Toshiba CX32H60 User manual

}6H60

SAFETY PRECAUTIONS
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
WARNING
WARNING: TO REDUCE THE RiSK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK), NO USER-
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
//_,_ The rightning symbol in the triangle tells you that the
voltage inside this product may be strong enough to
cause an electric shock, DO NOTTRYTO SERVICE
THIS PRODUCT YOURSELF.
/The exclamationmark inthe triangletells youthat
importantoperatingand maintenanceinstructions
/•\ follow this symbol.
CAUTIONS
TO PREVENT ELECTRIC SHOCK, DO NOT USETHIS
POLARIZED PLUG WITH AN EXTENSION CORD RECEP-
TACLE OR OTHER OUTLET UNLESS THE PRONGS CAN BE
FULLY iNSERTED INTO THE OUTLET TO PREVENT ANY
EXPOSURE OF THE PRONGS ON THE POLARIZED PLUG.
PRECAUCIONES
PARA EVITARDESCARGAS ELI_CTRICAS,NO UTILICE
ESTEENCHUFE POLARIZADO CON UN RECEPTJiCULO
DE CABLE DE EXTENSION UOTRA TOMA SALVO QUE
LA CLAVIJAESTt_COMPLETAMENTE LNSERTADAEN LA
TOMA PARA EVITARCUALQUIER EXPOSICION DE LOS
VfiISTAGOS DELENCHUFE POLARIZADO.
WARNING
To avoid personal injury:
•Do not stand or dimb on the TM.
•Do not put a VCR or any heavy object on top of the TM.
ADVERTENCIA
Para evitar dafios personales:
•No se ponga de pie en elTV ni suba ad[.
• No coloque el vfdeo (p. ej.VCR) ni otro objeto pesado en la parte
superior del TV.
Avoid displaying stationary" images on your TV screen for extended
periods of time. Stationary patterns generated by a picture-in-
picture (PIP) display, computer displays, video games, stock market
reports, etc., can become permanently engrained on the picture
tube. This damage is not protected by your warranty because it is
the result of misuse. If you wish to use your TV to display still
images, reduce brightness and contrast settings. Never leave a PIP,
computer, or video game display unattended.
This TV set may be used with the Toshiba stand listed on page 28. Use
with other stands may result in instability', causing possible injury.
Note to CATVsystem installers in the USA
This reminder is provided to call the CATV system installer's
attention to Article 820-40 of the NEC, which provides guidelines
for proper grounding, and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building,
asclose to the point of cable entry"as practical.
IM PORTANT SAFETY
INSTRUCTIONS
INSTRUCCIONES DE
SEGURIDAD
CAUTION
PLEASE READ AND OBSERVE ALL WARNINGS AND
INSTRUCTIONS CONTAINED IN THIS SECTION AND
THOSE ON YOUR "PvrSET.
RETAIN THIS SECTION FOR REFERENCE.
PRECAUCION
LEA YTENGA EN CUENTA TODAS LAS ADVERTENCIAS E
INSTRUCCIONES QUE SE ENCUENTRAN EN ESTE
PANFLETO Y LAS DE LOS APARATOS DE TELEVISION.
MANTENGA ESTE PANFLETO PARA FUTURAS
REFERENCIAS.
ElectricaI energy can perform many useful functions. This TV set has
been engineered and manufactured to assure your personal safety.
However, improper use can result in potential electrical shock or fire
hazards. In order not to defeat the safeguards incorporated in this TV
set, observe the following basic rules for antenna/'lW installation, use
and seix,icing.
Do not remove the cabinet cover. This may expose you to dangerous
voltages. Refer all servicing to qualified service personnel.
La energla el&tricapuede tealizar funciones muy 6.tiles. Este tdevisor
ha side disefiado y fabricado para asegurar su seguridad personal. Sin
embargo, la utilizaci6n inadecuada del mismo puede resuhar en
descargas eldctricas o en el riesgo de incendios. Para no anular Ins
protecciones incorporadas en este televisor, tenga en cuenta las reglas
b_sicas de instaladdn de la antena/televisor, y en caso de proplema_s
p6ngase en contacto con un centro de reparaciones.
No extraiga de la cuMerta de la caja. Esto podr_a dejarle expuesto a
tensiones peligrosas. En caso de averia, consulte los servicios de
personal cualificado.
INSTALLATION /INSTALACI_N
Power Sources -- The 'D,1 set shouid be operated only from the type of
power source indicated on the TV set or as indicated in the Owner's
Manual. If you are not sure of the type of power supply in your home,
consult your sales person or your local power company. For TV sets
designed to operate from battery power, refer to the operating
instructions.
Fuentes de alimentaci6n -- Este televisor solamente deber:i alimentarse
con la fuente de alimentaci6n indicada en la etiqueta de caracterfsticas.
Si no esth seguro del tipo de fuente de alimentacidn de su hogar,
consulte al proveedor de su televisor o a la compafiia el6ctrica local.
Para productos destinados a alimentarse con pilas, u otras fuentes,
consulte Ins instrucciones de operaci6n.
Grounding or Polarization -- The TV set is equipped with one of the
following type plugs. If the plug should fail to fit the power oudet,
contact your electrician to replace your obsolete outlet. DO NOT
defeat the safety purpose of the type plug on the "IV set.
Puesta a tlerra opolarizad6n -- Esre televisor puede poseer un enchufe
de los tipos siguineres. Sid enchufe no entra en latoma de la red, p6ngase
en contacto con un dectridsta para que le cambie la toma azlticuada. NO
anule el fin de seguirdad de sere tipo de enchufe dd televisor.

