Toolocity T-Rex User manual

AppliedDiamond Tools
18102 ChesterfieldAirportRd, UnitO
Chesterfield, MO 63005
Phone: [phone]TollFree: 800-980-7808
Fax: [phone]
Email: [e-mail]
1
T-RexPlanetaryPolisher
InstallationInstructions
Accessories included: hexwrench,Anglewrench, Openend wrench, water
hose, vacuumhose, and splashskirt.
WaterHose
Y-StyleVacuumHose
SplashGuard
Installationsteps:
1.Layplanetarypolisherbaseflat on tableorfloor.

AppliedDiamond Tools
18102 ChesterfieldAirportRd, UnitO
Chesterfield, MO 63005
Phone: [phone]TollFree: 800-980-7808
Fax: [phone]
Email: [e-mail]
2
2. Usethe hexwrenchtoloosen the 3screwson the locking ring completelyto
allowthe spindleof thepolishertofit.
3.Installthe waterhosetothe waterinlet nozzle, and tighten withthescrewon
the waterhose.
Waterinletnozzle
3 hex
screws.
hexwrench

AppliedDiamond Tools
18102 ChesterfieldAirportRd, UnitO
Chesterfield, MO 63005
Phone: [phone]TollFree: 800-980-7808
Fax: [phone]
Email: [e-mail]
3
4.Lubricatethe spindleof thepolisherbeforeinstallationif possible. Makesure
that thereisno guardleveraround the collarof the polisher.
5. Whileplanetarypolisherbaseisonaflat surface, insert the spindleof the
polisherintothe input shafthorizontally.
Tip:Whentryingtothreadthespindleintotheinputshaftinstall oneoftheback holdersand
turnitclock wise.Thespindleshould tightenintotheinputshafteasily.
Lubricatespindle
if possible
Polisherspindle
Threaded input shaft
Collar
ofpolisher
shouldnothavea
lever

AppliedDiamond Tools
18102 ChesterfieldAirportRd, UnitO
Chesterfield, MO 63005
Phone: [phone]TollFree: 800-980-7808
Fax: [phone]
Email: [e-mail]
4
6. UseangleWrenchtotwistinput shaft counter-clockwise, untilspindleistight.
7. Press downon the self-lock button on the polisher.Turnthe back holder
clockwisetocheck if the spindleof thepolisheristightlyturned intothe input
shaft.
Useanglewrench
to
turnCounter-clockwise.
Back holder
Ch
eck ifshaftsare
threadedtightly.
Press
self-lock
button

AppliedDiamond Tools
18102 ChesterfieldAirportRd, UnitO
Chesterfield, MO 63005
Phone: [phone]TollFree: 800-980-7808
Fax: [phone]
Email: [e-mail]
5
8. Laythe machine flat and usethe hexwrenchtotightenthe threescrewson
the collar
9.Usetheopen-end wrenchtoinstalltheothertwobackholders.
10.Wrap theSplashguardaround theperimeterof thepolisherusing the Velcro
and installthe Vacuumhose.
11. The machine isnowreadytobe used!
U
sehexagonalwrench
totightenthethree
screws.
Install theother
twoback holders

AppliedDiamond Tools
18102 ChesterfieldAirportRd, UnitO
Chesterfield, MO 63005
Phone: [phone]TollFree: 800-980-7808
Fax: [phone]
Email: [e-mail]
6
PolisherDismantleSteps:
1.RemovetheSplashguardandVacuumHose.
2.UsetheHexwrenchtoloosenthethree screwsonthecollaronebyone.
3Usetheopen-endwrenchtoremovethethree backholders.
L
oosenthe3
screws
onthecollaroneby
one.
Remove the3back
holders

AppliedDiamond Tools
18102 ChesterfieldAirportRd, UnitO
Chesterfield, MO 63005
Phone: [phone]TollFree: 800-980-7808
Fax: [phone]
Email: [e-mail]
7
4.Press downthepolisher’sself-lock,andusetheAngleWrenchtotwist
theinput shaftclockwise.Until itisloosefromthespindleofthepolisher.
5.Removepolisherfromplanetarybase.
6.Cleantheassemblyandlubricatetheinput shaftthreads. Storethe
planetary baseinadryplace.
Press downthe
self-lock.
R
otatetheWrench
clockwisetoloosen.