Toshiba 42HP82 User manual

IUAL

Introduction
Introduction to the Plasma Monitor
TosNba plasma monitor is a _less blend _ cutfi_-ed_
visual technology and so_sticated design, At 42-incbes, with
a 16:9 aspect ratio, the Plasma monitor certainly
makes a big impression, However, a/a mere 3.5 incbes!89
mm lhin, the monitor's sleek techno-art lines blend in
well with your environment, PlKsmaSync's crisp, vivid image
quality will transform da/a from any graphic medium from
PCs lo DVD players- into art, And weighing only 65 lbs/
29,5 kg it actually can be hung almost anywhere.
Toshiba h_s made sure lhal a host of multimedia resources
can be easily connected and displayed as brilliantly as
intended on the plasma monitor,
The features you'll enjoy include:
•42-inch screen
• 16:9 aspect ratio
• Capsulated Color Filler (CCF) and black malrix
• The enhanced display in red uses a two-stage filtering
sys/em where Accucrimson TM is combined wilh our special
CCE
• 3,5 inch /89 mm thin
• 65 lbs/29,5 kg light
• High-resolutionscreen; 1024X768pixels
• 160-degrees of off-axis viewing, horizontally and vertically.
• Flicker - and warp - free display provides excellent image
geometry even in screen comens
• Not afPecled by magnetic fields, no color drift or edge
dislortion,
• VGA, SVGA, XGA, SXGA, UXGA compuler signal
compatibility
• NTSC, PAL, SECAM, composi/e and S-Video signal
compatibility
• 480R 1080t, 720P and HDTV signal compa/ibilily
• PCs, VCRs, Laser Disc and DVD player source
compatibility
• Acc uBlend scan conversion automatically converts SVGA,
XGA, SXGA and UXGA signals to the panel's native
resolution
• Advanced MassArea Sampling Progressive Scan method
is employed,
• RGB input (3*), Video input (3*), DVD/HD input (2*),
Audio input (3), External Control input (1)
• AccuColor control system provides user selectable on-
screen color lemperature settings
• New Drive Technology
• Component video input terminal for DVD, 15,75kHz (Y,
CB, CR )
• Digital broadcasting source compatibility
• OSM menu-driven on screen control syslem thai makes
image adjustments a snap
• Seven languages (English, German, French, Italian,
Spanish, Swedish, and Japanese)
* You can select RGB source, Component source or Video
source for the 5BNC terminal. When selecting an RGB input,
the source is switched to the RGB input (3); when selecting a
component input, the source is switched to the DVD/HD input
(2); when selecting a Video source, the source is switched to
the Video input (3).
Contents of the Package
[] Plasma monist
[] Power cord
[]RGB cable (Mini D-Sub 15-pin to Mini D-Sub 15-pin
connector)
[]Remole control wilh two AAA Batteries
[] User's manual
[] Remole cable
[] Safely metal fittings*
[] Screws for safely metal filling*
[] Ferri/e core (small × 2, large × 2), band
* These are fittings for fas/ening the unit to a wallto prevent tipping
due to external shock when using the sta]ld (option). Fasten the
safety fittings to the holes in the back of the monitor using the
safety fitting mourn screws.
Options
• Wall mount unit
• Ceiling mount unit
• Tilt mount unit
• Stand
•Allachable speakers
• Pole unit
• Horizontal Ix)le mount unit

