Toro TimeCutter Manual

FormNo.3363-807RevA
TimeCutter™RidingMowers
ModelNo.Allmodels
SetupInstructions
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescriptionQty.Use
1Nopartsrequired–Setupthemotioncontrollevers.
2Nopartsrequired–Connectthebattery.
IgnitionKey1
Hosecoupling1
Operator’sManual1
EngineOperator’sManual1
3
OperatorTrainingMaterial1
CompletetheSetup.
Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
1
SettingUptheMotionControlLevers
NoPartsRequired
Procedure
1.Removetheupperbolt(3/8x1inch)andwasher;loosenthelowerbolt(3/8x1inch)asshowninFigure1.
Raisethemotioncontrollevers.
2.Aligntheholesinthemotioncontrolleverwiththeholesinthecontrolarmshaftandinstalltheboltandwasher
removedpreviously(Figure1).Handtightenallfasteners.Repeatthisforbothcontrolslevers.
Figure1
©2009—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.OriginalInstructions(EN)
PrintedintheUSA.
AllRightsReserved

3.Openthemotioncontrolleversandraisetheseat(Figure2).Movethecontrolleversbacktothecenter
position(neutral).
G006481
Figure2
4.Verifythemotioncontrolleversareproperlyaligned(Figure3).Adjustasnecessary.Tightenallfasteners.
G006482
Figure3
2

2
ConnectingtheBattery
NoPartsRequired
Procedure
1.Locatethebatteryandnegativebatterycableinthe
lefthandconsoleofthemachine.
2.Removethefastenersonthenegativebatterypost
andusethemtosecurethenegativebatterycableto
thenegativebatterypost(Figure4).
G005280
1 2 543
Figure4
1.Wingnut4.Negativebatterypost
2.Washer5.Carriagebolt
3.Negativebatterycable
3
CompletingtheSetup
Partsneededforthisprocedure:
1IgnitionKey
1Hosecoupling
1Operator’sManual
1EngineOperator’sManual
1OperatorTrainingMaterial
Procedure
CheckingtheTirePressure
Checkthefrontandreartiresforproperination.Refer
toCheckingtheTirePressureintheOperator’sManualfor
therecommendedinationpressure.
CheckingtheSideDischargeChute
Removethepackingrestraintholdingthesidedischarge
chuteupandlowerthechuteintoplace.
CheckingtheEngineOilLevel
Beforeyoustarttheengineandusethemachine,check
theoillevelintheenginecrankcase;refertoChecking
theOilLevelintheOperator’sManual.
CheckingtheMowerAdjustment
Themowerdeckwasleveledatthefactory.Ifthemower
isnotcuttinglevel,adjusttheside-to-sidelevelandthe
front-to-rearbladeslope.SeetheOperator’sManual
fortheproperprocedure.
ReviewtheRemainingParts
Keepallthefollowingitemswiththemachine:
•IgnitionKey
•Hosecoupling
•Operator’sManual
•EngineOperator’sManual
•ViewtheOperatortrainingmaterial.
3