Toyota Hiace User manual

Finish
表１：豪州 E
read carefully and keep in the vehicle.
For your safety and comfort,
Not for Reproduction

Finish
HIACE_AE (L/O 0308)
i
Foreword
Welcome to the growing group of value−conscious people who drive Toyotas. We
are proud of the advanced engineering and quality construction of each vehicle we
build.
This Owner’s Manual explains the operation of your new Toyota. Please read
it thoroughly and have all the occupants follow the instructions carefully.
Doing so will help you enjoy many years of safe and trouble−free motoring.
For important information about this manual and your Toyota, read the follow-
ing pages carefully.
When it comes to service, remember that your Toyota dealer knows your vehicle
very well and is interested in your complete satisfaction. He will provide quality
maintenance and any other assistance you may require.
Please leave this Owner’s Manual in this vehicle at the time of resale. The next
owner will need this information also.
All information and specifications in this manual are current at the time of printing.
However, because of Toyota’s policy of continual product improvement, we reserve
the right to make changes at any time without notice.
Please note that this manual applies to all models and explains all equipment,
including options. Therefore, you may find some explanations for equipment
not installed on your vehicle.
ã2004 TOYOTA MOTOR CORPORATION
All rights reserved. This material may not be reproduced or copied, in whole or in
part, without the written permission of Toyota Motor Corporation.
Not for Reproduction

Finish
HIACE_AE (L/O 0308)
ii
Important information about this manual
Safety and vehicle damage warnings
Throughout this manual, you will see safety and vehicle dam-
age warnings. You must follow these warnings carefully to
avoid possible injury or damage.
The types of warnings, what they look like, and how they are
used in this manual are explained as follows:
CAUTION
This is a warning against anything which may cause
injury to people if the warning is ignored. You are
informed about what you must or must not do in
order to reduce the risk of injury to yourself and
others.
NOTICE
This is a warning against anything which may cause
damage to the vehicle or its equipment if the warning
is ignored. You are informed about what you must or
must not do in order to avoid or reduce the risk of
damage to your vehicle and its equipment.
Safety symbol
When you see the safety symbol
shown above, it means: “Do not...”;
“Do not do this”; or “Do not let this
happen”.
Not for Reproduction

Finish
HIACE_AE (L/O 0308)
iii
Important information about your Toyota
Accessories, spare parts and
modification of your Toyota
A wide variety of non−genuine spare parts and accessories
for Toyota vehicles are currently available in the market.
Using these spare parts and accessories which are not
genuine Toyota products may adversely affect the safety of
your vehicle, even though these parts may be approved by
certain authorities in your country. Toyota therefore cannot
accept any liability or guarantee spare parts and accesso-
ries which are not genuine Toyota products, nor for re-
placement or installation involving such parts.
This vehicle should not be modified with non−genuine
Toyota products. Modification with non−genuine Toyota
products could affect its performance, safety or durability,
and may even violate governmental regulations. In addi-
tion, damage or performance problems resulting from the
modification may not be covered under warranty.
Installation of a mobile
two−way radio system
As the installation of a mobile two−way radio system in
your vehicle could affect electronic systems such as multi-
port fuel injection system/sequential multiport fuel injection
system, anti−lock brake system and SRS airbag system,
be sure to check with your Toyota dealer for precautionary
measures or special instructions regarding installation.
Maintenance schedule
Please refer to the separate “Warranty and Service
Booklet”.
Not for Reproduction

Finish
HIACE_AE (L/O 0308)
iv
Scrapping of your Toyota
The SRS airbag device in your Toyota contains explosive
chemicals. If the vehicle is scrapped with the airbags left
as they are, this may cause an accident such as fire. Be
sure to have the SRS airbag system removed and dis-
posed of by a qualified service shop or by your Toyota
dealer before you dispose of your vehicle.
Not for Reproduction

