rushing often causes errors and the re-doing of incorrect
assemblies.If you have never built a shed before,it can take most of a day to carefully
complete the construction.
Have the right tools to hand.
Safety clothing as recommended in the 'Tools' section.
Ideally lat out the parts and check that all are present before commencing
construction.Lay on cloths or plastic sheets if there is any risk of scratching the parts.
Tighten all nuts carefully,being sure not to miss any.Check the frame is square and
using a spirit level to check that it is upright.
Care must be taken when handling various pieces of
your building since many contain sharp edges. Please
wear work gloves, eye protection and long sleeves
when assembling or performing any maintenance on
your building.
sharp edges
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
3/21

PART
NO.
Qty.
1
PART
NO.
Qty.
2
1260mm
22
32
42
51
61
71
81
20 2
12 2
13 2
14 2
16 4
21 2
1260mm
1660mm
1660mm
722mm
722mm
1750mm
1750mm
1718mm
1784mm
703mm
703mm
1750mm
P1
6
1750mm
D2
1
1712mm
GS
4
L1 8
GB
B6
2
1
F3
F1
F2
S3
S2
B3
210
34
14
60
72
1
K1
4
P3
6
1750mm
P7
4
643mm
P9
4
643mm
18 1
19 1
GE
2
1788mm
1788mm
S4
80
GC
4
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
4/21

20
18
21
21
GS
GS
GS
GS
GE
GE
13
13
14
14
12
12
19
P7
P7
P7
P7
P9
P9
20
GB
D2
B6
B6
16
16
16
16
L1
L1
L1
L1
L1
L1
L1
L1
5
6
7
8
1
1
2
2
4
4
3
3
P1
P1
P1
P1
P1
P1
P3
P3
P3
P3
P3
P3
P9
P9
GC
GC
GC
GC
B3
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
5/21

21
34
56
ASSEMBLY OVERVIEW
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
6/21

8
7
ASSEMBLY OVERVIEW
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
7/21

Step 1: Side Walls (2X)
3
PART
NO.
Qty.
2
2
4
4
P1
F1
12
S3
18
F2
6
4
P3
4
3
P1
4
3
P1
P2
4
P2
3
F2
S3 P1
P1
F1
S3
P1
P1
P3
P3
P1
P1
P3 P3
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
8/21

P1
P1
1
2
F2
S3 P1
P1
F1
S3
P1
P1
3
4
3
P1
P1
4
Step 2: Rear Wall
1
PART
NO.
Qty.
1
1
2
2
P1
F1
2
S3
3
F2
1
P1
P1
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
9/21

Step 3: Front Wall
PART
NO.
Qty.
2
P3
F1
4
S3
6
F2
2
1
5
1
6
1
7
1
8
5
6
8
P3
P3
87
F2
S3
F2
S3
7
P3
P3
8
6
F1
S3
6
7
7
8
5
5
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
10/21

Step 3: Front Wall
1
PART
NO.
Qty.
1
1
2
F1
4
S3
4
5
8
7
2
1
P3
2
P3
P3
1
P3
P3
P3
1
2
F1
S3
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
11/21

Step 4: Wall Assembly
L1
PART
NO.
Qty.
8
F1
16
1
3
3
1
Above
below
L1
F1
L1
F1
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
12/21

Step 4: Wall Assembly
PART
NO.
Qty.
F1
16
16 4
F2
8
S3
24
F2
S3
Above
below
F1
S3
16
16
16
16
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
13/21

Step 5: Gable & Beam Assy
21
PART
NO.
Qty.
2
F1
41
20 2
F2
4
20
20
21
21
F1
F2
F2
20
21
F1
F1
F1
6
78
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
14/21

18
14
13
13
14
F1
S4
F1
13 14
Step 5: Gable & Beam Assy
PART
NO.
Qty.
F1
20
13 2
14 2
18 1
S4
4
F1
S4
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
15/21

Step 6: Roof f installation
PART
NO.
Qty.
F1
74
P7
66
4
S4
P9
4
12 2
GS
4
GE
2
19 1
14
P9 P7 P7
13
P7
P7
F1
S4
P7
P7
P9
P7
P7
P9
12
12
GS
GS
F2
F2
8
12
19
GE
GE
F1
S4
19
GE
P9
P9
P9
14
13
14
13
GC
4
GC
GC
GC
GC
F1
S4
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
16/21

PART
NO.
Qty.
D2
Step 7: Door Assembly
1
F3
6
F3
B6
B6
2
F3
B6
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
17/21

Step 7: Door Assembly
PART
NO.
Qty.
GB
1
GB
Assembly the lock as shown
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
18/21

PART
NO.
Qty.
B3
1
B3
First pass B3 to the side
Pass B3 on the other side
Step 7: Door Assembly
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
19/21

PART
NO.
Qty.
Step 8: Installing the door and lock
F3
6
2
F3
B6
F3
K1
K1
4
www.tmgindustrial.com TOLL FREE: 1-877-761-2819
20/21