Toshiba 29CZ6DA User manual

Color Television
OWNER'S MANUAL
Owner's Record
You will find the model number and serial number on
the back of the TV. Record these numbers in the spaces
provided below. Refer to them whenever you call upon
your TOSHIBA dealer regarding this product.
Model number:
Serial number:
29CZ5DE
29CZ6DA
29CZ6TES
Printed in Indonesia
23566823
©TOSHIBA CORPORATION, 2005
All Rights Reserved
EN-01-20[29CZ5DE/29CZ6DA/TES]-1 23/9/05, 9:25 AM1

2
SAFETY INSTRUCTIONS AND MAINTENANCE
For safety
1) If and when anything abnormal occurs, unplug the power cord from the outlet immediately.
Make sure that the smoke has stopped, then contact for a service.
Continual usage of TV in such condition may cause a fire or an electric shock.
2) Do not cut, break, heat, modify, twist, bunch up or bent the cord or apply excessive force
or tension to it, as this may cause damage, fire or electric shock. Contact a service
technician if the power cord is damaged.
3) Do not pull on the power cord when removing the plug from the wall outlet. Always hold
the plug firmly when removing it. If the power cord is yanked, the cord may become
damaged and fire or electric shock may occur.
4) Do not repair, modify or disassemble the TV by yourself. Let qualified technicians check
and adjust your TV. To avoid electrical shock or fire, never modify the TV.
5) Do not place hot objects or naked flame sources, such as lighted candles or nightlights, on
or close to the TV. High temperature can melt plastic and lead to fires.
6) The TV shall not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the TV. This may cause a fire or electric shock.
7) Do not let metallic materials and/or combustibles get in the TV. These items may cause a
fire or an electric shock. Be especially observant when children are present.
8) Do not stand or climb on the TV. The TV is dangerous if it is broken or if it has fallen
down. Be especially observant when children are present.
9) When the TV will not be used for a long period of time, unplug the cord.
10) During lightning storm, do not touch any part of the TV, including the power cord and the
antenna lead-in-wire. You may suffer an electric shock.
2) 3) 4) 5), 6)
7) 8) 9) 10)
EN-01-20[29CZ5DE/29CZ6DA/TES]-1 23/9/05, 9:25 AM2

3
Notes on installation and on use
11) Place the TV on a horizontal, stable surface. Avoid location subject to vibration. Do not
place the TV on its side or back. Otherwise, the TV may drop or fall down which may
cause injury or damage.
12) Do not block the ventilation holes. Place the TV at least 10 cm away from the walls for
good air circulation. The inside of this TV will overheat if the ventilation holes are sealed,
which may result in a fire.
13) Take measures to prevent the TV from falling over. If not, the TV may lean or fall over and
cause an injury. When moving, watch out for the ties.
14) Avoid placing the TV in direct sunshine, near a heating source or places with a high
temperature, such as in a closed car. A fire may result when the inside temperature
increases.
15) Also avoid the placing the TV on dusty or damp places. This may cause a fire or electric
shock.
16) Set up the outdoor antenna away from high ways, power lines and neon signs. If the
antenna falls down or drops, it may cause injury or electric shock accidents.
The antenna should be checked and replaced periodically.
17) Do not jolt the TV, resulting in the TV falling over, dropping or causing an injury.
18) Keep magnets, electric clocks, speakers, etc. away from the TV.
19) Do not spray volatile compounds such as insecticide on the cabinet. This may cause a
discoloration or damage of the cabinet.
Notes on cleaning
20) Before cleaning, unplug the power cord.
Clean the cabinet with a soft and dry cloth.
Do not use benzine, thinner, etc. to clean the TV.
21) Sometimes disconnect the power plug from the outlet and check it.
If dust has collected on the power plug connectors, clean off the dust.
SAFETY INSTRUCTIONS AND MAINTENANCE (continued)
12) 14)
16) 20) 21)
13)
Sturdy tie
Not lean
and
protrude
EN-01-20[29CZ5DE/29CZ6DA/TES]-1 23/9/05, 9:25 AM3

