Toner OMC-750E User manual

Handheld Video Microscope
OMC-750E
Handheld Optical Fiber Microscope
Instruction Manual
www.tonercable.com

1
www.tonercable.com
OMC-750E
Handheld Optical Fiber Microscope
Instruction Manual
SAFETY SUMMARY
Personnel concerned with the operation of this instrument
must thoroughly understand and follow the safety guidelines
below. The manufacturer assumes no liability for the
operator’s failure to observe these guidelines.
Warning –Laser Radiation Hazard
Operators must always remember that laser radiation at or
above 1mW has the potential to cause serious damage to the
human eye.
Never look into the open end of an optical fiber where high
level of laser radiation may be present.
Warning - Explosive Atmospheres
To avoid explosion, do not operate this instrument in the
presence of flammable gases or fumes.

2
www.tonercable.com
OMC-750E
Handheld Optical Fiber Microscope
Instruction Manual
Caution
Operators should not operate this instrument with any of its
covers removed, nor should they allow anyone else to do so.
Do not attempt to carry out any unauthorized service to this
instrument. Always return the instrument to an authorized
service centre for repair to ensure that safety features are
maintained.
www.tonercable.com
OMC-750E
Handheld Optical Fiber Microscope
Instruction Manual

3
www.tonercable.com
OMC-750E
Handheld Optical Fiber Microscope
Instruction Manual
CONTENTS
Page
Overview 4
Features 5
Description 6
Operation 9
Specifications 11

4
www.tonercable.com
OMC-750E
Handheld Optical Fiber Microscope
Instruction Manual
Overview
Reliability and performance of a fiber optic link largely
depends on the quality of interconnects. Contaminated
connectors can cause the mating surfaces to separate leading
to high insertion loss and back-reflection. Furthermore, some
dirt particles can even scratch or dig into the glass causing
permanent damage to the end-face of the connector.
Therefore, inspection of fiber optic connectors should be
performed whenever a connection is to be made.
The OMC-750E is a handheld microscope specifically
designed for fiber optic connector end face inspection.

5
www.tonercable.com
OMC-750E
Handheld Optical Fiber Microscope
Instruction Manual
Features
FC/SC/ST/E2000/LC/MU/MPO compatible
3.5-inch TFT display
Up to 250x overall magnification
4x digital zoom
SD card storage up to 8G
Snapshot, video recording and playback
PC plug-and-play

6
www.tonercable.com
OMC-750E
Handheld Optical Fiber Microscope
Instruction Manual
Description
1. Main Unit
2. Probe

7
www.tonercable.com
OMC-750E
Handheld Optical Fiber Microscope
Instruction Manual
Operation
1. Main Unit
1.1 Power on/off
Press the Power Button briefly to turn the unit ON or OFF.
1.2 Screen capture and video recording
Press the Snapshot Button for instant screen capture or press
the Mode Button and follow the screen menu to record and
playback.

8
www.tonercable.com
OMC-750E
Handheld Optical Fiber Microscope
Instruction Manual
1.3 Battery charging
Charging of the internal battery will automatically start as
soon as the charger is plugged into the main unit. The
charging indicator will light until charging is complete.
2. Probe

9
www.tonercable.com
OMC-750E
Handheld Optical Fiber Microscope
Instruction Manual
2.1 Focus adjustment
Gently rotate the focus adjustment knob to bring the image
into focus. Do not overturn the knob or damage to the optical
system may occur.
2.2 Adaptor bits
Always install adaptor bits gently and co-axially to avoid
damage to the precision mechanism.
2.3 Connection with the main unit
When connecting, insert the end plug to the main unit’s
probe socket until a light click is heard. When disconnecting,
simply grab and pull the outer ring of the plug.

10
www.tonercable.com
OMC-750E
Handheld Optical Fiber Microscope
Instruction Manual
Specifications
Mainframe
Display
3.5”TFT-LCD, 320 x 240 pixels
Dimensions
170mm x 100mm x 30mm
Weigh(including
battery)
261g
Power Supply
Replaceable battery or universal input
5V DC adapter
Battery
Rechargeable Li-Ion, 3.7V / 1450mAh
Battery life
> 3 hours (continuous)
Charger/AC adapter
US, EU, UK and Australian versions
available
Image / Video Storage
8GB SD card
Operating
Temperature
-20°C to 50°C
Storage Temperature
-30°C to 70°C
Inspection Probe
Magnification
400X (9”monitor); 250x (3.5”monitor)
Detection Limit
0.5μm
Focus Control
Manual , in-probe
Principle
Bright field reflected light microscopy
Dimensions
180mm x 40mm x 40mm
Weight
153g

11
www.tonercable.com
OMC-750E
Handheld Optical Fiber Microscope
Instruction Manual
Standard Accessories
Inspection Probe
x 1
Mainframe
x 1
AC power adapter/battery charger
x 1
Rechargeable battery pack
x 1
2.5mm tip for PC male connectors
x 1
1.25mm tip for PC male connectors
x 1
Tip for SC / FC PC female connectors
x 1
Tip for LC PC female connectors
x 1
Tip box
x 1
User Manual
x 1
Carrying case
x 1
Optional Accessories
2.5mm tip for APC male connectors
1.25mm tip for APC male connectors
Tip for SC APC female connectors
Tip for FC APC female connectors
Tip for LC APC female connectors