Apolarized ahernating current linep[ug-- having one blade wider than
the other. This plug will fit into the power outlet only one way, If you
are unable to insert the plug into the outlet, try reversing the plug.
Un enchufe de linen de corriente Mterna polarizado -- posee una cuchilh
mils ancha que la otra. Este enchufe entrar_, en la toma de la red de una
sola fotma. Si no puede inertar el enchufe en la toma de la red, trate de
inverfirlo.
Alternate sgthrnings -- Athree-wire grounding-type plug -- a plug
having a third (grounding) pin. This plug will only fit into grounding-
type power outlet.
Advertendas ahernatiwas -- Enchufe de tippo puesta a tierra de tres
conductores -- enchufe que posee un tereer terminal (de puesta a
tierra). Este enchufe solamente encajarfi en una toma de la red de tipo
puesta a tierra.
Water and Moisture -- Do not use the TV set near water -- for
example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a
wet basement; or near a swimming pool; and the like.
Agua y humedad -- No utilice el televisor terra del agua -- pot
ejemplo, cerca de una bafiera, un lavabo, un fregadero, una hvadora, en
un s6tano hfimedo, cerca de una piscina, ni lugares pot e! estilo.
Ventilation -- The slots and openings in the cabinet and in the back or
bottom are provided for necessary" ventilation. Never block or cover
these slots and openings to ensure reliable operation of the TV set and
to protect it from overheating.
Ventilaci6n -- Las ranuras y aberturas de ia caia y de la parre posterior
o de la base son para proporcionar la ventilacirn necesaria. Part
asegurar la operaci6n fiable del televisor para proregerlo contra el
recalentamiento. No bloquee ni cubra nunca estas ranuras y aberturas,
a. Never cover the slots and openings with a doth or other materials.
a. No cubra nunca [as ranuras ni las abertutas con patios ni otros
materiales.
b. Never block the slots and openings by placing the TV set on abed,
sofa, tug or other similar surface.
b. No blocluee nunca las ranuras ni las aberturas colocando el televisor
sobre una cama, un sof_, una alfombra, ni dem_ superficies similares.
c. Never place the TV set in aconfined space such as a bookcase, built-
ia cabinet, or any other place of poor ventilation.
c. No coloque nunca el televisor en un espacio cubierto, como una
librerfa o un estante empotrados, nien un lu_r de mala ventilaci6n.
Heat -- Do not place the TV set near or over a radiator or heat
register, or where it is exposed to direct sunlight.
Calor -- No coloclue el televisor cerca ni sohre un radiador ni un
registro de talon, ni expuesto a la luz solar directa.
Power-Cord Protection -- Do not allow anything to rest on or roll
over the power cord, and do not place the TV set where the power cord
is subject to wear or abuse_
Proteceirn del cable de alimentaci6n -- No eoloque ni pase sobre el
cable de alimentacirn, ni eoloque el telivisor donde su cable de
alimentaci6n pueda sufir cualquier dpo de datios.
Accessories -- Do not place the TV set on an unstable cart, stand,
tripod, bracket, or table. The TV set may fall, causing serious injury to
a child or adult, and serious damage to the TV set. Use only with a cart,
stand, tripod, bracket, or table recommended by the manufacturer, or
sold with the TV set, and should use a mounting accessory recom-
mended by the manufacturer.
Accesorios -- No coloque el televisor sobre un carrito, una base, un
tripode, un soporte ni una mesea inestable. E1 televisor podria caerse,
causando serios datios a nltios o aduhos, o al propio televisor. Utilice
solamente e{ carrito, {a b_se, el trfpode, el soporre, o la mesa que
recomiende el fabricante, o que se venda con el televisor, y utilice un
accesorio de montaje recomendado por ei fabricante.
A product and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the product
and cart combination to overturn.
La combinaci6n de un producto y
un carrito deber.4 moverse con
cuidado. Las paradas mpentinas,
la fiaerza e_xcesiva, y las superficies
desiguales pondrlan hacer que
volcase la combinaci6n del carrito
ydel producto.
USE IUTILIZACII(_N
Overloading -- Do not overload wall outlets, extension cords or
convenience receptacles beyond their opacity, since this can resuk in
fire or electric shock.
Sobrecarga -- No sobrecargue Ins mmas de la red, los cables
ptolongadores, ni los adaptadores para mfiltiples tomas, ya que esto
supondrla el riesgo de incendios o de descargas eidctricas.
During lightning storms, or when the "IV set will be left unattended
and unused for a long period of time, unplug the power cord from the
wall outlet and disconnect the antenna or cable system. This will
prevent damage to the TV set due to lightning and power-line surges.
Durante tormentas el&tricas, o cuando no vaya a utilizar el televisor
durante mucho tiempo, desenchufe el cable de alimentaci6n de la toma
de la red y desconecte la antena o el sistema de cablevisi6n. Esto evitarfi
que se dafie el televisor debido a rayos y a sobretensiones repentinas en
la red.
Object and Liquid Entry -- Never push objecrs of any kind into the
"IV set through the cabinet slots as they, may" touch dangerous voltage
points or short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the TV set.
Entrada de objetos y l_quidos -- No introduzca nunca obietos de
ningrn tipo en este televisor a travrs de las aberturas, ya que podrian
tocar puntos de teusi6n peJigrosa o cortocircuitar piezas, 1o que podda
resukar en incendio o descarga eldctrica, No vierta nunca liquidos de
ning6n tipo sobre este televisor.
Cleaning -- Unplug the TV set from the wall outlet before cleaning or
polishing it, Do not use liquid cleaners or aerosol cleaners. Use a doth
lightly dampened with water for cleaning the exterior of the TV set.
Limpieza --Desenchufe el televisor de [a toma de la red antes de
limpiarlo. No utilice limpiadores lfquidos ni aerosoles. Para limpiar e!
exterior del televisor, utilice un patio ligeramente humedecido en agua.
Attachments -- Never add accessories that ha'_e not been specifically
designed for the TV set. Never remodel the "IW set by yourself as this
can result in a fire hazard or electric shock.
Adimmentos -- No utilice aditamentos no recomendados por el
fabricante del televisor, ya que podrlan suponer un pefigro. No
remode[e nunca el televisor usted mismo, ya que esto podrla causar el
riesgo de incendios odescargas el&tricas.
Ifa snapping or popping sound from a TV set is heard continuously or
frequently while the TV set is operated, unplug the TV set and consult
your dealer or service technician. It is normal for someTV sets to make
occas!onal snapping or popping sounds, particularly when being turned
on or O_
Si se oye un sonido seco de un televisor continuo ofrecuente mientras
el televisor estd fimcionando, desenchffelo y consuhe a su proveedor o
a un tdcnico de servicio. Es normal clue algunos televisores produzcan
sonidos secos, particularmente cuando conecte o desconecte su .
alimentaci6n.
iii