Important Information
Precautions
Please read this manual carefully before using your Toshiba
plasma monitor and keep the manual handy for future reference.
[ : TIJli[e
,_k RISK OFELECTRIC SHOCK//_
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER. NO
USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
/¢,This symbol warns the user that uninsulated
voltage within the unit may have sufficient
magnitude to cause electric shock,
Therefore, it is dangerous to make any kind
of contact with any part inside of this unit,
AXThis symbol alerts the user that important
literature concerning the operation and
maintenance of this unit has been included,
Therefore, it should be read carefully in
order to avoid any problems.
WARNING
TO PREVENTFIREOR SHOCKHAZARDS,DO NOTEXPOSE
THIS UNIT TO RAIN OR MOISTURE. ALSO DO NOT USE
THIS UNITS POLARIZEDPLUGWITHAN EXTENSIONCORD
RECEPTACLE OR OTHER OUTLETS, UNLESS THE
PRONGS CAN BE FULLY INSERTED. REFRAIN FROM
OPENING THE CABINET AS THERE ARE HIGH-VOLTAGE
COMPONENTS INSIDE.REFER SERVICINGTO QUALIFIED
SERVICE PERSONNEL.
Warning
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct
the interference at his own expense.
Warnings and Safety Precaution
This Toshiba plasma monitor is designed and
manufactured to provide long, trouble-free service.
No maintenance other than cleaning is required. Use
a soft dry cloth to clean the panel. Never use
solvents such as alcohol or thinner to clean the panel
surface.
The plasma display panel consists of fine picture
elements (cells) with more than 99.99 percent active
cells. There may be some cells that do not produce
light or remain lit.
For operating safety and to avoid damage to the unit,
read carefully and observe the following instructions.
To avoid shock and fire hazards:
1. Provide adequate space for ventilation to avoid internal
heat build-up. Do not cover rear vents or install the unit
in a closed cabinet or shelves.
The unit is equipped with cooling fans.
if you install the unit in an enclosure, make sure there
is adequate space at the top of the unit to allow hot air
to rise and escape, if the monik_r becomes too hot, the
overheat proteck)r will be activated and the monitor will
be turned oft2 If this happens, turn offthe power to the
monitor and unplug the power cord. if the room where
the monitor is installed is particularly hot, move the
monitor to a cooler location, and wait for 60 minutes to
cool the monitor. If the proNem persists, contact your
dealer for service.
2. Do not use this unit polarized plug with extension cords
or outlets unless the prongs can be completely inserted,
3. Do not expose the unit to water or moisture,
4. Avoid damage to the power cord, and do not attempt to
modify the power cord,
5. Unplug the power cord during electrical storms or if
the unit will not be used over a long period,
6. Do not open the cabinet which has potentially dangerous
high voltage components inside, If the unit is damaged in
this way the warranty will be void. Moreover, there is a
serious risk of electric shock.
7. Do not attempt to service or repair the unit, Toshiba is not
liable forany bodily harm or damage caused if unqualified
persons attempt service or open the back cover. Refer
all service to authorized Toshiba Service Centers.

NOTE:
When you connect a computer to this monitor, attach
the supplied ferrite cores. If you do not do this, this
monitor will not comform io mandatory FCC standards,
Attaching the ferrite cores:
Set the ferrite cores on both ends of the DV[ cable (not
supplied), and both ends of the power cable (supplied),
Close the lid tightly until the clamps click,
Use the band to fasten the ferrite core (supplied) to the
DVI cable,
DVI cable (not supplied)
band band Conne_or
core (small) core (small)
Power cable (supplied) core (large) an
core (large)
To avoid damage and prolong operating life:
1. Use only with 120V 50/60Hz AC power supply,
Continued operation at line voltages greater than 120Volts
AC will shorten the life of the unit, and might even cause
a fire hazard.
2. Handle the unit carefully when installing it and do not
drop.
3. Set the unit away from heat, excessive dust, and direct
sunlight.
4. Prolect the inside of the unit from liquids and small
metal objects, in case of accident, unplug the power
cord and have it serviced by an authorized Service
Center.
5. Do not hit or scratch the panel surPace as this causes
flaws on the surPace of the screen.
6. For correct installation and mounting it is strongly
recommended to use a trained, authorized dealer.
7. As is the case with any phosphor-based display (like a
CRT monitor, for example) light output will gradually
decrease over the life of a Plasma Display Panel.
Recommendations to avoid or minimize phosphor burn-in
Like all phosphor-based display devices and all other gas
plasma displays, plasma monitors can be susceptible to
phosphor burn under certain circumstances, Certain
operating conditions, such as the continuous display of a
static image over a prolonged period of time, can result in
phosphor bum if proper precautions are not taken, To protect
your investment in this plasma monitor, please adhere to the
following guidelines and recommendations for minimizing
the occurrence of image bum:
* Always enable and use your computer's screen saver
fanction during use with a computer input source.
* Display a moving image whenever possible.
* Change the position of the menu display from time to time.
* Always power down the monitor when you are finished
using it.
if the plasma monitor is in long lerm use or continuous
operation take the following measures to reduce the
likelihood of phosphor burn:
* Lower the Brightness and Contrast levels as much as
possible without impairing image randabilily.
* Display an image with many colors and color gradations
(i.e, photographic or photo-realistic images),
* Create image content with minimal contrast between light
and dark areas, fan example while characlers on black
backgroands, Use complementary or paslel color whenever
possible,
* Avoid displaying images with few colors and distinct,
sharply defined borders between colors,
[ * Burn-in is not coanred by the warranty, [
Contact your dealer for other recommended procedures that
will best suit your particular application needs.

