Toptech TT-N-851 User manual

OPERATING MANUAL
Caution:
Equipment damage hazard
Do not operate the cooling
system if the outdoor
temperature is below 50˚ F
(10˚ C) to prevent possible
compressor damage.
Thermostat Quick Reference
Thermostat Operation
Thermostat Options
Contact Us and Warranty Registration
2
3
4
5
Congratulations on purchasing a
new thermostat. This thermostat was
designed to the highest reliability and
ease of use standards. Thank you for
choosing TopTech.
® U.S. Registered Trademark. Patents pending.
Copyright © 2010 Pro1 IAQ, Inc. All rights reserved. Rev. 1026
Table of Contents Page
1
Need Help?
For assistance with this product
please visit http://toptech.pro1iaq.com
or call TopTech Customer Care
toll-free at 888-776-1427
during normal business hours
(Mon-Fri 9 AM - 6 PM Eastern).
Una versión española de este
manual puede ser descargada
en http://toptech.pro1iaq.com
This manual covers TopTech models:
TT-N-851

THERMOSTAT QUICK REFERENCE
Battery information
2
On the back of the thermostat insert
2 AA Alkaline batteries (included).
Pull the thermostat directly away
from the wall to access the batteries.
A firm tug will be required to remove
the thermostat from the subbase
mounted on the wall.
Getting to know your thermostat
2
Fan Button
3
System Button
4
Button Access Door
5
Temperature Setpoint Buttons
6
Light Button (Glow in the dark)
6
1
2
3 4
5
Important:
The low battery indicator is displayed
when the AA battery power is low. If the
user fails to replace the battery within
21 days, the thermostat display will only
show the low battery indicator as a final
warning before the thermostat
becomes inoperable. The batteries are
located on the back of the thermostat.
LCD
1
+1 will appear in the
display when second
stage of heat or cool
is on. +2 will appear
for third stage of heat.
System operation
indicators: The COOL,
HEAT or FAN icon will
display when the COOL,
HEAT or FAN is on.
NOTE: The compressor
delay feature is active if
these icons are flashing.
The compressor will not
turn on until the 5 minute
delay has elapsed.
Low Battery Indicator:
Replace batteries when
this indicator is shown.
Indicates the current
room temperature.
Displays the user
selectable setpoint
temperature.
Use the “+” or “-” keys to select your desired
room temperature. A copy of the Operating
Manual can be downloaded at www.pro1iaq.com
Fan System

THERMOSTAT OPERATION
3
Caution:
When the battery icon
appears replace your AA
batteries immediately. Failure
to do so may result in your
heating & cooling system
becoming inoperable.
Easy to use controls
LCD Display:
See page 2 for details about this display
read out and icons.
1
2
3
4
5
Glow in the Dark Light Button:
The glow in the dark light button will
self illuminate for several hours after
exposure to ambient light. This button
turns on the display light when pressed.
Temperature Setpoint Buttons:
Press the +or - buttons to select the
desired room temperature.
Fan Key:
Select ON or AUTO. The ON key will run
the fan continuously. The AUTO key will
cycle the fan on only when the heating or
cooling system is on.
System Key:
Selects the operation mode of your
HVAC system. Selecting HEAT
turns on the heat mode. Selecting
COOL turns on the air conditioning
mode. Selecting OFF turns both
heating and cooling off. Selecting
AUTO will turn the HEAT or COOL
on as needed. (EM Heat will appear
as an option if operating a heat
pump. EM Heat setting will turn on
Emergency Heat)
1
2
3 4
5
A Note About Auto Changeover:
Auto changeover will switch between
heating and cooling as needed. It is very
important to make sure the cooling
setpoint temperature is at least 3º above
the heating setpoint temperature and that
the heating setpoint temperature is at least
3º below the cooling setpoint temperature.
Use the “+” or “-” keys to select your desired
room temperature. A copy of the Operating
Manual can be downloaded at www.pro1iaq.com
Fan System

THERMOSTAT OPTIONS
Filter Change Reminder
If your installing contractor has configured the
thermostat to remind you when the air filter
needs changed, you will see FILT in the
display when your air filter needs changed.
FILT will be shown in the display after your
system has run long enough to require an air
filter change.
Resetting the filter change reminder:
When FILT reminder is displayed, you should
change your air filter and reset the reminder by
holding down the FAN button for 3 seconds.
4
Hold down for 3 seconds,
to reset filter reminder.
Keypad Lockout Note:
If appears in display then
the keypad is locked. All or
some of the keys will not
work. Hold the FAN and
SYSTEM keys for 3 seconds
to remove the lock.
Use the “+” or “-” keys to select your desired
room temperature. A copy of the Operating
Manual can be downloaded at www.pro1iaq.com
Fan System

5
CONTACT US AND WARRANTY INFORMATION
Warranty Registration:
Your new TopTech thermostat has a 5 year limited warranty. You must register your warranty
within 60 days of installation. You can register your new thermostat in 2 ways.
Go to toptech.pro1iaq.com, select warranty registration and fill out a short registration form.
-or-
Complete the form below and mail it to the address shown.
Name: ____________________________
Address: ____________________________
____________________________
City: ____________________________
State: ____________________________
Zip: _____________________
Thermostat Model: _____________________
Date Installed: _____________________
Contact Us Information
TopTech Warranty Registration:
1
2
TopTech by Pro1
1111 S. Glenstone
Suite 2-100
Springeld, MO 65804
Toll-free: 1-888-776-1427
Toll Number (Outside the USA): 330-821-3600
Web: http://toptech.pro1iaq.com
Hours of Operation: Monday - Friday 9 AM - 6 PM Eastern
Complete form and mail to:
TopTech by Pro1
1111 S. Glenstone
Suite 2-100
Springeld, MO 65804