TMI Products VD31 User manual

English
Hour hand
Minute hand
Second hand
24 hour hand
Date window
Crown at :
1st click
2nd click
Dual hour hand
Crown at :
Normal position
2nd click (VD31)
1st click (VD32)
* After setting or changing the battery, before setting the time, check if the dual hour hand is at the
"0" (24 o'clock) position.
* If the dual hour hand is not at the "0" position, reset it following the procedure shown below :
1) Pull out the crown to second click (VD31) / first click (VD32).
2) Keep the buttons A & B pressed at the same time for more than 2 seconds, then release the buttons.
* Dual hour hand moves and returns to where it was.
3) Press button A or B to reset the dual hour hand to "0" position.
* Button A : hand moves counter-clockwise
Button B : hand moves clockwise
* The dual hour hand moves quickly if the respective buttons are kept pressed.
4) Push the crown back in the normal position.
ADJUSTING DUAL TIME HANDS POSITION
Local Time
Time Indication
Center hour hand
Center minute hand
Center second hand
3H subdial hand
O X
Time setting
(by turning CROWN)Date setting Time setting
Time setting X
Dual Time
Time Indication
9H subdial hand (24 hr)
Time setting
(by pushing BUTTONS)Button A : -1 hour / push
Button B : +1 hour / push
Button A : -10 minute / push
Button B : +10 minute / push
Operation Manual
VD31 / VD32
DISPLAY AND CROWN/ BUTTON OPERATION
VD31
VD32
[ VD31 ]
[ VD32 ]
hour hand
second hand
minute hand
24 hour hand
Button A
Button B
Crown at normal
position
1st click
dual hour
hand (24 hr)
hour hand
second hand
minute hand
24 hour hand
Button A
Button B
Crown at normal
position
1st click
2nd click
dual hour
hand (24 hr)
date window
VD31
VD31

English
1) Pull out the crown to second click (VD31) / first click (VD32) when the second hand is at the 12 o'clock
position.
2) Turn the crown to set the hour and minute hands. (make sure 24 hour hand is set correctly).
3) Push the crown back in the normal position in accordance with a time signal.
Note :
* The 24 hour hand moves correspondingly with the hour hand.
* The moment the date changes is midnight. When setting the hour hand, make sure that AM/PM is
correctly set by using the 24 hour hand as an AM/PM indicator.
* When moving to a country or area in a different time zone, adjust the dual hour hand to that
country / area :
[ Quick set the dual time ]
1) Crown at normal position.
2) Adjust the time by pressing the button A or B.
Button A : - 1 hour / push
Button B : +1 hour / push
[ Precise adjustment of the the dual time ]
1) Pull out the crown to second click (VD31) / first click (VD32) when the second hand is at the
12 o'clock position.
2) Adjust the time by pressing the button A or B.
Button A : -10 minute / push
Button B : +10 minute / push
3) Push the crown back in the normal position in accordance with a time signal.
* Before setting the date, be sure to set the time.
1) Pull out the crown to the first click.
2) Turn the crown clockwise until the desired date appears.
3) Push the crown back in the normal position.
Note :
* Do not set the date during any time between 9:00 P.M. and 1:00 A.M. Otherwise, the date may not
change properly. If it is necessary to set the date during that time period, first change the time to any
time outside it, set the date and then reset the correct time.
DUAL TIME SETTING
DATE SETTING (VD31 only)
Operation Manual
VD31 / VD32
LOCAL TIME SETTING
when the second hand is at the 12 o’clock position.
when the second hand is at the 12 o’clock position.