Tokai R Series User manual

Hand-Type Thermal Deposition Machine
（Standard type）
Operation Manual
Tokai Metal Industry Co., Ltd.
Tokai Bussan Co., Ltd.

Parts Name
Handle
Soldering iron
Punch
○
Drill Stand
○Temperature controller

Preparration for insert
○Temperature controller
Insert the soldering iron with built-in
temperature controller into the outlet.
※3 cores ⇄ 2 cores conversion plug may be
required.
Set temperature
Since set temp varies with the resin characteristics, determine the set temp by testing.
250℃is the target temperature.
How to change set temperature
Turn on the power. To change the set temperature, press the function key ( key) .
Set the temperature with the setting button (△ ▽ key).
※ The lower row (green) is the set temperature, and the upper row (red) is the actual temperature.
○Drill Stand How to Adjust the Stroke
Actual
Power switch
Setting Button
Function key
Preset Temperature
Bolt
Scale
Head
Scale Enlargement
Ring
① Unfasten the bolt and put
down the punch until the
position of inserting.
② While the punch is
getting down, fasten the
bolt, and fix the inserting
stroke.
Indicating 40mm going
down.
★In# order# to# exchange# the# punch# part,# please# do# it#
after#its#complete#cool#down.#
Thread#id#reverse#torision.#(Thread#comes#loose#by#
clockwise#rotation)#
Stop bar
Click here for details

Press In
作業 ◇
① Prepare Hand-Type Thermal Deposition Machine,
and warm it after the setting of punch temperature.
②Place the insert nut at the opponent resin.
③Start press in by lowering the handle.
④Press in till the predetermined position, and raise the handle
slowly.
⑤Complete.