4
TABLE OF CONTENTS
GETTING STARTED .................................................................................... 5
NAME AND FUNCTIONS OF CONTROLS ................................................. 6
TV Front and Remote control ................................................................ 6
MENU FUNCTION ....................................................................................... 7
Menu display chart .................................................................................7
BASIC OPERATIONS .................................................................................. 8
To turn TV on/off.....................................................................................8
Selecting the channels ...........................................................................8
Selecting the menu language................................................................8
To display on-screen information ......................................................... 8
To activate Blue screen ..........................................................................8
PICTURE AND SOUND ADJUSTMENT ..................................................... 9
Color and Sound system........................................................................9
Picture quality adjustment .....................................................................9
Sound quality adjustment....................................................................10
Stereo/ Bilingual selection ...................................................................11
TIMER SETTING ........................................................................................ 12
Setting the Timer .................................................................................. 12
CHANNEL PRESET .................................................................................... 13
Presetting channel ................................................................................13
VIEWING TELETEXT ................................................................................. 15
Teletext control functions .................................................................... 15
Fast / List Mode .....................................................................................16
Double Window Teletext......................................................................17
EXTERNAL EQUIPMENT CONNECTIONS ............................................. 18
TROUBLESHOOTING................................................................................ 19
SPECIFICATIONS ........................................................................ Back Cover
Exemptions
9Toshiba is not liable for any damage caused by natural disaster (such as thunder,
earthquake),fire, acts by third parties, accidents, misuse, or uses in other improper
conditions.
9Toshiba is not liable for incidental damages (such as profit loss or interruption in business,
modification or erasure of record data, etc.) caused by use or inability to use of product.
9Toshiba is not liable for any damage caused by neglect of the instructions described in the
owner’s manual.
9Toshiba is not liable for any damage caused by misuse or malfunction through simultaneous
use of this product and the connected equipment.
EN-01-20[29CZ5DE/29CZ6DA/TES]-1 23/9/05, 9:25 AM4

5
VHF UHF
Mixer
Outdoor
antenna
300-ohm twin-lead feeder with
optional antenna adapter
75-ohm coaxial cable
or
1Connect the antenna to at the
rear of the TV.
Connect the power cord to an
electrical outlet with standard
household power within the range
of ~110-240V, 50/60Hz.
Notes
•Do not connect the power cord until all
your equipments have been connected.
•The antenna cables should not be
bundled with the power cord and the like.
Insert the batteries into the remote
control.
Requires two R03
(AAA) batteries
+
--
+
Operating range
R
e
m
ote
se
n
sor
5m
•If the remote control does not operate
correctly, if the operating range becomes
reduced, replace both batteries with
new ones.
•When the remote control will not used for
a long period of time or when the batteries
are worn out, remove the batteries to
prevent leakage.
•Do not drop, dampen or disassemble the
remote control.
Cautions
•Do not dispose batteries into fire. Dispose
batteries into the designated disposal areas
according to the local regulations.
•Do not mix battery types or combine used
batteries with new ones.
2
3
4
5
6
GETTING STARTED
Push the (Power switch) until it
clicks to turn on the power.
Refer to page 8 for details on power on and off.
Preset the channels automatically
(ASM function).
Use remote control for this operation. The
buttons on the TV with similar name may also
be use.
1Select the starting position for channel
to be preset. Press the Number buttons
(-/--, 0~9) or CH s/t.
1
2Set the correct broadcast system for
your region. Press MENU and then ;
-/+
to highlight the “SET UP”icon.
Confirm “COLOR MODE”is set to “AUTO”
and “SOUND MODE”is set to proper
system. (Refer to the table on page 9.) If
not, press CH s/tto select “COLOR
MODE”or “SOUND MODE, press ; -/+
and then CH s/t to set each proper
system.
3Press MENU and then ;
-/+ to highlight
the “TUNING”icon. Select “ASM”,
then press ;
+ to start the search. When
the TV screen returns to the start position,
the procedure is complete.
TUNING
MFT
AFT
ASM
SEARCH
POSITION
MEMORY
P001
OFF
CH
CH
MENU
SELECT / ADJUST –/+ BACK
Press ; -/+ to adjust the sound
volume.
SETUP
LANGUAGE
COLOR MODE
SOUND MODE
SKIP
BLUE SCREEN
TEXT
ON
FAST
AUTO
OFF
B/G
ENGLISH
MENU
SELECT / MENU –/+ BACK
EN-01-20[29CZ5DE/29CZ6DA/TES]-1 23/9/05, 9:26 AM5