Contents
How to Attach Options to the Plasma Monitor .... I
Part Homes and Function .................................. 2
FrontView ............................................................... 2
RearView /Terminal Board ...................................... 3
RemoteControl ........................................................ 4
BatteryInstallation and Replacement .......................... 5
Using the wired remote control mode ......................... 6
Operating Range ..................................................... 6
Handling the remote control ...................................... 6
Installation ...................................................... 7
ConnectingYourPCor MacintoshComputer............... 8
ConnectionswithEquipmentthathasa DigitalInterface... 8
ConnectingYourDocumentCamera........................... 8
ConnectingYourVCRor LaserDiscPlayer.................. 8
ConnectingYourDVDPlayer..................................... 8
AttachableSpeakerConnections................................ 9
PinAssignmentsandSignalLevels
for 15pin RGB(Analog)......................................... 10
PinConfigurationandSignal
of theRGB3 IN Connector(DVIConnector).............. 10
BasicOperations ............................................. I!
POWER................................................................ 11
To turn the unit ON and OFF: .................................... l l
VOLUME.............................................................. 11
'lb adjust the sound volume: ...................................... 11
MUTE................................................................... 11
To cancel the sound: .................................................. 11
DISPLAY................................................................ 11
_lb check the settings: ................................................. l l
DIGITAL ZOOM ..................................................... 1l
OFF TIMER........................................................... 12
"l_ set the off timer: ................................................... 12
"l_ check the remaining time: ..................................... ]2
_1_cancel the offtimer ............................................... 12
WIDE Operations ............................................. 13
Watching with a wide screen (manual) .................... 13
When watching videos or digital video discs ............. 13
When watching high definition video source ............. 13
Watching computer images with a wide screen ......... 14
OSMControls ................................................. 15
Menu Operations ................................................... 15
Picture Settings Menu ............................................. ] 7
Adjusting the pictm-e ................................................. 17
Setting the picture mode according to the
brighmess of the room ............................................... 18
Setting the color temperature .................................... 19
Adiusting the color to the desired quality ................... 20
Reducing noise in the picture ..................................... 21
Sound Settings Menu .............................................. 22
Adjusting the treble, bass and let,/right balance ........ 22
Screen Settings Menu ............................................. 23
Adjusting the Position, Size, Fine Picture,
Picture Adi ................................................................ 23
Function Settings Menu .......................................... 24
Setting the on-screen menu ....................................... 24
Adjusting the position of the menu display ................ 25
Setting the power management for computer images ..... 26
POWER/STANDBY indicator ................................... 27
Setting the gay level for the sides of the screen ......... 28
Setting the picture to suit the movie ........................... 28
Setting RGB3 ADJ ..................................................... 29
Reducing bum-in of the screen .................................. 29
Setting the time for "INVERSE". ............................... 30
Setting the time for "SCREEN WIPER". ................... 31
Resetting to the det:ault values .................................... 32
Options Settings Menu ............................................ 33
Setting the allocation of the audio connectors ........... 33
Setting the BNC connectors ...................................... 34
Setting a computer image to the correct RGB
select screen ............................................................. 34
Setting high definition images to the suitable
screen size ............................................................... 35
Information Menu ................................................. 36
Checking the fi-equencies, polarities of input signals,
and resolution ........................................................... 36
Setting the language for the menus ............................. 36
Setting the video si_aal format .................................. 37
External Control ............................................. 38
Table of Signals Supported .............................. 51
Supported resolution .............................................. 51
Troubleshooting ............................................. 53
Specifications ................................................. 54

