
INSTALLATION INFORMATION (DIRECT)
LED SLIMLINE PARKING LIGHT
INSTALLATION INFORMATION (SLIP FIT)
Touch-Plate’s
Part Number
DLC File # UL File # Watts Nominal
Lumens
Delivered
Lumens
CCT
TPSX9-JV150-L30PX-XX N/A E484577 150 26,250 23,877 3000
TPSX9-JV150-L40PX-XX N/A E484577 150 26,250 23,877 4000
TPSX9-JV150-L50PX-XX HS-PL150W-A50 E484577 150 26,250 23,877 5000
TPSX9-MT200-L30PX-XX N/A E484577 200 35,000 30,682 3000
TPSX9-MT200-L40PX-XX N/A E484577 200 35,000 30,682 4000
TPSX9-MT200-L50PX-XX HS-PL200W-A50 E484577 200 35,000 30,682 5000
TPSX9-SO300-L30PX-XX N/A E484577 300 52,500 45,763 3000
TPSX9-SO300-L40PX-XX N/A E484577 300 52,500 45,763 4000
TPSX9-SO300-L50PX-XX HS-PL300W-A50 E484577 300 52,500 45,763 5000
The X’s in Touch-Plate’s Part Number are filled in via the ordering information table below.
TPT LED Type Beam
Angle
Lumens Watts Voltage CCT Material Housing
Color
Mounting
Option
XXXX X-XX XXX -X XX X X -XX
T: TPT PSX: Slimline
Parking Light
(Non-Dim)
9: 150*85° JV:26,250
MT:35,000
SO:52,500
150:150W
200:200W
300:300W
L: 90-305V 30: 3000K
40: 4000K
50: 5000K
P:Clear
PC
B: Black
Z: Bronze
DR:Direct Round
DS:Direct Square
SF: Slip Fit
This table is just for reference. Please verify current option availability with Touch-Plate.
This product must be installed in accordance with National Electrical Code (NEC) and/or
applicable local codes, by a qualified electrician.
DANGER - RISK OF SHOCK - DISCONNECT POWER BEFORE INSTALLATION
• Make the wiring connections: Black/Brown (Line), White/Blue (Neutral), & Green/Yellow-
Green (Ground).
• Remove the side cover of the fixture.
• Affix the LED fixture with screws from the inside of the fixture to the pole.
• Replace the side cover of the fixture.
This product must be installed in accordance with National Electrical Code (NEC) and/or
applicable local codes, by a qualified electrician.
DANGER - RISK OF SHOCK - DISCONNECT POWER BEFORE INSTALLATION
• Make the wiring connections: Black/Brown (Line), White/Blue (Neutral), & Green/Yellow-
Green (Ground).
• Turn the slip fit to the correct angle.
• Slip the fixture onto the post and then secure the fixture with the 4 screws to the post.
1830 Wayne Trace, Fort Wayne, IN 46803
P: 260.426.1565
E: ledsales@touchplate.com
www.ledlightingandcontrols.com