6
Note: The shaded button is not available for 29CZ6TES. If you press the button, “MODE NOT
AVAILABLE”will appear on the screen.
TV Remote Control
1 f Power on/standby [8]
2 o Sound Mute, press
again or
; -/+ to
restore the sound.
3
0~9 Number buttons [8]
4
a Input source selection
[18],
Timer-ON position
setting [12]
Switch the active
teletext page of the
double window mode
[17]
5
MENU Turn on menu display
[7]
6
CH s/t Channel up/down [8],
Menu item selection [7]
7
8 Sound menu [10]
8
CALL/i On-screen on/off [8],
Turn off the menu [8],
Teletext initial/index [15]
9Teletext colored buttons
Red/Green/Yellow/Blue
[16]
0 mI/II Stereo/bilingual
selection [11]
Only available for
29CZ5DE and 29CZ6DA.
-Double-window on/off
[17]
=
-/-- Digit selection [8]
~
; -/+ Volume down/up [5],
Menu selection or
item adjust [7]
!Picture menu [9]
@
TXT/TV Teletext/TV selection
[15]
#Teletext functions [15]
y/X –Time display, To select
a page while viewing a
normal picture
^ –To enlarge teletext
display size
? –To reveal concealed
text
v –To hold a wanted page
1
2
3
4
5
6
7
8
9
!
"
#
$
%
&
(
a
ef
hc
b
g
i
jd
Open the lid
NAMES AND FUNCTIONS OF CONTROLS
For details on the use of each control, refer to the page numbers in [ ] brackets.
TV Front and Remote control
aqMain power on/off [8]
bRemote sensor [5]
cqPower indicator (red) [8]
rTimer-ON indicator
(green) [12]
dMENU Turn on menu display
[7]
eaInput source selection
[18]
f- ; +Volume down/up [5],
Menu selection or item
adjust [7]
gtcsChannel down/up [8],
Menu item selection
[7]
hLStereo headphones jack
(Ø3.5mm) for private
listening. The sound
from the speakers will
be cut off automatically.
i AUDIO Audio input terminals
[18]
j VIDEO Video input terminal
[18]
EN-01-20[29CZ5DE/29CZ6DA/TES]-1 23/9/05, 9:26 AM6

7
Notes
•If you do not make a selection within 15 seconds, the menu display disappears automatically.
•To return to the previous menu, press MENU.
•The area on the SOUND, SET UP and TUNING menu display does not appear when video
input source is selected.
•MTS MODE will not display on the SOUND menu for 29CZ6TES model.
MENU FUNCTION
•Before watching the TV, please familiarize yourself the method to use the menu function of
this TV.
•Instructions in this manual are based on using the remote control.
Press the MENU to display menu, then press the ;
-/+ to select menu.
Press the CH s/tto select an item and then press the ;
-/+ to select or adjust setting.
•This manual shows the On-Screen Display of 29CZ5DE model.
Menu display chart
CONTRAST
100
BACK
MENU
ON
SOUND
MODE
BASS
BALANCE
TREBLE
EQUALIZER
MTS MODE
INTELLIGENT SOUND
MEMORY
00
00
00
( + )
AUTO
TUNING
MFT
AFT
ASM
SEARCH
POSITION
MEMORY
P002
OFF
SEARCH VHF L P002
STOP
TUNING
MFT
AFT
ASM
SEARCH
POSITION
MEMORY
P002
OFF
SETUP
LANGUAGE
COLOR MODE
SOUND MODE
SKIP
BLUE SCREEN
TEXT
ON
FAST
AUTO
OFF
B/G
ENGLISH
SETUP
LANGUAGE
COLOR MODE
SOUND MODE
SKIP
BLUE SCREEN
TEXT
ON
FAST
AUTO
OFF
B/G
ENGLISH
PICTURE
MODE
CONTRAST
BRIGHTNESS
COLOR
TINT 00
00
50
50
100
DYNAMIC
SHARPNESS
INTELLIGENT PICTURE
ON
PICTURE
MODE
CONTRAST
BRIGHTNESS
COLOR
TINT 00
00
50
50
100
DYNAMIC
SHARPNESS
INTELLIGENT PICTURE
ON
ON
SOUND
MODE
BASS
BALANCE
TREBLE
EQUALIZER
MTS MODE
INTELLIGENT SOUND
MEMORY
00
00
00
AUTO
BASS
00
BACK
MENU
TIMER
TIMER
MENU
SELECT / ADJUST –/+ BACK
MENU
SELECT / ADJUST –/+ BACK
MENU
SELECT / ADJUST –/+ BACK
MENU
SELECT / ADJUST –/+ BACK
MENU
SELECT / ADJUST –/+ BACK
MENU
SELECT / MENU –/+ BACK
MENU
SELECT / MENU –/+ BACK
MENU
SELECT / MENU –/+ BACK
MENU
SELECT / MENU –/+ BACK
MENU
SELECT / MENU –/+ BACK
TIMER ON 00:00 P001
TIMER OFF 00:00 TIMER ON 00:53 P001
TIMER OFF 00:00
EN-01-20[29CZ5DE/29CZ6DA/TES]-1 23/9/05, 9:27 AM7