SERVICE /SERVICIO DE REPARACION
Damage Requiring Service -- Unplug the TV set from the wall outlet
and refer se_'idng to qualified service personnel under the following
conditions:
Dafios que requieren el servicio de reparaci6n -- En !os casos
siguientes, desenehufe el televisor de la voma de la red ysolicite Ios
servidos de personal de reparaci6n especializado:
a. When the power cord or plug is damaged or frayed.
a. Cuando se haya dafiado el cable de aiimentaci6n o el enchufe.
b. When liquid has been spilled ioto the TV set.
b. Cuando se haya vcrtido l_quido dentro dd televisor.
c. When the TV set has been exposed to rain or water.
e. Cuando e! televisor haya estado expuesto a la Uuvia oal agua.
d. When the TV set has been subject to excessive shock by being
dropped, or the cabinet has been damaged.
d. Cuando el televisor baya estado expuesto a golpes excesivos o haya
cafdo, o su caja se haya dafiado.
e. When the TV set does not operate norma!iy even though you follow
the operating instructions. Adjust only those controls that are
specified in the operating instructions. Improper adjustment of
other controls may result in damage and wilt often require extensive
work by a qualified technician to restore the "IV ser to normal
operation.
When the TV set exhibits a distinct change in performance. This
indicates a need for service.
e. Cuando el televisor no funcione normalmeI:te incluso al seguir las
instrucciones de operaci6n. Ajuste soiamente los controles indicados
en las instrucciones de operacidn, ya que nn ajuste inadecuado de
otros controles podria resukar en dafios y a menudo requerirfin un
trabajo dif¢cil por un t&nico cualificado pata devoiver el televisor a
su funcionamiento normal.
Cuando el funcionamiento dd televisor haya cambiado
notahlemente -- esto indica la necesidad del servicio de reparaddn.
Servicing- Do not attempt to service the TV set yourself. To open or
remove the covers may expose you to dangerous voltage or other
hazards. Refer allservicing to qualified service personnel.
Reparaei6n -- No intents nunca reparar d televisor por sf mismo. La
apertura o extraccidn de cubiertas podrfa exponerle a tensiones
peligrosas u otros peligros. En caso de aver_a solicite los servicios de
persona) de reparaci6n cualificado.
Replacement Parts -- When replacement parts are required, be sure
the service technician certifies in writing that he has used replacement
parts specified by the manufacturer that have the same characteristics as
the original parts. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
Reemplazo de piezas -- Cuando sea necesario reemplazar piezas,
cerci6rese de que el tdcnico de reparacidn utilice las piezas de reemplazo
especificadas por el fabricante u otras qne posean Ins mismas
caracterlsticas que las originales. Las substimciones no autorizadas
podrlan resukar en incendios, descargas el{ctricas, u otros peligros.
Safety Check -- Upon completion of any service or repairs to the TV
set, ask the service technidan to perform routine safety checks (as
specified by the manufacturer} to determine that theTV set is in safe
operating condition, and to so certify.
Comprobacidn de seguridad -- A1finalizar cualquier reparaci6n de
este televisor, soIicite al tdcnico de reparaci6n que reaIice las
comprobaciones de sguridad (especificadas pot el lubricants) para
determinar y eertificar si el producto se encuentra en Inscondiciones de
operaci6n apropiadas.
VChen :he TV set reaches the end of its useful life, improper disposal
couid result in a picture tube implosion. Ask a qualified service
technician to dispose of the TV set.
Cuando el televisor llegue a) final de su vida fill, si se deshace de dl de
forma iaapropiada, el tubo de imagen puede explotar. Cttando desee
deshacerse de un televisor, solicite este servieio a un t&nico de
reparaci6n especializado.
ANTENNA /ANTENA
Oittdoor Antenna Grounding -- If an outdoor antenna is installed,
follow the precautions below.
An outdoor antenna system shoutd not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where
it can come in contact with such power lines or circuits.
WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM,
EXTREME CARE SHOULD BE TAKEN TO KEEP FROM
CONTACTING SUCH POWER LINES OR CIRCUITS AS
CONTACT WITH THEM IS ALMOST INVARIABLY FATAL.
Be sure the antenna system is grounded so as to provide some
protection against voltage surges and built-up static charges. Section
810 of the National Electrical Code in the USA and Section 54 of the
Canadian Electrical Code in Canada provides information with respect
to proper grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of grounding
conductors, locadon of antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode.
Pnesta a tierra de la antena exterior -- Cuando instate una antena
exterior, tenga en cuenta Ins precauciones siguientes.
Un sistema de antena esterior no deber_i colocarse cerca de llneas de alta
tensidn ni otros circuitos de iiuminacidn o alimentacidn, ni donde
pueda entrar en contacto con tales lfneas o circnitos.
CUANDO INSTALE UN SISTEMA DE ANTENA EXTERIOR,
TENGA EXTREMADO CUIDADO PARA EVITAR QUE ENTRE
EN CONTACTO CON TALES LJNEAS DE ALIMENTACION O
C1RCUITOS, YA QUE TAL CONTACTO PODRIA RESULTAR
INVAP,IABLEMENTE FATAL.
Cerci6rese de que d sistema de antena est_ puesto a tierra a fin de que
proportions cierta proteeci6n eontra sobretensiones y cargas est_tieas.
La Secci6n 810 del Cddigo El&ttico National (NEC) de EE.UU. y la
Seecidn 54 del C6digo Eldcrrico Canadiense ofrecen informac6n con
respecto a la puesta a tierra adecuada de una unidad de descarga de
antena, el tamafio de los conductores de puesta a derra, la ubicaci6n de
la unidad de descarga de !a antena, la conexidn de los dectrodos de
puesta a tierra, y los requisitos de tales electrodos.
Antenna lead-in wire
anterla
Ground clamp Antenn_ discharge unit
(NEC Section 810-20)
puesta a tierr,_ ga de la antena
(Seccidr1810_20 del NEC)
E_ec|ric service
eq.uipment
Equipo del
suministro eJ_clrico
Grourd olamps
J_razaderas de
puesta a tierra
unding conductors
Sec-tion 810-2 !}
Con0uctores de puesba al[erra
(Secci6n 8!0-21 del NEC)
Power service groLlr!ding electroOe system
(NEC Art 250 Part H)
Sistema de electrlx_os de puesta a tierra del
servicio de suministro electrico
{fltrticulo 250, Fade H dei NEC}
_V

