Touchboards BRETFORD 3511 User manual

STEP 2
Set desired height and insert set screws (BB) into
legs and tighten with Allen wrench (provided).
Qty Part# Description
1 SA1656 ood Top
2 022-1593 Lower Leg Assembly
1 022-1589 Right Upper Leg Assembly
1 022-1590 Left Upper Leg Assembly
1 010-2321 Modesty Panel
1 010-2323 Cord Bin
Ref. Qty Part# Description
AA 12 030-0402 10-32 x 5/8 Combo Screws
BB 4 030-0396 3/8-16 x 1/2 Set Screws
CC 1 030-0397 Allen rench
DD 4 030-0325 1/4-20 1/2 Combo Truss Screws
EE 6 030-0168 #8 x 1/2 ood Screws
FF 2 030-0433 10-32 x 1/2 Knurled Screws
HH 2 030-0465 Retaining ashers
JJ 4 015-0045 Glides
KK 12 030-0240 1/4" External Lockwashers
PARTS LIST HARDWARE LIST
3511
Adjustable Corner Table
Assembly Instructions
TOOLS REQUIRED
Phillips Screwdriver
Rubber Mallet
Allen rench (provided)
Lay wood top on a carpeted surface with holes
facing upward. Position the legs onto top with holes
facing in and toward back as shown. LOOSELY
attach with screws (AA) and washers (KK).
STEP 1
AA
BB
KK
FRONT EDGE BACK EDGE

STEP 5
FIG. 2
STEP 4
Screw glides (JJ) into the bottom of
the legs. Turn unit over, position and
adjust glides to floor.
STEP 3
Slide in modesty panel. Tightly secure modesty panel to legs with screws (DD). Attach
to wood top using screws (EE). TIGHTEN ALL HARDWARE. NOTE: Any C frames
for shelves must be assembled prior to attaching the modesty panel.
Insert screws (FF) into the holes in cord bin. Then slide on washer
(HH) as shown in Fig. 1. Attach cord bin to hooks on the back of
the modesty. Secure to bottom of wood top as shown in Fig. 2.
DD EE
FF
FIG. 1
HH
DD
EE
Part #031-1542
Rev. 03.24.00 YP
Bretford Bretford Ltd.
11000 Seymour Avenue Technology House
Franklin Park, IL 60131 7 Lake nd Court, Taplow
T L: 847.678.2545 Bucks SL6 0JQ ngland
800.521.9614 T L: 01628 603558
FAX: [phone] FAX: [phone]
800.343.1779
www.bretford.com