TOTALLEDS Solar Motion Light User manual
Solar Motion Light
Us er Manual
Please read and follow all instructions to operate.
Save this manual for future reference.
Installation
Notice
1.5W Plus
Light shines front and back
1. This is a solar powered lamp, please install it in a location where can
get enough sunshine.
2. Please note the lighting time depends on sunshine duration & weather.
3. The lamp will light up when the environmental brightness is less than 30lux.
4. Lamp need to be installed at least 13 feet from the ground.
5. The lamp is equipped with a internal lithium battery, please do not replace it
by yourself, and don't dispose it with household garbage to avoid explosion.
1. Use the card to measure hole position correctly and drill 2 holes.
2. Fix 2 expansion plugs into the holes.
3. Fix a screw to the lower expansion plug with a spare space, insert the
notch onto the screw.
4. Straighten the whole lamp and fasten the upper screw.
5. Press the button to adjust to demanded working mode.
For more information, go to: www.totalleds.com
Specification
Features
2 Working Modes
19ft.
Installation
height
1m
2m
3m
4m
1m 2m 3m 4m 5m 6m 7m
Installation Height
Detection Area
Beam Angle 90°
Power/Lumen
Li-ion Battery
Solar Panel
Detection Angle/Area
Warranty
Lifespan
Installation
Height
Packing
1.5W Plus / 220LM
SMD2835*14PCS (Front 12PCS+Back 2PCS)
1200mAh / 3.7V
0.7Wp, Poly-crystalline silicon
24 months (battery 12months warranty)
35,000hrs
At least 13 feet away from the ground.
120°/ ≤6Mtr
Blister Package (1*Solar light,1*Color page,
1*Accessory bag, 1* User manual,1*Measure card)
Product Name Solar Motion Light
LEDs
IP65 Waterproof
lP Degree
ZERO Electricity Cost
PlR Inductive
IP65 Waterproof Super
Bright
Solar Powered
Light on/off automatically
Cordless
Multi-functional
60° 60°
60° 60°
Press the Button to adjust working mode:
Press 1st time for Mode A.
Press 2nd time for Mode B.
Press 3rd time for off.
Mode A: Automatically turns on to full
brightness (220lm) when motion is
detected in the range 19 feet and
then turns to weak brightness (front
light on & back light on) in 10 seconds
of no motion.
Mode B:Automatically turns on to full
brightness (220lm) when motion is
detected in the range 19 feet and
then turns to weak brightness (front
light off & back light on) in 10
seconds of no motion.
19ft.
13ft.