Welcome to Toshiba .............................................................................................................................. 1
Exploring your new TV ............................................................................................................................... 1
Selecting a location for the TV .................................................................................................................... 1
Connecting your W .............................. [................................................................................................. 2
Connecting a VCR ...................................................................................................................................... 2
Connecting a cable converter box ............... ................................................................................................. 3
Connecting a cable converter box and a VCR ............................................................................................. 3
Connecting a DVDlsatellite receiver and a VCR ......................................................................................... 4
Connecting a DVD with ColorStream TM and a VCR .................................................................................. 4
Connecting two VCRs ................................................................................................................................ 5
Connecting a camcorder .............................................................................................................................. 6
Connecting an audio amplifier .................................................................................................................... 6
Using the remote control ...................................................................................................................... 7
Preparing tile remote control for use ........................................................................................................... 7
Installing the remote control batteries ......................................................................................................... 7
Using the remote control with a VCR or a cable TV converter .................................................................... 7
Programming the remote control for use with a VCR or a cable TV converter ............................................. 8
VCR code table ...................................................................................................................................... 9
Cable TV converter code table ............................................................................................................ 10
Learning about the remote control ............................................................................................................ 11
Setting up your TV .............................................................................................................................. 12
Changing the on-screen display language .................................................................................................. 12
Selecting the antenna input ........................................................................................................................ 12
Using the ANT/VIDEO button .......................................................................................................... 12
Adding channels to the TV's memory ......................................................................................................... 13
Programming channels automatically ................................................................................................... 13
Adding and erasing channels manually ................................................................................................ 14
Changing channels ..................................................................................................................................... 14
Using the TV's features ...................................................................................................................... 15
Adjusting the channel settings .................................................................................................................... 15
Switching between two channels ......................................................................................................... 15
Programming your favorite channels ................................................................................................... 15
Locking channels ................................................................................................................................ 16
Labeling channels ................................................................................................................................. 18
Watching picture-in-picture (PIP) ............................................................................................................. 19
Switching the main and small pictures ................................................................................................ 20
Changing the position of the small picture .......................................................................................... 20
Freezing the small picture .................................................................................................................... 20

Adjustingthepicture.................................................................................................................................21
Adjustingthepicturequality...............................................................................................................21
Selecting the color temperature ........................................................................................................... 21
Adjusting the picture preferences ......................................................................................................... 22
Watching video input ................................................................................................................................. 22
Displaying on-screen information ............................................................................................................. 22
Setting the off-timer .................................................................................................................................. 22
Auto power off .......................................................................................................................................... 22
Using the closed caption feature ................................................................................................................ 23
Adjusting the sound .................................................................................................................................. 24
Muting the sound ............................................................................................................................... 24
Selecting stereo/SAP broadcasts ........................................................................................................... 24
Adjusting the sound quality ........................................................................................................ ......... 25
Using the surround sound feature ....................................................................................................... 25
Viewing the demonstration mode ............................................................................................................. 26
Understanding the last mode memory feature ............................................................................................ 26
Appendix ................................................................................................................................................ 27
Cleaning and care ....................................................................................................................................... 27
Troubleshooting ......................................................................................................................................... 27
Specifications ............................................................................................................................................. 28
Limited United States warranty ................................................................................................................. 29
Attention Canadian customers ............................................................................................................ 30
Index ....................................................................................................................................................... 31
vi

Welcome to Toshiba
Congratulations! You have purchased one of the finest color TVs on
the market. The goal of this manua_ is to guide you through setting
up and operating your Toshiba TV as quickly as possible. Please make
sure you've received the following items: TV, remote control,, batteries,
manual, registration card, and extended service plan literature. If you
did not receive all of the items, or any of the items are damaged or
broken, please contact your Toshiba dealer. In addition, you may need
to purchase other audio or video cables to connect your equipment.
See "Connecting your T"¢"on page 2 for more information.
Please read all the safety and operating instructions carefully before
you begin.
Exploring your new TV
You can operate your TV by using the buttons on the front panel or
the remote control. The back panel provides all the terminal connec-
tions you will need to connect other equipment to your TV.
t ! ,
-- - i
Menu AnWideo Volume Channel Power POWER
Enter Indicator
@@@
A_.I ou_ _wr-a
Selecting a location for the ]'V
•Place the TV on the floor or on a sturdy platform in a location
where light does not directly hit the screen.
• Place the TV far enough from the walls to allow proper ventila-
tion. Inadequate ventilation may cause overheating, which may
damage the
The model number and serial number are on the back of your TV.
Record these numbers in the spaces below. Refer to these numbers
whenever you communicate with your Toshiba dealer about this TV.
Modal number: CX32H60 or CX36H60
Serial number:
®®®
®®®
Q®®
®@@
Sr_L SOt_ F_
: , 32,
Caution:
Theplug has one prong wider than the other
and will fit onlyone wayinto astandard
electricaloutlet (120 voltAC, 60 Hz). ffthe
plug doesnot fit into the outlet, try turning it
around. If theplug stilldoes not fi_ the outlet
isprobably non-standardandmust be
replaced byaqualified electrician.Do not
tamper with the plug or try to force it
into a non-standard outlet.

Connecting your TV
If you haven't connected electronic equipment before, or you have
been frustrated in the past, you may wish to read this section. (Cables
are not supplied.)
• A coaxial cable is the standard cable that comes in from your
antenna or cable converter box. Coaxial cables use "F" connectors.
•Audio and video cables are usually color coded according to use:
yellow for video and red and white for audio. The red audio cable
is for the stereo right channel, and the white audio cable is for the
stereo (or mono) left channel. If you look at the rear panel of the
"IV, you wili see that the terminals are color coded in the same
manner as the cables.
• S-video cables provide better picture performance. S-video cables
can only be used with S-video compatible components.
• ColorStream TM cables come in sets of three and provide the best
picture performance. ColorStream cables can only be used with
ColorStream compatible components.
s-V_eo
cabfe
AN'_'NNA
Cc_x_4 ¢_de
AUDIO c_orstl_am
Cable Cabk_
Vl_l[o
Cable
Connecting a VCR
This connection allows you to watch local channels and video pro-
grams, play or record on the VCR while watching TV, and to record
from one channel while watching another channel.
You will need:
• one coaxial cable
• one pair of audio cables (only one cable for a mono VCR)
• one video cable
Caution:
Do not plug the TVin until you havefinished
connectingall ofyour equipment.
"IV
Cable Lead-in from Cable Box
or Antenna I
Al_r 175111
_Tq OUT _T-2
S_reoVCR
_; _v'VJ_ II _ _ svom
*tAUDJO r_ ItAUD_OII AOD,O
,!i......II.........
__ IN from ANT OLq" tO"IV
Caution:
ffusing amono VCR,connect L/Mono to
VCRAudio OUTusingonlyone audiocab&
ffyou have aS-VHS VCR,use the So-video
connectionsand removethe videocable.
Do not connect the videocable andthe
S-video cable to Video-7simultaneously.
2

