Total TESF2001 User manual

TESF2001 TESF2501
TESF3501 TESF5001
PRODUCT MANUAL
ELECTRONIC
SAFE
TESF2001 TESF2501
TESF3501 TESF5001
PRODUCT MANUAL
ELECTRONIC
SAFE
TESF2001 TESF2501
TESF3501 TESF5001
PRODUCT MANUAL
ELECTRONIC
SAFE

1
SPECIFICATIONS
Schematic drawing of case:
23 1
Schematic drawing of control panel:
1. Bolts
2. Reset Button
3. Battery Compartment
4. Knob (Master Key)
5. Emergency Lock Cover
6. Battery status
7. Red Light
8. Green Light
Components list
45678
9
Original Instructions

2
SPECIFICATIONS
Accessories
1. Instruction book 1pcs
2. Mechanical keys 2pcs
3. Bolts 4pcs
Model TESF2001 TESF2501 TESF3501 TESF5001
Size(H*W*D) 200*310*200
mm
250*350*250
mm
200*430*350
mm
500*350*330
mm
Net weight 6.4kg 9.3kg 10.7kg 17kg
Internal volume 11L 19L 27L 52L
NoteCaution!
TESF2001 only contains 2* boltsAll drawings in this manual have
been prepared based on the
panel. The exterior design or
component positions of other
models may be different from
what is indicated in the draw-
ings, while the operation is the
same.

3
OPERATION PICTURE
Wall Wall
Wall
12
3 1
2 3
12

4
OPERATION PICTURE
34

5
OPERATION
Caution!
Caution!
Finish operation, pull out the
emergency key and keep it in a
safe place.
Replace 4 fresh batteries by lin-
ing them up in a manner as indi-
cated by the “+ “ and “ - “ signs.
When outage, you should reset
the user’s code.
Inserting the batteries
● Open the door
● Insert 4 x AA batteries into the bat-
tery compartment.
● Under normal circumstances, if the
battery status light is on, it means
that the voltage is low, and a new
battery should be inserted.
Mounting method
(see Dia A)
Fix the safe in the place which is not
easy to move.
● Drill holes for expansion bolts (or
clamping screws) in the right place.
● Turn the expansion bolts counter-
clockwise to separate.
● Use the expansion bolts (or clamping
screws) to secure the case to the
wall.
● Make sure the case is mounted in
place as required and then tighten all
screws.
Electronic safe
Please do not keep emergency keys in
your safe!
Dear valued customer:
Thank you for choosing our products!
You’ve taken an important Step in
organizing and protecting your most
valued possessions. Every series of
our safes is professionally made and
designed to provide safety. Please
take time to read and familiarize your-
self with the proper operating proce-
dures of your new safe presented on
the following pages. Again, thank you
for choosing our products!
Opening your safe for the
rst time
Upon rst opening, users should open
the safe with the emergency key. The
operation in details refers to “opening
the safe with the emergency key”.
● Remove emergency lock cover, then
insert the emergency key, and turn it
counter clockwise.
● Turn the knob (master key) clockwise
to open the door.
Opening door
● Input your user’s code (3 to 8 digits),
each pressing results one buzzer
beep.
● Press “#” button, the green light will
be on.Rotate the knob (master key)
clockwise and pull outwards within 5
seconds, the door is opened.

6
Closing door (see Dia B)
● Turn the knob (master key) counter
clockwise to close the door.
Automatic lock
● 3 continuously wrong entries will
activate the warning beep for 20 sec-
onds.
● Another 3 continuously wrong entries
will activate the warning beep for 5
minutes.
Caution!
Caution!
The key pad would be disabled
during the beeping. You can
only Stop the beeps by opening
the safe with emergency key
and power-cut by removing the
battery.
The user preset code “159”.
Please input the user code again
if the light flashes with three
buzzer beeps
Setting the user code
● With the door open, press the reset
button, start setting code.
● Input new code (3-8 digits), and
press the “#” button to confirm with
one long beep, which indicates the
acceptance and storage of the new
code.
● If the RED light ashes with 3 buzz-
er beeps, which means the code
changing is not effective, and you
need to try again
Setting master code
● Open the safe, input “0 twice and
press reset button, start setting code.
● Input the new master code (3-8 dig-
its), then press “#” button to conrm
● If the RED light ashes three times,
it means the new code is invalid and
should operate again.
Opening the safe with the
emergency key
(see Dia C)
Upon rst receipt of the safe, or either
the electronic circuit malfunction or
codes unknown. You could also use
the emergency key to open the safe.
● Remove the cover of the emergency
lock
● Insert the emergency key, turn it
counter clockwise, then turn the
knob (master key) clockwise to open
the door.

7
MAINTENANCE&MALFUNCTIONS
Truble shooting
PROBLEM CAUSE SOLUTION
1Can I get a replacement
key/ extra key?
Replacement keys are not
available due to security
reasons.
2The keypad becomes
inoperable Low or depleted batteries Use override keys and
replace batteries.
3
My PIN works and the
green light lights, howev-
er, the safe won’t open
Low batteries. Will oper-
ate the keypad but not
the lock relay.
Use override keys and
replace batteries.
4
The Red and Green LED
lights simultaneously
when the correct PIN is
entered.
The batteries are deplet-
ed.
Immediately replace the
batteries.
5The batteries I bought
don’t t the safe?
Batteries can vary in
size. Try another brand.
6
When I use the override
key, I can’t open the
door.
Ensure that you are tuning
the key anti-clockwise,
holding it in that position and
then turn the locking knob
clockwise to release the
catch.

MADE IN CHINA
TOTAL TOOLS CO., PTE. LTD.
www.totalbusiness.com
TOTAL TOOLS WORLD
T0423.V02
No. 45 Songbei Road, Suzhou Industrial Park, China.