HowtoAttachOptionstothePlasmaMonitor
You can attach your optional mounts or stand to the plasma
monitor in one of the following two ways:
* While it is upright. (See DrawingA)
* As it is Laiddown with the screen lace down (See Drawing
B). Lay the protective sheet, which was wrapped around
the monitor when it was packaged, beneath the screen
surface so as not toscratch the screen face.
Drawing A]
• This device cannot be installed on its own.
Be sure to use a stand or original mounting
unit. (Wall mount unit, Stand, etc.)
* See the inside of a cover.
•For correct installation and mounting it is
strongly recommended to use a trained,
authorized dealer.
Failure to follow correct mounting
procedures could result in damage to the
equipment or injury to the installer.
Product warranty does not cover damage
caused by improper installation.
IDrawing BI
* Use only Listed Cart or Stand, or mounting
kit or stand provided by manufacturer.
Ventilation Requirements for
enclosure mounting
To allow heat to disperse, leave space between
surrounding objects as shown on the diagram
below when installing,
31 mm (1.22") I 31 ram (1.22")
iiiiiiiiiiiiiiiiii_i_iiill
r
Li(2")

Part Names and Function
Front View
@Power
Turns the monitor's power on and oft:
@Remote sensor window
Receives the signals from the remote control,
@POWER/STANDBY indicator
When the power is on ............................. Lights green,
When the power is in the standby mode ... Lights red,
@INPUT SELECT /EXIT
Switches the input, in the following order.
The available inputs depend on the setting of"BNC
SELECT".
RGB:
@ LEFT/- and RIGHT/+
Enlarges or reduces the image, Functions as the
CURSOR (_1 /I_) buttons in the On-Screen Menu
(OSM) mode,
@VOLUME DOWN and UP
Adjusts the volume, Funclions as the CURSOR (A/
V) buttons in the On-Screen Menu (OSM) mode,
(.7) PROCEED
Sets the On-Screen Menu (OSM) mode and displays
the main menu,
COME:
VIDEO:
Funclions as the EXIT buttons in the On-Screen Menu
(OSM) mode,
2

Rear View/Terminal Board
A AC IN
Connect the included power cord here,
B EXT SPEAKER L and R
Connect speakers here, Maintain the correct polarity,
CRGB3 (DVI 29pin)
Inputs a digital RGB signal (TMDS).
D VIDEO1, 2
Connect VCR's, DVD's or Laser Discs, etc, here.
EAUDIOI, AUDIO2, AUDIO3
These are audio input terminals,
The input is selectable, Set which video image to allot
them to on the menu screen,
FDVD1 /HD1
Connect DVD's, High Definition or Laser Discs, etc,
here.
GRGB1
Inputs the analog RGB signal of personal computer,
etc,
H
J
K
RGB2/DVD2/HD2
RGB2: lnpms the analog RGB signal and the
syncronization signal,
DVD2/HD2: Connect DVD's, High Definition or
Laser Discs, etc, here.
VIDEO3: Connect VCR's, DVD's or Laser
Discs, etc, here.
CONTROL LOCK
When "CONTROL LOCK" is set "ON", the buttons
on the set's control panel do not function.
REMOTE CONTROL
Connect the supplied remote cable here.
EXTERNAL CONTROL
This terminal is used when power ON/OFF, input
selection and AUDIO MUTE and other controls are
operated externally (by external control). See also page
38 for external control.
3

