TOPSKY DF02.01 User manual

Operation Manual
for Height-Adjustable Desk
Superior Quality
Originated from Germany
OKIN
REFINED
DF02.01

We have 1 year warranly: Within 1 year of receiving the package, the product has
functional damage, please contact our service team with Order-ID. And if that is
possible, pictures or detail of issue will be helpful for a fast way solution.
How to contact with us ?
Email: [email protected]
Customer Service Phone:[phone]
*You can check the installation guide from this YouTube video:
https://youtu.be/xrdva-E0nU4
Or scan this QR code to check the video.
*About how to use, you can see YouTube video ( TOPSKY Electric Adjustable Desk
DF02.01 Major functions )
https://youtu.be/neO0EO-4iFo
You can also scan the QR code to check it:
DO NOT RETURN !!!

Keep children and pets away from the electric high-adjustable desk during the
operation. Unplug the power cord during a thunderstorm or if you do not intend to
use the desk for long time.
Caution
1
Make sure desktop not touch the wall.
Working environment temperature 0-40℃, keep products away from corrosive gas,
liquid and dusty objects.
Ensure no obstacles in the desk’s path, and no any object above 20” under the
desk.
It is strictly forbidden to disassemble the products privately to avoid that the failure of
the products or the damage to the human body caused by electronic products, etc.
Please read following instruction carefully before use the height-adjustable desk.
The company does not bear any warranty or liability for damage and human injury
caused by any abnormal operation.
It is necessary to be reset manually after initial installation or power off.
Although the product with anti-collision function, in order to avoid any pinching,
please ensures that hands or other parts of your body are in a safe position during
the operation. Anti-collision is not enabled during all resets.

BOM
25
min
2
34
5
6
7
8
9
1
3
2
Assembling time Two people
Tools(Need to prepare yourself)
11
12
13
14
15
1
2
3
4
5
6
7
X2
8X12
9X8
16
NO Part name Qty(PCS)
Left Tube
Foot
Column
Side Bracket
Right Tube
Extension Tube
M6*8 Screw
M6*10 Screw
M6*30 Screw
Power Cord
Control Box
Extension Cable
Cable Clip
ST4.8*16 Tapping Screw
ST3.5*16 Tapping Screw
Guide Sleeve
Handset M 1 2 3
17
X2
X2
X2
X2
X2
X8
X8
X8
X4
X1
X1
X1
X1
X6
NO Part name Qty(PCS)
18
10 X8
M6*16 Screw
19 Hex Key Wrench X1
M6*16 Screws Just For the Board Which Sold By TOPSKY, and suggest to take off the rubber from the screw
holes.

Installation Instruction
3
STEP 1
· Set the right tube and left tube flat.
· Insert the extension tube to the right tube and left tube as is shown in the
picture, pre-tighting the screws.
Avoid excessive tightening screws
STEP 2
Avoid excessive tightening screws
STEP 3 ·Mounting the side bracket on the each side of column.
·Fasten the screws.
Connecting rod
Side bracket
M6x10 screw
Fasten the screws
Left Tube
Right Tube
Extension Tube
M6*8 Screw
M6*10 Screw
Avoid excessive tightening screws
Fasten the screws
· Insert the columns into the place which is between the left and right tubes
respectively, line up the holes on the frame and column.
· Pre-tighten the screws.
Guide Sleeve

Installation Instruction
STEP 4
STEP 5
STEP 6
·Install the handset on suitable position of desktop edge to avoid
interference with humans or chairs.
·Tidy up all the power cables, and fasten with cable clip.
▲The frame width is adjustable: 1088~1500mm, which is suitable for different desktop.
4
M6*30 Screw
Foot
ST4.8x16 Tapping Screw
Avoid excessive tightening screws
Fasten the screws
· Check both side of desktop before placing the base on the bottom side of the
desktop.Adjust the suitable width. It is suggested that the two sides of the frame
side brackets are 2 inch from the edge of the desktop and fasten screws.
· Mounting bracket is set on the same side with the handset, between the right
tube and left tube. As shown below,connect related parts, including control
box,extension cable and power cord.
Control Box
·Line up the screw holes on the feet and columns.
·Fasten the screws.
ST3.5x16 Tapping Screw
*Board need to be purchased separately.
*If you have bought the board from TOPSKY, you can
use the M6*16 screws and wrench we supplied.
Control Box and Handset still need tapping
Screws（Suggest use electric drive.）
M 1 2 3