8
To turn TV on/off
1Press the qpower switch on the TV. The q
red power indicator lights up.
2If no picture appears, it is in the standby mode,
press the fbutton on the remote control.
Notes
•You can also turn on the TV by pressing
one of the Number buttons (0~9) on the
remote control instead of the fbutton.
By pressing the number (one digit only)
where the channel you want to watch is
preset, you can turn on the TV and
channel selection at the same time.
•When the remote control is not at hand,
you can turn on the TV by pressing the
a, -; + or tcsbutton on the TV.
3To switch to the standby mode, press the
fbutton.
4To turn off the main power, press the q
power switch.
Auto Power Off
The TV will automatically turn itself off after
about 15 minutes if it is tuned to a vacant
channel, TV broadcasts for a day are finished,
or the signal is interrupted for any reason. This
feature does not work in video input mode.
Selecting the channels
•Press the -/-- button to select the input digit
of position number and then press 0~9 to
select the number. (e.g., for 25, press -/-- to
display “--”, then 2and 5)
25 --
•Press tto select lower position number, sto
select higher ones.
Note
When a TV channel with teletext service is
selected, a black bar with channel indication will
display on the screen for a second. However,
abnormal indication may appear depending on
the received signal. This is not a malfunction of
the TV.
Selecting the menu language
Choose from five different languages (English,
Mandarin, Malay, Vietnamese and Thai), select
to display all on-screen Menus in your language
of choice.
1Press MENU and then ;
-/+ to highlight the
“SETUP”icon.
2Press CH s/tto select “LANGUAGE”, then
press ; -/+ to enter to LANGUAGE menu
mode.
3Press CH s/tand then ;
-/+ to select the
desired language.
SETUP
LANGUAGE
COLOR MODE
SOUND MODE
SKIP
BLUE SCREEN
TEXT
ON
FAST
AUTO
OFF
D/K
ENGLISH
LANGUAGE
ENGLISH
MELAYU
MENU
SELECT / ADJUST –/+ BACK
MENU
SELECT / ADJUST –/+ BACK
To display on-screen information
Press CALL/ i to display the position number
or video input mode selected (A1, A2, DVD
or A3) and the Mono/Stereo/Bilingual*
audio status. To erase the display, press
CALL/
iagain.
25
(*Mono/Stereo/Bilingual symbol only appears
on 29CZ5DE and 29CZ6DA model)
The CALL/
ibutton can also be used to erase
the on-screen menu display.
To activate Blue screen
With the blue screen function ON, the TV screen
will automatically turn blue and the sound will
be muted when no TV signal is received.
1Press MENU and then ;
-/+ to highlight
the “SETUP”icon.
2Press CH s/tto select “BLUE SCREEN”,
then press ;
-/+ to set ON or OFF.
Position number or
video input mode
Mono/Stereo/Bilingual
audio status*
BASIC OPERATIONS
EN-01-20[29CZ5DE/29CZ6DA/TES]-1 23/9/05, 9:27 AM8