Remote Control
0
@
®
@
O POWER ON/OFF
Switches Power ON/OFF,
(This does not operate when POWER/STANDBY
indicator of the main unit is off:)
@
@
@
O
O
@
@
@
@
®
4
RGB/PC
Press this button to select RGB/PC as the source.
The available sources depend on the setting of"BNC
SELECT",
RGB: _ RGB/PCl4 RGB/PC2_ RGB/PC3]
COME or VIDEO: _ RGB/PCl_RGB/PC3_
RGB/PC can also be selected using the INPUT
SELECT button on the monitor.
DVD /lid
Press this button to select DVD/HD as the source.
The available sources depend on the setting of"BNC
SELECT",
RGB or VIDEO: HD/DVD/DTV
COME: _ HDIlDVDI/DTVI_ HD2/DVD2/DTV2_
DVD/HD can also be selected using the INPUT
SELECT button on the monitor.
VIDEO
Press this button to select VIDEO as the source.
The available sources depend on the setting of"BNC
SELECT",
VIDEO: _VIDEO1 _ VIDEO2 _ VIDEO3 ][
RGB or COMP.: _ VIDEO1_ VIDEO2
VIDEO can also be selected using the INPUT SELECT
button on the monitor,
PROCEED
Press this button to access the OSM controls,
Press this button during the display of the main menu
to go to the sub menu,
CURSOR (A /•/_1 /I_)
Use these buttons to select items or settings and to
adjust setlings or switch the display patterns,
EXIT
Press this button Io exit the OSM controls in the main
menu. Press this button during the display of the sub
menu to return to the main menu.
POINTER
Press this button to display the pointer.
ZOOM (+/-)
Enlarges or reduces the image.
VOLUME (+/-)
Adjusts the sound volume.
MUTE
Mutes the sound,

O WIDE
Thetypeofbroadcastisdetectedautomatically,and
therecommendedwidescreenisset.
DISPLAY
Displays the source settings on the screen,
OFF TIMER
Activates the off'timer for the unit,
Remote control signal transmitter
Transmits the remote control signals,
Remote Jack
Insert the plug of the supplied remole cable here when
using the supplied remote control in the wired
condition.
Battery Installation and Replacement
Insert the 2 "AAA" batleries, making sure to set them in
with the proper polarily.
1,Press and open the cover.
2,Alignthe battefiesaccordingtothe(+)and( )indication
inside the case.
3,Replace the cover.
5

Using the wired remote control mode
Connect the supplied remote cable to the remote control's
remote jack and the "REMOTE CONTROL" terminal on
the monitor,
When the cable is connected, the mode automatically
switches to wired remote control, When the wired remote
control mode is used, the remote control can be operated
even if no batteries are loaded,
Operating Range
* Use the remote control within a distance of about 7 m/
23ft. from the front of the monitor's remote control sensor
and at horizontal and vertical angles of upto approximately
30°,
* The remote control operation may not function if the
monitor's remote control sensor is exposed to direct
sunlight or strong artificial light, or if there is an obstacle
between the sensor and the remote control.
Remote Control
Cable
To Remote Jack
Approx.
7m/23ft
Handling the remote control
•Do not drop or mishandle the remote control.
• Do not get the remote control wet, if the remote control
gets wet, wipe it dry immediately,
• Avoid heat and humidity,
• When not using the remote control for a long period,
remove the batteries.
• Do not use new and old batteries together, or use different
types together.
• Do not take apart the batteries, heat them, or throw them
into a fire.
• When using the remote control in the wireless condition,
be sure to unplug the remote cable from the REMOTE
CONTROL terminal on the monitor.
6