Connecting a cable converter box
This connection allows you to watch cable and premium channels.
You should keep your TV selected to ANT-1 so that you can use the
TV features. When viewing premium channels, select ANT-2 and
tune the TV to channel 3 or 4 (whichever channel is vacant in your
area), then use the converter box to change channels.
You will need two coaxial cables.
From Cable
Connecting a cable converter box and a VCR
This connection allows you to watch and record basic and premium
cable channels, as well as watch videotapes. You should keep your TV
selected to ANT-1 so that you can use the TV's features. When
viewing premium channels or recording with the VCR, select ANT-2
and change the TV channel to 3 or 4 (whichever channel is vacant in
your area), then use the converter box to change channels.
You will need:
• three coaxial cables
•one pair of audio cables (only one cable for a mono VCR)
• one video cable
W From Cable
tereo VCR
I
kJ_T- 1 OUT ANT-2
-- DVD IN 0 1_
oo_o........ o_v,oEo,
iL o.o
ISV;DEO
v'i ° IN from ANT OUT toTV
J cH41_1
Note:
Whenyouuseaconverterboxwithyour
theremaybe featuresthatyoucannot
programusingtheremotecontrol,suchas
labelingchannels,lockingchannels,and
programmtngyourfavoritechannels.
Ca_ion:
Ifyou want torecord one channel while
watch'nganother channel,asplitter (not
included) must be added between the cable
andANT-1.Oneoutput of the spltttergoes to
ANT-! andthe second output is connected to
IN on the cable converter box.
Ifyou have amono VCR,connect L/Mono to
VCRAudio OUTusing onlyone audio cable.
if you have aS-VHS VCR,usethe S-video
connectionsand remove the video cable. Do
not connect the wdeo cable and the
S-video cable to Video-1simultaneously.
Whenyou usea converterbox with your TV
there may be featuresthatyou cannot
program usingthe remote control, suchas
labelingchannels,locking channels,and
programming your favoritechannels.
\__S
3

Connecting a DVD/satellite receiver and aVCR
This connection allows you to watch DVD/satellite, video and TV
programs. You can record from the DVDtsatellite receiver and TV, as
well as record one TV channel while watching another channel.
You will need:
• one coaxial cable
• three pairs of audio cables (only one cable for a mono VCR)
• two video cables
• one S-video cable
DVD tSatellite Receiver To Satellite
V_OEO
O_T Sale_ite IN s V_DEO
@@
"IV
tereo VCR
ANT (75Q) =)
!
ANT-1 _IT ANTo2
....
COLOF_ /I VIDEO i - ID 2VIDEO 1
STREAM, Y_#[_
_,_,b IMONO _C_O
IN _._ _ {] IN from ANT OUT to'IV
==
"E
Caution:
Youcan usea videocable insteadof the
S-wdeo cable,but the picture quality will
decrease,ffyou usea S-wdeocable between
the TVand DVD/satellite receiver,make the
audioconnectionson/)/and remove the video
connection.
Do not connect the videocable andthe
S-video cable to Video-1simultaneously.
Connecting a DVD with ColorStream TM and a VCR
This connection allows you to watch DVD, video or TV programs
and to record DVD or TV programs. You can record from one source
and watch a program from another source. Your TV is capable of using
ColorStream (color difference). Connecting your TV to a ColorStream
compatible DVD, such as a Toshiba DVD, can greatly enhance
picture quality and performance.
You will need:
•one coaxial cable
•three pairs of audio cables (only one cable for a mono VCR)
•two video cables
• one set of ColorStream video cables
4

To Anteana
DVD Player with ColorS_ream TM
_tereo VCR
Connecting two VCRs
This connection allows you to record from one VCR to another VCR
while watching a video program. You will also be able to record from
one TV channel while watching another channel.
You wilt need:
• one coaxial cable
•two pairs of audio cables (only two cables for mono VCRs)
• two video cables
Stereo VCR IPlayback ....o i o,o@ @
(@ @ j IN from ANT OUT to "rv
, _ O_LIT OH 3
if /..........
COLOR y..... i ioEo2 video1
_UT CPI 3
Caution:
Toplayfrom _heDVD, the DVD and TVmust
use Co/orStreamconnect_'ons.Torecordfrom
theDVD, the DVD and TVmust se/ectVideo.
Caution:
Do not connect one VCRto the output and
inputjacks on zheTV atthesame time. Ifyou
are usinga S-VHS VCR,use theS-video
connectionsand remove the wdeo cable. Do
not connec_the videocable and the S-video
cable to Video-1simultaneously.
f- _
S _-', J
T_._i:
_Z .....
/
€' _,,
I
7;5; _L
I
I
i
/
F_
5\. _j

Connecting a camcorder
This connection allows you to watch video materials recorded on a
camcorder.
You will need:
• one pair of audio cables
• one video cable
TV
Caution:
If you are usinga S-VHScamcorder with a
S-video output, connect th/sto the S-video
input on the TVandremovethe videocab/&
Do not connectthe videocable andthe
S-video cable to Video-l simultaneously
Connecting an audio amplifier
This connection allows you to use an audio amplifier to adjust the
audio level. This also allows you to use external speakers.
To control the audio, turn on tbeTV and the stereo amplifier.
You will need one pair of audio cables.
Audio Amplifier
To Cable, Cable Bo_
or Antenna
TV
C.o _VD I
AUDIOR
J# 9
@ @v,oE0
MONO L,tMONO

