Montessori Furniture Cloud User manual

Bed "Cloud"
ASSEMBLY DETAILS
5 - Left plank under
slats
1 pc.
6 - Right plank under
slats
1 pc.
7 - Sidebeam connector
1 pc.
8 - Bedhead plank
1 pc.
9 - Foot plank
1 pc.
10 - Slats plank
2 pcs.
11 - Leg #1
2 pcs.
12 - Leg #2
2 pcs.
13 - Bedhead
1 pc.
14 - Big side cloud
1 pc.
15 - Small side cloud
1 pc.
16 - Front cloud part
1 pc.
17 - Shelf
1 pc.
18 - Lag
6 pcs.
19 - Slats
1 pc.
a - Blind nut M6x15
5 pcs.
b - Flat head screw
M6x25
5 pcs.
c - Flat head screw
M6x30
8 pcs.
d - Self-tapping screw
6.3x40
10 pcs.
e - Confirmat screws
5x40
6 pcs.
f - Self-tapping screw
5x50
6 pcs.
g - Self-tapping screw
3.5x35
10 pcs.
h - Self-tapping screw
3.5x25
16 pcs.
i - Wooden dowel 8x30
8 pcs.
j - 3 mm hex key
1 pc.
k - 4 mm hex key
2 pcs.
l - Screwdriver
1 pc.
m - Leveling
6 pcs.
1. Left sidebeam
with leg
1 pc.
2 - Right sidebeam
with leg
1 pc.
3 - Right sidebeam
without leg
1 pc.
4 - Left sidebeam
without leg
1 pc.
700
700
53
633

Pic. 2
Screw the bedhead plank (8) to the planks under slats (5, 6) using the screwdriver (l)
and screws (f).
Screw the plank (7) to the planks (5) and (6) using the screwdriver (l) and screws (g).
! Mind the position of grooves on planks under slats (5, 6).
Pic. 1
Insert the wooden dowel (i) into the sidebeams with legs (1, 2).
Connect the leg (11) to the beam (1) using the hex key (k).
Connect the leg (12) to the beam (2) using the hex key (k).
Screw the levelings (m) into the parts as shown on Pic.1.1
Bed "Cloud"
с
2с
12
m
m
i
11
с
1
m
с
i
m
86
5
7
f
g
!
!
f

Pic. 4
Connect the bedhead (13) to the previously assembled construction with
the screws (d) and a hex key (k).
Connect the bedhead(13) to the previously assembled construction with
the screws (f) and a screwdriver (l).
Connect the shelf (17) to the bedhead (13) with the confirmation screws (e)
and a hex key (j).
Pic. 3
Insert the wooden dowels (i) into the right and left sidebeams with legs (1, 2).
Screw the beams (1) and (2) with the screws (d) and a hex key (k).
2
1
d
i
7
i
d
f
d
d
8
17
13
f
17
f
d
e
e

Pic. 6
Connect the beams (3) and (4) to the plank (10) using the screws (g) and a
screwdriver (l).
Insert the wooden dowel (i) into the beams (3) and (4).
Connect the beam (3) to the leg (11) with the screw (c) and a hex key (k).
Connect the beam (4) to the leg (12) using the screw (c) and a hex key (k).
Screw the levelings (m) into the legs (11) and (12) as shown inn the Pic.6.
Pic. 5
Screw the big and small cloud parts (14, 15) to the previously assembled
construction with the screws (b) and nuts (a) using both hex keys (k).
Connect the bedhead (13) and the big could part (14) with the confirmat screws (e)
and a hex key (j).
15
14
b
a
14
15
e
e
b13
10
3
11
g
c
g
i
m
11
4
10
gi
g
c
12
m

Pic. 8
Put one assembled construction on the other as shown in the Pic.8.
Choose the necessary position and fix it with the screws (c).
Pic. 7
Screw the foot plank (9) to the foot with the screws (g) and a screwdriver (l).
Screw the front lound part (16) to the assembled construction with the screws (d)
and a hex key (k).
16
9
d
g
g
16
d
d
с

Pic. 9
Screw the lags (18) with the screws (h) as shown in the picture with
the screwdriver (l).
Connect the slats (19) with the screws (h) as shown on the picture
using the screwdriver (l).
The products is meant for indoor use only.
To be used for its intended purpose only and under the direct
supervision of an adult!
All the responsibility for children’s injuries received during
games on the furniture lies on adults watching after them.
Always be vigilant during children's play.
19
18