Installation
VCRor LaserDisc Player
Tovideoinputson
theplasmamonitor
DocumentCamera
IBMVGAorCompatibles
Macintoshor Compatibles
(Desktoptype)
Monitoradapterlor
Macintosh
ignalcable(supplied)
ToMiniDSub15pinconnectorontheplasmamonitor
DVDPlayer
Personal computer with a
digital RGB output
7

ConnectingYour PCor MocintoshComputer
Connecting your PC or Macintosh computer to your plasma
monitor will enable you to display your computer's screen
image tbr an impressive presentation, The plasma monitor
supports the signals described on page 51.
To connect a PC, Macintosh or compa/ible graphics adapter,
simply:
1. Turn off the power to your plasma monitor and compuler,
2. If your PC does not support SXGAiXGA/SVGA/VGA
you will need to install an SXGA/XGAiSVGAiVGA
graphics board. Consult your compumr's owner's manual
for your SXGAiXGAiSVGA/VGA configaration, If you
need to install a new board, see the manual that comes
with your new graphics board for installa/ion instructions.
3. This plasma monitor provides signal compatibility up to
VESA 1600× 1200 (UXGA), However, it is not
recommended to use this resolution due to image
readability on the monitor's na/ive pixel resolution panel
(1024 x 768).
4. Use 1he signal cable that's supplied to connect your PC or
Macintosh compuler to the plasma monitor. For Macintosh,
use the monitor adapter to connect to your computer's
video port.
5. Turn on the plasma monitor and Ihe computer.
6. Ifthe plasma monitor goes blank after a period ofinactivi/y,
it may be caused by a screen saver installed on 1he computer
you've connected to the plasma monitor.
When using a Macintosh with the plasma monitor, the
following tbur display standards are supported using the
Macin/osh adaptor :
13" fixed mode
16" fixed mode
19" fixed mode
21" fixed mode
The 19" fixed mode is recommended,
Connections with Equipment that
has a Digital Interface
Connections can be made with equipment that is equipped
with a digital interface compliant with the DVt (Digital
Visual Interface) standard.
* Use a DVI 29-pin signal cable and the ferrite cores
(supplied) when making connections to the RGB3 IN (DVI)
connector of the main unit.
Note that the RGB3 IN(DVI) terminal does not support
analog RGB input source.
Connecting Your Document Camera
You can connect your plasma monitor to a document
camera. To do so, simply:
1, Turn off the power to your plasma monitor and
document camera,
2, Use a standard video cable to connect your document
camera to the Video input on your plasma monitor.
3, Turn on the plasma monitor and the document camera.
Connecting Your VCR or Laser Disc
Player
Use common RCA canes (not provided) to connect your
VCR or laser disc player to your plasma monitor. To make
these connections, simply:
2.
3_
Turn off the power to your plasma monitor and VCR
or laser disc player,
Connect one end of your RCA cable to the video output
connector on the back of your VCR or laser disc player,
connect the other end to the Video input on your plasma
monitor. Use standard RCA audio patch cords to
connect the audio from your VCR or laser disc player
to your plasma monitor (if your VCP, or laser disc player
has this capability), Be caret_l to keep your right and
lefl channel connections correct for stored sound,
Turn on the plasma monitor and the VCR or laser disc
player.
Connecting Your DVD Player
You can connect your plasma monitor to a DVD player.
To do so, simply:
2.
Turn off the power to your plasma monitor and DVD
player,
Use a standard video cable to connect your DVD player
to the Y, Cb, and Cr inputs on your plasma monitor.
Or use the DVD-player's S-Video output. Use a
standard S-Video cable to connect to the S-Video input
on the plasma monitor,
3, Turn on the plasma monitor and the DVD player.
8