Using the remote control
Preparing the remote control for use
With the remote control, you can operate your TV, most VCR
models, and cable TV converters together, even if they are different
brands. If you will be using your TV with a Toshiba VCR, your
remote control is already programmed and ready to use. If you own
different brands of VCRs and/or converters, you first have to program
your remote control. (See "Programming the remote control for use
with a VCR or a cable TV converter" on page 8.)
Installing the remote control batteries
To install the batteries:
1. Slide the battery cover off of the back of the remote control.
III>o° I
2. Install two %A" size alkaline batteries. Match the + and -signs
on the batteries to the signs on the battery compartment.
o
O
3. Slide the battery cover back on to the remote control until the
lock snaps.
Using the remote control with a VCR or a cable
TV converter
To control a Toshiba VCR:
Set the TVICABLE/VCR switch to the VCR position. The
buttons shown to the right will then control the VCR. The rest
of the buttons will operate the TV as usual.
To control a cable TV converter:
Program the remote control to recognize the brand of your
converter (see "Programming the remote control for use with a
VCR or cable TV converter," page 8). The shaded buttons shown
on the right will control the cable TV converter.
Set the TViCABLE/VCR switch to the CABLE position.
Note:
Thisremote control'sfunctionsmay or may
not operateyour VCRor cable TVconverte_
Referto the owner's manualssupplted with
the equipment tosee which featuresare
available.In addition, the original controllers
may havefeaturesnot avaslableon this
remote control Ifyou would like tocontinue
to usethesefeatures,you may want touse
the originalremote control.
Caution:
•Disposeofyour batteriesin adesignated
disposalarea. Do not throwyour batteries
into a fire.
•Do not mixbattery_ypesor combine used
batterieswith new ones.
• Removedead batteriesimmediately to
prevent battery acidfrom leaking into the
batterycompartment.
•Ifyou do not intend to use the remote
control foralong time, remove the
batteries.
REC_J- MUTE i
@ ®
®®®
®@®
®®N
BEe _FAVCH TV,A_DEO --I
STILL SOURCE PiP
SLOW PAUSE HEW FF
-- POWER
_Channel
Number
-- Enter
-- Channel TA
TViCableNCR
TVNCR
Play
Stop
Record
Fast Forward
Rewind
Pause
Slow
/.---->
J
c_,J
'...____/
f--_
UL. I

Programming the remote control for use with a
VCR or a cable "IV converter
This remote control is pre-programmed to operate Toshiba VCRs. To
use VCRs or cable converters other than Toshiba models, you must
follow the steps below before you operate your remote control.
1. Refer to the "VCR code table" or "Cable TV converter code
table" on pages 9-10 to find the number that corresponds to the
brand name of your VCR or converter.
If more than one number is listed, try each one separately until
you find the one that works.
2. If you are reprogramming the remote control to operate your:
•VCR, set the TV!CABLE/VCR switch on the remote control
to VCR.
• cable converter, set the TV/CABLE/VCR switch on the
remote control to CABLE.
3. Hold down the RECALL button while using the Channel
Number buttons to enter the three-digit code number of your
brand of VCR or converter.
4. Point the remote control at the VCR or converter and press
POWER to test the code number.
If the VCR or converter turns on, you have entered the right
number.
If the VCR or converter does not respond to the remote control,
you may have entered the wrong number. Repeat steps I-4 with
another code number.
For future reference, write down the code numbers you used:
VCR code
Cable code
!
®
®
©
®
"_', Recall
@ -- POWER
® ®
® ®
® ® _o,a..e,
Number
CH RI'_
Note:
• Each timeyou replace the batteries,you
mustreprogram the remoZecontrol.
•Some newer VCRsarecapable of working
oneither of two remote codes.These
VCRshaveaswitch labeled "VCRI/VCR2."
ffyour VCRhas thiskindof switch, it may
not respond to anyof the code numbersfor
your VCRbrandname In thzscase,setthe
s_<_tchto the other position (VCRI or
VCR2)and reprogram the remote control
8

VCR code table
Brand name
Adventura
Aiko
Aiwa
Akai
Akiba
Alba
American High
, Amstrad
Anam
Anitech
ASA
Asha
Asuka
Audiovox
Baird
Basic Line
Beaumark
Ball & Howell
Blaupunkt
Bran&
Broksonic
Bush
Calix
Canon
Capehart
Carver
CCE
CGE
Cimline
Citizen
Clatronic
Colt
Condor
Craig
Crown
Curtis Mathes
Cybernex
Daewoo
Dansai
Daytron
De Graft
Decca
Dual
Dumont
Dynatech
Elcatech
Hectrohome
Electronic
E|ectrophonic
Emerex
Emerson
ESC
Ferguson
Code number
019
297
019
060,068,080,125,
261
091
039,228,297,314
054
019
181
091
056,100
259
056
056
019,123
039,09!,297
259
123
053,181
206
140,203,230,380
091,228,297
056
054
O39
100
091,297
019
091
O56,297
O39
091
039
056,066,091,259
091,297
054,079
259
039,064,065,297
091
039
061
019,100
06O
019,100,123,124
019
091
056
019
O56
051
019,021,056,062,
080,087,140,203,
227,228,230,231,
313,314,380
297
06O
Fidelity-
Finlandia
Finlux
Firstline
Fisher
Frontech
Fuji
Funai
Garrard
GE
GEC
General
Go Video
Goldstar
Goodmans
Gradiente
Graetz
Granada
Grandin
Grundig
Harley Davidson
HarmaniKardon
Harwood
Hem
Headquarter
HI-Q
Hinari
Hitachi
Hypson
Imperia!
Interfunk
ITT
ITV
JCL
Jensen
jvc
Kaisui
Kendo
Kenwood
KLH
Kodak
Korpe|
Leyco
LIwd
Loewe
Loewe Opta
Logik
Luxor
LXI
M-Electronic
Magnavox
019
100,123,129
019,061,100,123,
124
056,062,064,091,
228
065,066,073,085,
123
O39
052,054
0t9
019
054,079,084,221
100
071
251,298
037,056,057
019,039,056,081,
091,297
019
060,123
065,100,123
019,056,091
100
019
057,094
087,091
091
O65
066
091,227
019,060,061,084,
124,254
091
019
100
060,065,123,125
056,297
O54
060
027,060, O86
091
125,228
057,060,065,086
091
054,056
091
09t
019
056
100
091,259
062,065,123,125
O56
019
019,054,058,100,
129,/68
Magnin
Manesth
Marantz
Marta
Masushita
Matsui
MEI
memorex
Memphis
Metz
MGA
VIGN Technology
Minoita
Mitsubishi
Motorola
MTC
Multitech
Murphy
NEC
Neckermann
Nesco
Nikko
Noblex
Nokia
Nordmende
Oceanic
Olympus
Optimus
Optonica
Orion
Osaki
Otto Versand
Palladium
Panasonic
Penney
Pentax
Perdio
Philco
Philips
Phonola
Pitot
Pioneer
Portland
Profitronic
Proline
Protec
Pulsar
Pye
Quarter
Quartz
259
064,091
054,057,081,100
056
054
227,228,314
054
019,054,056,058,
065,066,067,123,
259
091
181
062,080
259
061,124
062,080,086,094,
100,192,233,261,
054,067
019,259
019,091
019
057,059,060,069,
086
100
o9i
056
259
060,065,123,125,
259
060
019
054
056,067
067,081
140,227,228,314
019,056,091
100
056,091
054,096,115,181,
244
054,056,057,059,
061,073,259
061,084,124
019
054
054,081,100,129
100
o56
086,100
039
259
o19
091
058
lO0
065
o65
[_--_
i,>_ (
s---_
i