5
Instruction
1.
It is necessary to be reset manually after
the initial installation and power off.
Note: The anti-Collision function is not enabled during all resets. Please note that there is a potential risk
of pinching in this case, and be sure no obstacles in the desk’s path.
● Manual Reset
• Keep pressing down key till display shows “E-1” and “rES” alternately and
release the key.
• Keep pressing down key, the desktop will move slowly down and return back
till the display shows “ 70（27.6''） ”.
2.
• Release the key , the height-adjustable desk can be used normally.
3.
• Once the desktop encounters any obstacle in its path, the screen displays
"E-2".
1.
Before use, please make sure removing obstacle in
advance and human body is in the safe position.
● Anti-Collision function
• The desktop will move a defined distance in opposite direction, and it would
be used normally after removing the obstacle.
● Saving position
1. • Adjust the desktop to the height you want to save.
2. • Keeping pressing “M” key , till the display will show “S --”.
• Press "1" , and the display will show alternately as “S-1” and the desktop
height.
3.
• Keep pressing up key till the required height is reached.
1.
● Up and Down
• Keeping pressing down key till the required height is reached.
2.
rES
70
• Press “M” key, the first memory position is set successfully .Similar progress
for 2 and 3 memory positions.
4.

6
Instruction
• Keep pressing the key “M” for 3 seconds till the display shows “S--” to enter
setup menu.
1.
5.
Do not enable this function only when you
are really need in some situation.
Note: By this function would be used to limit the movement area of desktop, when the container is underneath
or any shelf above the desktop. Once it is set, the new upper or lower limitation position will be stored.
Note: The function enables you to change the height shows on the display based on the actual measurement.
● Container and self-stop positions
• Press up key till the display flash as “HLP”.
2.
3.
4.
• Keep pressing key “M” till the display show “S--” to enter the setup menu.
1.
● Change the displayed Unit(cm/inch)
• Press “up” key, the display will show “Unt”.
2.
3.
5.
HLP
H-P
1 • Press “1”, the display show alternately as “H-P” and current height.
• Keep pressing up or down key till the required upper limit position is reached.
• Press “M”, the desktop height will be showed and the self-stop position has
been set.
• Press “2” after step 1 and 2, the display will show alternately “L-P” and current
height, keep pressing down key till the lower limit position is reached, press M,
the container stop position has been set.
6. L-P
2
2
1
• Press “1” , and the display will show alternately as “Unt” and the desktop height
unit by “cm”.
• Press “M” key to save the unit as cm.
• Press “2” after step1 and 2, and the display will show alternately as “Unt” and
the desktop height unit by “inch”,press key “M” to save the unit as inch.
2
1
4.
Unt
● Amend the desktop height displayed
3. • Keep "Up" or "Dn" several times, till the display show "End" and height.(In this
case, the unit is mm or inch when this system's metric or imperial)
4.
• Keep pressing down key till display shows “E-1” and “rES” alternately and
rES release the key.
1.
• Keep pressing key "M" till the display show "Ur" and "OFF" alternately.
2.
• Press "1","2" and "3" respectively, and to adjust the first number, the second
number and the third number. If you click one, the number will increase by 1,till
you get to the value you want.
3

7
• Once the display shows “E-3” and “rES”, it reminds you check whether any
motors fail connected with control unit. Please connect the main cable again,
wait at least 5 seconds.
1.
The function can detect whether the motors are
collected normally.
● Plug detection
• Connect all the plugs.
2.
• Follow manual reset procedure.
3.
Instruction
E-3 rES
rES
• Keep pressing “M” till the display shows “FAC”.
1.
With this function, you can make the control unit
to factory setting.
● Reset to factory setting
• Press “M”, and the control unit to factory setting (including memory position,
container and self-stop position, etc).
2.
• Press "M" the height has been changed to defined digit.
5.

【Code meaning】
Information Operating
Manual resetting Refer to the progress of manual reset
Overloading Remove the load on desktop till it less than 800N (175 LBS)
for further operation
Anti-Collision function It can be used normally after removing the obstacle
Operated continuously
without suitable rest Make the desk rest around 15minutes for further operation
Code
rES
ovr
E-2
dut
【Trouble shooting】
Operating
Stop the operation and reset, refer to Manual reset
Check the cables and ensure they are well connected, and the
height-adjustable desk can be used normally after manual reset
Code
E-4 / The height between two legs exceed 1 inch
E-3
8
Code meaning and Trouble shooting
【Technical Data】
Item Data
Input voltage 220~240VAC / 100~130VAC
output voltage 24VDC
Max loading 1000N
Height range
(without desktop) 70～120（27.6"～47.3"）
Duty cycle 2 min on/ 18 min off
Technical Data