Attachable Speaker Connections
iii!i{i!iiiiiii!iii
III i iiiiiiiiii
Attachable speakers (option) may be connected to the
plasma monitor to reproduce sound from VIDEO, DVD
or RGB signal sources.
Attachable speakers may be connected directly to the
SPEAKERS terminals or indirectly by connecting a stereo
system amplifier to the audio outputs.
To connect attachable speakers directly to the plasma
monitor:
1_ Strip the ends of the speaker wires_
2_ Press up the tabs below the SPEAKERS terminals,
insert the speaker wire and release the tab to secure the
speaker wire connection:
[a] Connect the right speaker (located at right side
of the monitor when viewed from the front)
positive (+) wire to RIGHT +_
[b] Connect the right speaker negative ( ) wire to
RIGHT •
[c] Connect the lefi speaker negative ( ) wire to
LEET_
[d] Connect the left speaker positive (+) wire to
LEFT+.
9

Pin Assignments and Signal Levels for 15 pin RGB (Analog)
*@®®@Q 1 Red
3 Blue
5 Ground
, Re _
7 Green ground
9 No connection
11 No connection
13 Horizontal sync or Composite sync
15 Data clock
Pin Configuration and Signal of the RGB 3 IN Connector (DVI Connector)
The unit is equipped with a type of connector commonly
used for both analog and digital
(Functionally, this cannot be used for an
analog input.)
(TMDS can be used for one link only_)
RGB 3
1 T.M.D.S Data 2 -
T.
3 T.M.D.S Data 2 Shield
5 No connection
7 DDC Data
9 T.M.D.S Data 1 -
T.e ...............................................................................................................
11 T.M.D.S Data 1 Shield
13 No connection
15 Ground
17 T.M.D.S Data 0 -
_8, T-e
19 T.M.D.S Data 0 Shield
21 No connection
23 T.M.D.S Clock +
25 No connection
27 No connection
29 No connection
10

Basic Operations
POWER
To turn the unit ON and OFF:
1, Plug the power cord into an active AC power outlet,
2, Press the POWER ON button (on the remote control)
to turn on the unit,
The monitor's POWER/STANDBY indicator will light
up (green) when the unit is on,
3, Press the POWER OFF button (on the remote control
or the unit) to turn offthe unit,
The monitor's POWER/STANDBY indicator turnsred
and the standby mode is set (only when turning offthe
unit with the remote control),
VOLUME
To adjust the sound volume:
1, Press and hold the VOLUME I_ button (on the remote
control or the unit) to increase sound output to the
desired level.
2, Press and hold the VOLUME (_ button (on the remote
control or the unit) to decrease to the desired level.
DIGITAL ZOOM
Digital zoom specifies the picture position and enlarges
thepicture.
1, Press the POINTER button to display the pointer, ( _, )
To change the size of the picture:
Press the ZOOM+ button and enlarge the picture.
The pointer will change to resemble a magnifying
glass, ( _ )
A press of the ZOOM- button will reduce the picture
and return it to its original size.
To change the picture position:
SeLect the position with the AV_I • buttons,
2, Press the POINTER button to delete the pointer.
MUTE
To cancel the sound:
Press the MUTE button on the remote control to cancel
the sound; press again to restore.
DISPLAY
To check the settings:
1, The screen changes each time the DISPLAY button is
pressed,
2, If the button is not pressed for approximately three
seconds, the indication will disappear.
11

OFF TIMER
To set the off timer:
The offtimer can be set to turn the power off'after 30, 60,
90 or 120 minutes.
1, Press the OFF TIMER button to start the timer at 30
minutes.
2, Press the OFF TIMER button to the desired time.
3, The timer starts when the menu turns off',
_30 _60 _90_ 120 _0_
To cancel the off timer:
1, Press the OFF TIMER button twice in a row,
2, The offtimer is canceled,
ilil_;_i:;!____ii_;_i!ii_iiii_ii!:!_iiiililililililililiiiili_iiiiii!iliiliiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii¸i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!!i!iiiii!iiiiiliiiiiiiiiii_;i!_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i!iiiilliiii!iiiiiiiii!iiiii!ii!iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii;iiiiiiii!i!iiiii;iiilii!iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii;iiii!iiiiii!!!iiii
To check the remaining time:
1, Once theoff'timer hasbeenset,presstheOFF TIMER
button once,
2, The remaining time is displayed, then turns offafter a
few seconds,
3, When five minutes remain the remaining time appears
until it reaches zero.
12

