Toro Pro Force Debris Blower User manual

FormNo.3404-625RevA
10GallonFuelTankKit
ProForce®DebrisBlower
ModelNo.130-4371
InstallationInstructions
WARNING
CALIFORNIA
Proposition65Warning
ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato
causecancer,birthdefects,orreproductiveharm.
1
RemovingtheFuelTank
NoPartsRequired
Procedure
1.Parkthemachineonalevelsurface,shutofftheengine,
chockthewheels,disconnectthebattery,andremove
thekeyfromtheignitionswitch.
2.Allowtheenginetocool,thendrainthefueltank.
Note:Disposeoffuelproperly.Recycleaccording
tolocalcodes.
3.Restarttheengineandrunituntilitstops.
4.Choketheengine.Startandruntheengineuntilitwill
notstart.
5.Disconnectthefueltankhosesfromthemachineand
discardthem(Figure1).
Note:Retainthehoseclamps.
6.Removethefastenersandstrapssecuringthefueltank
tothemachineanddiscardthemalongwiththetank
(Figure1).
7.Disconnecttheremaininghosesfromthecarbon
canister(Figure1).
Note:Retainthehoseclamps.
8.Removethebatterycoverandbattery(Figure1);refer
toyourOperator’sManual.
9.Removethecarboncanisteranddiscardit(Figure1).
Figure1
1.Batterycover3.Fuel-tankhoses
2.Carboncanister4.Fueltank
©2016—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved*3404-625*A

2
Installingthe10GallonTank
NoPartsRequired
Procedure
1.Drill4holes(3/8inch)intheexistingfueltanktrayas
showninFigure2.
Figure2
1.2.18cm(0.86inch)3.2.03cm(0.80inch)
2.Drillhere.4.2.79cm(1.10inches)
2.Attachthenewfuel-tanktraytotheexistingfuel-tank
trayandsecureitwith4ange-headbolts(5/16inch)
and4angenuts(5/16inch)throughtheholesinthe
tray(Figure3).
Figure3
1.Flangenut(5/16inch)3.Newfuel-tanktray
2.Flange-headbolt(5/16
inch)
3.Attachthecarbon-canisterbrackettotheframeusing2
bolts(1/4inch)and2angenuts(1/4inch)asshown
inFigure4.
Note:Ifthebracketdoesnotperfectlylineupwith
theexistingholes,widenthemslightlyusinga7cm
(0.281inch)drillbit.
Figure4
1.Flangenut(1/4inch)3.Bolt(1/4inch)
2.Carbon-canisterbracket
4.Securethecarboncanistertothecarbon-canister
bracketusingthecanisterstrapand2carriageboltsand
angenuts(3/8inch)asshowninFigure5.
Figure5
1.Carbon-canisterbracket4.Canisterstrap
2.Flangenut(3/8inch)5.Carboncanister
3.Carriagebolt
2

5.Attachthepadstothefuel-tankstraps(Figure6).
Figure6
1.Newfuel-tankstraps3.Newfueltank
2.Pad4.Flangenut(1/4inch)
6.Securethenewfueltanktothefuel-tanktrayusingthe
strapsand4angenuts(1/4inch)asshowninFigure6.
7.Attachthehoseadapterandshorthosetotheinline
fuellterandsecureittothebottomofthecarbon
canister(Figure7).
Figure7
1.Shorthose3.Inlinefuel-lterhose
2.Hoseadapter
8.Attachthe1.6m(65inch)hosetothefueltankand
fuellterusingthepreviouslyremovedhoseclampsas
showninFigure8.
Note:Ensurethatthehoseisroutedthroughthehole
intheframe.
Figure8
1.Fuellter3.1.5m(61inch)fuelhose
2.Carboncanister4.1.6m(65inch)fuelhose
9.Attachthe1.5m(61inch)hosetothefueltankand
carboncanisterusingthepreviouslyremovedhose
clampsasshowninFigure8.
Note:Shortenthehoseifitistoolongforyour
machine.
10.Attachtheventlinehosetothecarboncanisterusing
thepreviouslyremovedhoseclamp(Figure9).
Figure9
1.Ventlinehose
3

11.Snapthetieclipontothesideofthefuel-tanktrayand
securethe2fuel-tankhosestoit(Figure10).
Figure10
1.Tieclip
12.Installthepreviouslyremovedbatteryandconnectit
tothemachine;refertoyourOperator’sManual.
13.Installthebatterycover.
4