TMG TMG-MSC20-RD12 User manual

www.tmgindustrial.com 0/12 TOLL FREE: 1-877-761-2819

www.tmgindustrial.com 1/12 TOLL FREE: 1-877-761-2819
MAIN SPECIFICATIONS :
Overall assembled size : W6 x H3.8 (m) / 19.7 x 12.5 (ft)
Roll-up door : W2.55 x H2.36 (m) / 8.4 x 7.7(ft)
Back door: W0.9 x H2 (m) / 3x 6.6(ft)
PRIOR TO ASSEMBLY
Please read the instructions carefully before installation. It is very important to follow your local safety regulations and
industry standards during installation. Regulations may include but are not limited to:
Safety helmets, protective eyewear, and clothing
Safety harnesses for all elevated workers
Proper ladder, cage, and safety operation
Check all components and parts before installation. All parts are marked with a part number, please refer to the parts list
to make sure you have all parts.
Choose a day with low or no wind to install, assembly is hard in heavy wind. Do not make any alterations to the structure.
Do not hang any weights on the frame during installation, including parts. We are not responsible for any damages or
injuries caused by inappropriate installation, unauthorized modifications or extreme weather.
This building is not intended for human occupancy.
Read the following item list carefully and count the number of items to ensure that all parts are included prior to setup.

www.tmgindustrial.com 2/12 TOLL FREE: 1-877-761-2819
TMG-MSC20-RD12 PART LIST
PARTS
CODE
GRAPHICAL
DESCRIPTION
LENGTH
QTY
4A
Short casing
L198mm
4
4B
Lower vertical tube
L2360mm
6
4C
Back door left tube
L2360mm
1
4D
Back door right tube
L2360mm
1
5
Baseplate
W150 x L200mm
8
7B
Metal sheet
W552 x L1760mm
2
7C
Metal sheet
W870 x L1760mm
2
7L
Metal sheet
W320 x L1190mm
2
7R
Metal sheet
W320 x L1190mm
2
8B
Metal sheet
W335 x L870mm
9
8C
Metal sheet
W870 x L1350mm
12
8D
Metal sheet
W410 x L1000mm
1
8L
Metal sheet
W870 x L2190mm
2
8R
Metal sheet
W870 x L2190mm
2

www.tmgindustrial.com 3/12 TOLL FREE: 1-877-761-2819
9A
Edge protector
L1800mm
14
9B
Edge protector
L2360mm
4
9C
Edge protector
(h type)
L2500mm
2
9D
Edge protector
L2020mm
2
10
Edge buckle
L200mm
12
12A
Front cross tube
L1973mm
2
12B
Rear cross tube
L1973mm
2
12C
Upper vertical tube
L1065mm
4
13A
Front cross tube
L1973mm
1
13B
Rear cross tube
L1973mm
1
13C
Door frame cross pull tube
L920mm
1
14B
Back door
W925 x L2005mm
1
14C
Limit block
W30 x L40mm
4
14D
Hex bolt
M6 x 20mm
4
14L
Front vertical door rail
(left side)
L2400mm
2

www.tmgindustrial.com 4/12 TOLL FREE: 1-877-761-2819
14R
Front vertical door rail
(right side)
L2400mm
2
15
Expansion bolt
φ16 x 150mm
16
15A
Roll-up door
W400 x L2800mm
2
15L
Right bracket assembly
W250 x L333mm
2
15R
Left bracket assembly
W250 x L333mm
2
17
Hex bolt
M10 x 70mm
62
18
Self tapping screw
#12 x 25mm
200
18A
Tapping screw
#12 x 25mm
24
22
Sleeve
8mm
2
24
Hole drill
φ22mm
1

www.tmgindustrial.com 5/12 TOLL FREE: 1-877-761-2819
INSTALLATION STEPS
STEP 1 : FRONT TRUSS INSTALLATION
NO.
PART
QTY
4A
2
4B
4
5
4
12A
2
12C
2
13A
1
NO.
PART
QTY
15
8
15L
2
15R
2
17
30

www.tmgindustrial.com 6/12 TOLL FREE: 1-877-761-2819
STEP 2 : REAR TRUSS INSTALLATION
NO.
PART
QTY
4A
2
4B
2
4C
1
4D
1
5
4
12B
2
NO.
PART
QTY
12C
2
13B
1
13C
1
15
8
17
32

www.tmgindustrial.com 7/12 TOLL FREE: 1-877-761-2819
STEP 3 : INSTALL FRONT WALL PANELS
1. Wall panel placement order.
2. When installing the wall panel, install it from top to bottom.

www.tmgindustrial.com 8/12 TOLL FREE: 1-877-761-2819
NO.
PART
QTY
7B
1
7C
1
7L
1
7R
1
8B
9
8L
1
NO.
PART
QTY
8R
1
9A
7
9B
4
9C
2
10
6
18
100
STEP 4 : INSTALL REAR WALL PANELS
1. Wall panel placement order.

www.tmgindustrial.com 9/12 TOLL FREE: 1-877-761-2819
2. When installing the wall panel, install it from top to bottom.
NO.
PART
QTY
7B
1
7C
1
7L
1
7R
1
8C
12
8D
1
NO.
PART
NO.
8L
1
8R
1
9A
7
9D
2
10
6
18
100

www.tmgindustrial.com 10/12 TOLL FREE: 1-877-761-2819
STEP 5 : FRONT DOOR INSTALLATION
1. Install guide rail and roll-up door.
2. After adjusting the level of the rolling door and moving up and down flexibly, install the limit block (#14C).
3. The lock pin shaft has a hole in the proper position of the guide rail.
NO.
PART
QTY
14C
4
14D
4
14L
2
14R
2
NO.
PART
QTY
15A
2
18A
16
24
1

www.tmgindustrial.com 11/12 TOLL FREE: 1-877-761-2819
STEP 6 : REAR DOOR INSTALLATION
NO.
PART
QTY
14B
1
18A
8

www.tmgindustrial.com 12/12 TOLL FREE: 1-877-761-2819
AFTER THE INSTALLATION
Walk around and inspect the shelter periodically to make sure all components are still firmly secured and the whole
shelter is well supported. Check all bolts and nuts as well as all connection points to make sure they are all in good
position.
Snow accumulating on the fabric cover must be removed as soon as possible. If snow becomes solid ice on the cover, it
will increase the weight on the roof and may collapse the shelter or reduce the life span.
We strongly recommend you remove any snow from the roof immediately. Do not leave any snow load on the roof
overnight. Keep 3 feet of clearance on all sides at all times. Do not allow snow to accumulate and pile up on the sides of
the building. Otherwise the pressure from the sides will push inwards and could lead to a collapse.