WIDE Operations
Watching with a wide screen (mo.uai)
With this _nction, you can selectone of_ur screensizes,
When watching videos or digital video discs
STADIUM size screen
1, Press the WIDE button on the remote control,
2, Within 3 seconds ...
Press the WIDE button again,
The screen size switches as follows:
_ ZOOM _ NORMAL _FULL _STADIUM _
ZOOM size screen
The picture is expanded in the horizontal and vertical
directions at different ratios,
* Use this for watching normal video programs (4:3) with a
wide screen,
When watching high definition video source
1, Press the WIDE button on the remote control,
FULL size screen (16 : 9)
The picture is expanded in the horizontal and vertical
direction, maintaining the original proportions.
* Use this for theater size (wide) movies, etc.
NORMAL size screen (4:3) The full size screen is displayed,
* The picture has the same size as video pictures (16 : 9),
The normal size screen is displayed.
* The picture has the same size as video pictures with a
4 : 3 aspect ratio.
FULL size screen
The image is expanded in the horizontal direction.
* Images compressed in the horizontal direction ("squeezed
images") are expanded in the horizontal direction and
displayed on the entire screen, (Normal images are
expanded in the horizontal direction.)
13

Watching computer images with a
wide screen
Switch to the wide screenmodeto expandthe4 : 3 image
to fiLLthe entire screen.
1.Press the WIDE button on the remote control.
2. Within 3 seconds...
Press the WIDE button again,
The screen size switches as follows:
7,NoRMA,Fu,,•
NORMAL size screen (4:3 or SXGA 5:4)
Information
•Supported resolution
See page 51 for details on the display output of the
various VESA signal standards supported by the
monitor,
•When 852 (848) dot x480 line wide VGA*
signals with a vertical frequency of 60 Hz and
horizontal frequency of 31.7 (31.0) kHz are in-
put
Select an appropriate setting for RGB SELECT mode
referring to the"Table of Signals Supported" on page
51.
* " IBM PC/AT" and "VGA" are registered trademarks
of IBM, Inc. of the United States,
The picture has the same size as the normal computer
image.
FULL size screen
The image is expanded in the horizontal direction.
When wide signals are input,
FULL size screen
14

OSM(0n Screen Menu) Controls
Menu Operations
The OSM window is displayed with respect to the
screen as shown on the diagram.
* Depending on the screen's mode, the OSM may be
displayed differently,
In the explanation, the OSM section is shown close up.
5_ The adjustment or the setting which you stored is
remained_
The change is stored until you change it again.
6_ Repeat steps 2 5 to adjust an additional item, or press
the EXIT button on the remote control to return to the
main menu.
iiliili¸ii:ii i_ii!iil;i_;;iiiii!;_ii)il i¸iiilii¸iiliii¸i¸i)! ii¸II:iiIi)i;iiiii!!!!!!iiii¸i)i ¸!!?i!!iiiil;ii iii )ii¸i;i¸i;ii?))!;ii_!! i ii¸I¸ii¸Jiiiii;i¸iiiliii)iiiiiiiiiiii!!ii¸ii¸Ji¸i¸)ii!!?iii:
iiii__m!!_!_¸_ _ ¸¸¸¸¸¸!¸¸;. _. ?_..._}}_s_!!_!EXI_. i .2.. _ .? _ ?_ .
The following describes how to use the menus and the
selected items.
1_ Press the PROCEED button on the remote control to
display the MAIN MENU.
2, Press the cursor buttons • • on the remote control to
highlight the menu you wish to enter,
3, Press the PROCEED button on the remote control to
select a submenu or item.
4_ Adjust the level or change the setting of the selected
item by using the cursor buttons "41 • on the remote
control.
15