Finish
HIACE_AE (L/O 0308)
v
1 OPERATION OF INSTRUMENTS AND CONTROLS Page
1 Overview of instruments and controls 1............................
2 Keys and Doors 7.............................................
3 Seats, Seat belts, Steering wheel and Mirrors 19.....................
4 Lights, Wipers and Defogger 43..................................
5 Gauges, Meters and Service reminder indicators 51..................
6 Ignition switch, Transmission and Parking brake 61...................
7 Car audio system 69..........................................
8 Air conditioning system 77.....................................
9 Other equipment 87............................................
2 INFORMATION BEFORE DRIVING YOUR TOYOTA 93..............
3 STARTING AND DRIVING 105....................................
4 IN CASE OF AN EMERGENCY 119...............................
5 CORROSION PREVENTION AND APPEARANCE CARE 139........
6 MAINTENANCE REQUIREMENTS 145............................
7DO−IT−YOURSELF MAINTENANCE
1 Introduction 149...............................................
2 Engine and Chassis 157........................................
3 Electrical components 169......................................
8 SPECIFICATIONS 183...........................................
9 INDEX 191......................................................
Table of contents
Not for Reproduction

Finish
HIACE_AE (L/O 0308)
vi
Model code
Check the model code to see what type of model your vehicle is.
RZH103 −R
The model code appears on the manufacturer’s plate with the heading “MODEL”.
See “Your Toyota’s identification” in Section 2 for the manufacturer’s plate location.
Basic code
RZH103, RZH113, RZH125:
Models with 2RZ−E engine
LH162, LH172, LH184:
Models with 5L engine
Wheelbase
0, 6: Standard wheelbase
1, 7: Long wheelbase
2, 8: Super long wheelbase
Body type
R: Van
Z: Commuter
Not for Reproduction

Finish
HIACE_AE (L/O 0308)
1
OPERATION OF INSTRUMENTS AND
CONTROLS
Overview of instruments and controls
Instrument panel overview 2....................................
Instrument cluster overview 4...................................
Indicator symbols on the instrument panel 6......................
SECTION 1−1
Not for Reproduction

Finish
HIACE_AE (L/O 0308)
2
1. Side vents
2. Front pillar assist grips
3. Side defroster outlets
4. Front interior light
5. Center vents
6. Instrument cluster
7. Power window switches
8. Window lock switch
9. Fuel filler door opener
10. Manual transmission gear shift lever or
automatic transmission selector lever
11. Parking brake lever
12. Glove box
Instrument panel overview
Not for Reproduction

Finish
HIACE_AE (L/O 0308)
3
1. Air conditioning controls
2. Clock
3. Emergency flasher switch
4. Wiper and washer switches
5. Headlight and turn signal switches
6. Rear interior light switch
7. Power back door lock switch
8. Throttle knob
9. Instrument panel light control dial
10. Ignition switch
11. Tilt steering lock release lever
12. Power rear view mirror control switches
13. Rear window defogger switch
14. Cigarette lighter
15. Ashtray
16. Car audio
Not for Reproduction

Finish
HIACE_AE (L/O 0308)
4
1. Service reminder indicators and
indicator lights
2. Speedometer
3. Tachometer
4. Odometer
5. Twin trip meters
6. Trip meter reset knob
7. Engine coolant temperature gauge
8. Low fuel level warning light
9. Fuel gauge
Instrument cluster overview
"With tachometer
Not for Reproduction

Finish
HIACE_AE (L/O 0308)
5
1. Service reminder indicators and
indicator lights
2. Speedometer
3. Trip meter reset knob
4. Odometer
5. Trip meter
6. Engine coolant temperature gauge
7. Low fuel level warning light
8. Fuel gauge
"Without tachometer
Not for Reproduction

