TUHOME Furniture Congo ELG5968 User manual

If any parts are broken or missing please contact us.
Our customer service team will provide you help
to resolve any issues immediatly
ASSEMBLY INSTRUCTIONS
DESK
It’s much better if you get some company for this!

2
Index
Hi! my name is
Armando, and I’ll be
with you while you
assemble this cabinet.
What will you need?
Where should you start?
What’s in the hardware bag?
Let’s start assembling!
Our last recommendations for taking care of your cabinet
2
3
How much weight does your cabinet resist?
How do the dowels and Minifix system work?
(We also explain what they are)
4-5
6
7-18
19
20
What will you need?
A flat, smooth surface. You can use the
cardboard of the box or a rug.
An electric screwdriver isn’t necessary, but it
can make the work much easier :)
Phillips head screwdriver Flat head screwdriver Rubber hammer
Hammer

3
Where should you start?
(When the cabinet is already assembled
there’s no warranty for this)
This is so IMPORTANT!
Over the next few pages is the
panel and hardware content for this
cabinet.
Please make sure that the quantity
of each one is correct, and that
everything is in good shape.
A - x1
B - x1
C - x1
D - x1
E - x1
F - x2
G - x1
H - x1
I - x1
J - x1
K - x1
L - x1
M - x1
N - x1
Panel quantity

4
What’s in the hardware bag?
Be careful!, try not to lose anything from this bag, its
content it’s neccesary for assembling you cabinet.
x22
Wood dowel
x22
Minifix cam
Spreading bolt
x22
Cover caps
x30
x1
Glue
x4
Flat head
screw
x28
Drywall
screw
Leg + Leveler +
Screws
x1
2"
Hinge
+ screws
x2
Leg
x4
Drywall
screw
x12
1 1/4“
Handle
x2

5
What’s in the hardware bag?
Be careful!, try not to lose anything from this bag, its
content it’s neccesary for assembling you cabinet.
x1
Corner brace
x2
Slides +
screws
Drywall
screw
5/8"
x12

6
How do the dowels and Minifix system work?
Wood dowels
this is so important too!
They are little wooden cylinders.
1
Before inserting the
dowel, put a drop of
glue inside the drilling.
2
Put in the dowel and
softly hit it with the
rubber hammer, until it’s
fully inside.
Everytime you’re using one of these
connectors during the assembly, you
should follow these same steps.
Don’t forget to gently hit the panels to
adjust the joint.
3
When joining two panels together,
you should put another drop of
glue in the drillings where the
dowels are going.
Minifix system
It’s a joint compound of two parts: a spreading bolt and a Minifix cam.
2You should insert these cams
with the little arrow pointing
towards the drilling on the
panel’s edge (shown on the
left).
3This is a spreading bolt.
You should put it with the
black plastic part facing down.
4After joining two panels
together you should turn the
cams 180° with a phillips
head screwdriver to adjust
and secure the joint.
1This is a Minifix cam.
It has a little arrow on its
upper surface.
small arrow

7
Let’s start assembling!1
2
You can see the last page of this manual to have
a full look of the panels of this cabinet.
G
Fx2

8
3
4
Drawer slides installation
To begin, you must take out the smaller part of the slide, pushing
down the black plastic part shown below:
(apply for steps 3 and 5)
Take the bigger part of
the slide and place it
over the panel. The
plastic stop shoud go
towards the back.
Front
28
D
Front
Down
D
F
F
G
5

9
5
6
If you want to recall how to
install this part of the slides,
go to the 3rd step again.
Front
Down
C
C
G
D
F
F
2
5
8

10
7
Turn this
panel over
B
B