9
Color and Sound system
If the color or sound of a certain channel
is abnormal
The color or sound system setting may be incorrect.
Press MENU and then ;
-/+ to highlight the
“SETUP”icon.
Press CH s/tto select the following items:
COLOR MODE system setting
Press ; -/+ to enter COLOR MODE selection.
Press CH s/tand then ;
-/+ to select the
appropriate color system. AUTO, PAL, SECAM,
NTSC4.43 or NTSC3.58 can be selected.
SOUND MODE system setting
If the picture or sound is abnormal when
receiving programs through the (antenna)
terminal, the sound system setting may be
incorrect. Press ;
-/+ to enter SOUND MODE
selection. Press CH s/t and then ;
-/+ to
select the appropriate sound system according
to the broadcast system of your region.
Refer to the table below. B/G, I, D/K or M can
be selected.
Picture quality adjustment
To access the PICTURE menu
Press for direct selection or press MENU and
then ;
-/+ to highlight the “PICTURE”icon.
Press CH s/tto select the following items:
MODE (Preset picture mode)
Four preset picture modes can be selected.
Press ;
-/+ to enter MODE selection. Press
CH s/t and then ;
-/+ to select the desired
picture mode.
DYNAMIC select for a bright and dynamic
picture
STANDARD select for standard picture
settings
MILD select to display a softer picture
MEMORY select for a picture quality set
according to your preferences
Broadcast Transmission Systems in Each Country or Region
Area Country or Region System
Color Sound
Bahrain, Kuwait, Israel, Oman, Qatar, United Arab
Emirates, Yemen, and other middle Eastern countries. PAL B/G
Indonesia, Malaysia, Singapore, Thailand, and other
Southeast Asian Countries.
Asia China PAL D/K
M. E. China Hong Kong PAL I
Iraq, Islamic Republic of Iran, Lebanon, Saudi Arabia SECAM B/G
Russian Federation SECAM D/K
Myanmar NTSC M
Oceania Australia, New Zealand PAL B/G
Africa Republic of South Africa PAL I
South Argentina, Paraguay, Uruguay PAL N
America Brazil PAL M
Chile, Colombia NTSC M
PICTURE AND SOUND ADJUSTMENT
SETUP
LANGUAGE
COLOR MODE
SOUND MODE
SKIP
BLUE SCREEN
TEXT
ON
FAST
AUTO
OFF
D/K
ENGLISH
MENU
SELECT / MENU –/+ BACK
PICTURE
MODE
CONTRAST
BRIGHTNESS
COLOR
TINT 00
00
50
50
100
DYNAMIC
SHARPNESS
INTELLIGENT PICTURE
ON
MENU
SELECT / MENU –/+ BACK
EN-01-20[29CZ5DE/29CZ6DA/TES]-1 23/9/05, 9:27 AM9

10
Sound quality adjustment
To access the SOUND menu
Press 8for direct selection or press MENU and
then ;
-/+ to highlight the “SOUND”icon.
ON
SOUND
MODE
BASS
BALANCE
TREBLE
EQUALIZER
MTS MODE
INTELLIGENT SOUND
MEMORY
00
00
00
AUTO
MENU
SELECT / MENU –/+ BACK
Press CH s/tto select the following items:
MODE (Preset sound mode)
Three preset sound modes can be selected.
Press ;
-/+ to enter MODE selection. Press
CH
s/tand then ; -/+ to select desired
sound mode.
THEATER select for playing music and
movie
NEWS select to emphasize human voice
MEMORY select for a sound quality set
according to your preferences
BASS Adjust to increase or decrease
lower-pitched sound with
+ or - respectively.
TREBLE Adjust to increase or decrease
higher-pitched sound with
+ or - respectively.
BALANCE Adjust to decrease left or right
speaker balance with + or -
respectively. This adjusted
condition is not stored in the
Memory mode.
EQUALIZER Press ; -/+ to enter EQUALIZER
menu mode. A total of 5
equalizer bands can be adjusted
according to your preference.
CONTRAST Adjust to increase or decrease
the picture contrast with + or -
respectively.
BRIGHTNESS Adjust to brighten or
darken the picture with + or -
respectively.
COLOR Adjust to increase or decrease
the color intensity with + or -
respectively.
TINT Adjust the picture to be more
greenish or more purplish
with + or - respectively. This
effect is provided for NTSC
system only.
SHARPNESS Adjust to sharpen or soften the
picture with + or - respectively.
INTELLIGENT PICTURE
The Intelligent picture mode
equipped with Black/White/
Blue stretch feature. It enable
a maximum of visible details
in the darker parts of the
picture and over the whole
range of luminance. A brighter
and sharper impression of the
picture is percepted.
Press ;
-/+ to set “ON”or
“OFF”.
Notes
•Any adjustment of the BRIGHTNESS,
CONTRAST, COLOR, TINT or SHARPNESS
settings will be stored in the MEMORY mode.
•If you adjust any one of items: BRIGHTNESS,
CONTRAST, COLOR, TINT or SHARPNESS in
the DYNAMIC, STANDARD or MILD modes,
the TV will automatically change to the
MEMORY mode.
PICTURE AND SOUND ADJUSTMENT (continued)
EQUALIZER
00 DB
100HZ 00 DB
300HZ
00 DB
3KHZ 00 DB
8KHZ
+02 DB
1KHZ
MENU
SELECT / ADJUST –/+ BACK
EN-01-20[29CZ5DE/29CZ6DA/TES]-1 23/9/05, 9:27 AM10