Finish
HIACE_AE (L/O 0308)
6
Discharge warning light*
Brake system warning light*
Low engine oil level warning light*
Low engine oil pressure warning light*
Fuel filter warning light*
Timing belt replacement warning light*
Low engine coolant level warning light*
Open door warning light*
SRS warning light*
Headlight high beam indicator light
Turn signal indicator lights
Automatic transmission indicator lights
Engine preheating indicator light
The indicators marked with *are service reminder indicators.
For details, see “Service reminder indicators and warning buzz-
er” in Section 1−5.
Malfunction indicator lamp*
Overdrive−off indicator light
Anti−lock brake system warning light*
Indicator symbols on the instrument panel
Not for Reproduction

Finish
HIACE_AE (L/O 0308)
7
OPERATION OF INSTRUMENTS AND
CONTROLS
Keys and Doors
Keys 8........................................................
Side doors 8...................................................
Power windows 10.............................................
Side windows 13...............................................
Back door 13..................................................
Engine access hole cover 14....................................
Fuel tank cap 15...............................................
SECTION 1−2
Not for Reproduction

Finish
HIACE_AE (L/O 0308)
8
These keys work in every lock.
Since the side doors and back door can
be locked without a key, you should al-
ways carry a spare key in case you acci-
dentally lock your keys inside the vehicle.
Keep the key number plate in a safe
place such as your wallet, not in the
vehicle.
If you should lose your keys or if you
need additional keys, duplicates can be
made by a Toyota dealer using the key
number.
We recommend writing down the key num-
ber and storing it in a safe place.
LOCKING AND UNLOCKING WITH KEY
Insert the key into the keyhole and turn
it.
To lock: Turn the key forward.
To unlock: Turn the key backward.
Vehicles with a power door lock system—
The front passenger’s door, sliding door
and back door lock and unlock simulta-
neously with the driver’s door.
Keys
Side doors—
—Front doors
Not for Reproduction

Finish
HIACE_AE (L/O 0308)
9
LOCKING AND UNLOCKING WITH
INSIDE LOCK KNOB
Move the lock knob.
To lock: Push the knob forward.
To unlock: Pull the knob backward.
Vehicles with a power door lock sys-
tem—The driver’s door can be opened
from the inside even with the lock knob
in the locked position.
If you want to lock the door from the
outside, set the knob in the locked posi-
tion before closing the door. The outside
door handle must be held up while the
door is being closed. Be careful not to
lock your keys in the vehicle.
Vehicles with a power door lock system—
The front passenger’s door, sliding door
and back door lock and unlock simulta-
neously with the driver’s door.
CAUTION
Before driving, be sure that the doors
are closed and locked, especially
when small children are in the ve-
hicle. Along with the proper use of
seat belts, locking the doors helps
prevent the driver and passengers
from being thrown out from the ve-
hicle in an accident. It also helps pre-
vent the doors from being opened
unintentionally.
LOCKING AND UNLOCKING WITH
INSIDE LOCK BUTTON
Move the lock button.
To lock: Push the button forward.
To unlock: Pull the button backward.
If you want to lock the door from the
outside, set the button in the locked posi-
tion before closing the door. Be careful
not to lock your keys in the vehicle.
Vehicles with a power door lock system—
All the doors lock and unlock simulta-
neously with the driver’s door.
—Sliding door
Not for Reproduction