Qvlasar
Quelle
Radio Shack
Radiola
Radix
Randex
RCA
RCA Unified
Realistic
Rex
Ricoh
Roadstar
Runco
Saba
Saisho
Salora
Samsung
Sanky
Sansni
Sanyo
SBR
Schauh Lorenz
_chneider
Scott
Sears
SEG
;EI
Seleco
Sentra
Sharp
5hintom
Shogtm
Siemens
Silva
Singer
Sinudyne
;ontec
Sony
STS
Sunstar
Sylvania
Symphonic
Tandy
Tashiko
Tatung
Teac
Technics
Teknika
054,096,115
100
019,056
100
O56
056
054,061,079,084,
096,115,124,125,
168,221
079
019,054,056,065,
066,067,081,085,
123,259
060
053
056,091,259,297
058
060
227,228
062,065,125
064,259
058,067
060,086
065,066,123,259
100
019,060
019,091,100,129
062,064,140,203,
229,230,231
054,056,061,065,
066,073,085,123,
124
259
!00
060
O39
067,081
091
259
056,123
056
091
100
056
051,052,053,054
061
019
019,054,062, 100,
129
019
019,123
019
019,060, I00
019,060
054,181
019,054,056,071
Teleavia
Telefunken
Tenosal
Tensai
Thomson
Thorn
TMK
Toshiba
Totevision
Triumph
Unitech
Universum
Vector
Vector Research
Victor
Video Concepts
Videosonic
VC_ards
,XR-1000
L_amaha
Yamishi
Yokart
Yoko
Zenith
060
060,206
091
019
060
060,123
227,259
060,062,064,085,
229,231,385
056,259
227
259
019,056,068,100,
125
064
057,059
027,060,086
059,064,080
259
019,054,061,066,
067,081,091,168,
231,259
019,054,091
057,060
091
091
039,259
052,053,058
Cable TV converter
code table
Brand name
ABC
Antronix
Archer
Belcor
Cable Star
Cabletenna
Cableview
Century
Citizen
Colour Voice
Comtronics
Contec
Eastern
Garrard
GC Electronics
Code number
020,022,026,030,
032,033,036,066
041
041,058,172
O75
075
041
041
172
172
044,050
059,079
038
021
172
035,075
Gemini 034,
GeneralInstrument 030
Hamlin 028,
292
Hitachi 030
Hytex 026
Jasco !72
089
039,053,278,
Jerrold
Macom
Magnavox
Memorex
Movietime
NSC
Oak
Panasonic
Paragon
Philips
Pioneer
Popular Mechanics
Pulsar
PVP Stereo
Visual Matrix
RCA
Regal
Regency
Rembrandt
Runco
Samsung
Scie_ltificAtlanta
Signal
Signature
SL Marx
Sprucer
Standard
Components
' Starcom
Stargate
Starquest
STS
Sylvania
Te|eview
Texscan
Tocom
Toshiba
Tusa
Unika
United Artists
United Cable
Universal
Viewstar
Zenith
022,030,031,033,
034,043,045,066,
295
052
046
0t9
175
089, I75
026,038,267
040, 126
019
044,046,047,048,
049,050,079,172
042,163
419
019
022
040
039,278,292
021
030,089
019
059, I63
025,027,036,296,
346
034,059
030
059
040
174
022,034,066
034,059
034
175
020
059
020
031,032,078
019
034
041,172
026
022
041,058,075,096,
172,210
046,079,230
019
10

Learning about the remote control
POWERturns the TV on and off (pages 8 and 22)
l'V/Video selects video input source (page 22)
Channel A • cycles through programmed channels (page 13)
TV/Cable/VCR switches between TV; Cable and VCR (page 8)
Channel Numbers allow direct access to channels (page 14)
Volume .e I_adjusts the volume level
Channel Return returns to the last viewed channel (page 15)
Menu allows access to programming menus (page 12)
FavoriteChannelsA•cycles through favorite channels (page 15)
Entersets programmed menu information (pages 15, 16,
17 and 18)
Exitexits programming menus (page 12)
PIP Functions allow access to PIP functions (page 19)
STILLpress to freeze the small PIP
SOURCE press to display a PIP from an external source
PIP press to start picture-in-picture (PIP)
Pip CH AT press to choose the program to be displayed as the
small PIP
LOCATEpress to change the position of the small PIP
SWAppress to switch between the main and small PIP
STOP press to stop avideotape
RECpress to start recording a videotape
PLAYpress to play avideotape
FFpress to fast forward a videotape
REWpress to rewind avideotape
SLOWpress to slow the playback of avideotape
PAUSEpress to temporarily freeze the playback of avideotape
TV/VCRtoggles between TV and VCR when viewing while
recording
Mute mutes the sound (page 24)
Recall displays screen information (page 22)
Recall ---
TV
Cable
VCR
Fay Ch
_Channel
Numbers
Channel
Return
PIP Functions
_=_
%___/