Finish
HIACE_AE (L/O 0308)
10
CAUTION
DWhen closing the sliding door, con-
firm safety of the area around.
Keep the heads, hands and other
parts of the bodies of all occupants
away from the sliding door. Other-
wise, they will be possibly caught
and pinched by the closing door
causing an unexpected serious inju-
ry.
DBefore driving, be sure that the
door is closed and locked, especial-
ly small children are in the vehicle.
Along with the proper use of seat
belts, locking the door helps pre-
vent the driver and passengers
from being thrown out from the ve-
hicle in an accident. It also helps
prevent the door from being opened
unintentionally.
DWhen the vehicle is stopped on a
gradient, the door will slide faster
when opening or closing, so be es-
pecially careful that the passengers
do not get hit or pinched by the
door.
DWhen stopping on a downward
slope, open the door fully while
passengers are getting on or off.
Do not pull the outside handle or
push door handle while the door is
open. The door could suddenly
close by itself causing injury.
NOTICE
Do not close the sliding door by ap-
plying the brakes. Doing so could
cause the door to be damaged. The windows can be operated with the
switch on each side door.
The power windows work when the ignition
switch is in the “ON” position.
OPERATING THE DRIVER’S WINDOW
Use the switch on the driver’s door.
Normal operation: The window moves as
long as you hold the switch.
To open: Lightly push down the switch.
To close: Lightly pull up the switch.
Power windows
Not for Reproduction

Finish
HIACE_AE (L/O 0308)
11
Automatic operation: Push the switch
completely down or pull it completely up,
and then release it. The window will fully
open or close. To stop the window part-
way, lightly move the switch in the oppo-
site direction and then release it.
Key off operation: The driver’s power
window works for about 43 seconds even
after the ignition switch is turned off. It
stops working when you open either front
door.
Jam protection function: During automat-
ic closing operation or key off closing op-
eration, the window stops and opens half
way if something gets caught between the
window and window frame.
If the window receives a strong impact,
this function may work even if nothing is
caught.
CAUTION
DNever try jamming any part of your
body to activate the jam protection
function intentionally.
DThe jam protection function may
not work if something gets caught
just before the window is fully
closed.
Not for Reproduction

Finish
HIACE_AE (L/O 0308)
12
OPERATING THE FRONT PASSENGER’S
WINDOW
Use the switch on the front passenger’s
door. The driver’s door also has a
switch that controls the passenger’s
window.
The window moves as long as you hold
the switch.
To open: Push down the switch.
To close: Pull up the switch.
Ifyoupushinthe“WINDOWLOCK”
switch on the driver’s door, the passen-
ger’s window cannot be operated.
CAUTION
To avoid serious personal injury, you
must do the following.
DBefore you close the power win-
dows, always make sure there is
nobody around the power windows.
You must also make sure the
heads, hands and other parts of the
bodies of all occupants are kept
completely inside the vehicle. If
someone’s neck, head or hands get
caught in a closing window, it
could result in death or serious in-
jury. When anyone closes the power
windows, make sure he or she op-
erates the windows safely.
DWhen small children are in the ve-
hicle, never let them use the power
window switches without supervi-
sion. Use the “WINDOW LOCK”
switch to prevent them from making
unexpected use of the switches.
DBe sure to remove the ignition key
when you leave your vehicle.
DNever leave anyone (particularly a
small child) alone in your vehicle,
especially with the ignition key still
inserted. Otherwise, he/she could
use the power window switches and
get trapped in a window. Unat-
tended person (particularly a small
child) can be involved in a serious
accident.
Not for Reproduction

Finish
HIACE_AE (L/O 0308)
13
Push the lever to unlock and slide the
window.
When closing the window, make sure it is
completely closed.
OPERATING FROM OUTSIDE
Insert the key into the key hole and
turn it.
To lock: Turn the key clockwise.
To unlock: Turn the key counterclockwise.
To open the back door, unlock the back
door, pull the handle up and raise the
back door.
See “Luggage stowage precautions” in
Section 2 for precautions when loading
luggage.
To close the back door, lower it and press
down on it. After closing the back door,
try pulling it up to make sure it is secure-
ly closed. Closing the back door with the
inside lock button pushed in will also lock
the back door. Be careful not to lock your
keys in the vehicle.
CAUTION
Keep the back door closed while driv-
ing. This not only keeps the luggage
from being thrown out but also pre-
vents exhaust gases from entering
the vehicle.
NOTICE
To prevent damage to the back door
dampers, do not apply any force,
paint or let any other foreign matter
on them.
Side windows Back door
Not for Reproduction