Setting up your TV
After you've installed the batteries and programmed the remote
control, you need to set some preferences on the TV using the menu.
You can access the menu with the buttons on your TV or by using the
remote control,
• When you make a menu selection, your changes occur immediately.
You do not have to press MENU or EXIT to see your changes.
° After fifteen seconds, the menu screen will automatically disappear if
you do not make a selection. Your changes will still be saved.
•When you are finished programming the menus, press EXIT.
Changing the on-screen display language
You can choose from three different languages (English, French and
Spanish) for the on-screen displays. Adjustment menus and messages
will appear in the language of your choice.
_Ibselect a language:
1. Press MENU, then press < or • until the SET UP menu appears.
LP 6TO_ ._klO[O IKk_v_III_IP_FE R,C.C_PT_
LANGUAGE ENGLISH
TViCABLE TV
3H PROGRAM START [< P_
_DD/ERASE ADD
_NTI/2 ANT1
rMORE SELECT
Pl_ tAUE.0 TIII_II_PiREFEB {E.CAPT
__. _ _ FRANCA i S
TV/CABLE TV
CAN PROGRAMA _IGUr_NTE _4 _]
ANADfBORAADOAJOU
ANTIi2 ANT1
VPLUS SELECCION 4_
_N {_
2. Press I or •to highlight LANGUAGE.
3. Press _ or • to highlight your desired language.
Selecting the antenna input
You can connect to two different signal sources by choosing the
antenna input (ANT 1 or ANT 2).
To select the antenna input:
1. Press MENU, then use < or • to highlight the SET UP menu.
2. Press • or • to highlight ANT 1/2.
iHcT_ I AUDIO W. _EFEB}g.C_.P'II
_ANGUAGE ENGLISH
[V/CABLE TV
_H PROGRAM START [_ _]
_DDtERASE ADD
_ANTI ANTa
rt_ORE SELECT
END {EXIT] 4_k
3. Press *Ior • to highlight either ANT 1 or ANT 2, depending on
the antenna terminal you wish to use.
5UANTP,II_EO fV_UMEt TONAf_NF:_Lj
0000 0
_ FJITER--_-->--v ---^
I I I I --J
<), !FIL
Menu
Enter
©®®
@(9@
@®® C_ RTN
Vo4,4
I
Menu/Enter
Exit
Using the ANT/VIDEO button
_bu can monitor or change the signal source that is connected to the TM
By pressing the ANT/VIDEO button on your'I_, you can select tile
VIDEO 1, VIDEO 2, ColorStream, ANT 1 or ANT 2mode. The signal
source you are currently connected to will be displayed in purple.
12

To select the antenna input:
1. Press the ANT/VIDEO button. The signal source you are
connected to is displayed in purple.
V I DEO 1 ANT 1
Vt DEO 2 ANT 2
COLORSTREAM
TO SELECT PUSH ANTIVI_EO
2. Press the button until ANT 1 or ANT 2 is displayed in purple,
indicating the antenna terminal you wish to use.
Adding channels to the TV's memory
Your TV will stop on specific channels that are stored in the TV's
channel memory when you press Channel • or v. Use the steps below
to set all active channels in your area automatically.
Programming channels automatically
Your TV can automatically detect all active channels and store them in
its memory. After the TV has stored the channels in its memory, you
can erase channels or add your favorite channels. If you use both
ANT-1 and ANT-2 terminals, you must program channels for each
input source.
To add channels:
1. Press MENU, then press <or _ to highlight the SET UP menu.
2. Press _i or vuntil the TV/CABLE selection is highlighted.
3. Press _ or I_to highlight either TV or CABLE, depending on
which you use.
PICTLIRE1 AUDIO II.Tt_II!IPREF1_R |C.CAPT I
LAngUAGE ENGLISH
li_l_G_m_m_TV CABLE
ICH PRO_RAM START 14 _t
ADO_ERASE ERABE
ANT_]2 ANT1
SELECT
,MORE MOVE t" :i
........... _ [Exlrl__
4.
5.
.
7.
If you use an antenna, choose TV.
If you use cable, choose CABLE.
Press •to select CH PROGRAM.
Press ,<or _.to start channel programming. The TV will automati-
cally cycle through all the TV or Cable channels (depending on
which you selected), and store all active channels in the
channel memory.
While the TV is cycling through the channels, the message
"Programming Now Please Wait" appears.
_Fhen channel programming is complete, the message "Com-
pleted (channel or cable number)" appears.
Press Channel I or v to view the programmed channels.
MENU ANT/VIDEO 1VOLklMEA 'f'_H_NNE'Lt
O _!_O OO O
Ant/Video
1
©®®
@®®
@®@
VOL MENU/ VOL I_ _'A < I=
., !
i
,-C-_j
r_
_ i¸
_i i2'-;
,_& i
I

Adding and erasing channels manually
After you've programmed the channels, you can add or erase specific
channels.
To add or erase channels:
1. Select the channel you want to add or erase using Channel • or !r.
If adding channels, you must select the channel to add by using
the Channel Number buttons.
2. Press MENU, then press _ or _ to highlight the SET UP menu.
3. Press • or _' to highlight ADD/ERASE.
PtCT_I AUOl0=_a=_EFERtc.cAU
LANGUAGE ENGL I SH
IV/CABLE TV
3H PROGRAM START {4 _
_ll AD{3 ERASE
AN3" _ /_. ANT_
SELECT 4
,MORE MDVE _" "l
END {EXIT_
4. Press _ or _ to select ADD or ERASE, whichever function you
want m perform.
5. Repeat steps 1-4 for other channels you want to add or erase.
Changing channels
To change the channel, you can:
•change the programmed channels using the remote control
• select a channel directly using the remote control
• scan the channels using the TV buttons
To change to the next programmed channel:
Press Channel • or T on the TV or remote control.
To change to a specific channe! (programmed or unprogrammed):
Press the Channel Number buttons (0-9 and 100).
For example, to select channel 125, press the 100 button, the 2
button, and the 5 button.
_£NU _NT, VIDE(2 _VQtUME& ICHANNELJ
@ OO O@ @
Menu
Enter
REC,_L@ MUTE@
@®®
®®®
@®@ c_ RT_
@®@
I
_ Channel
Number
-_ Menu/Enter
_ Exit
14