TP-Link UE200 V2 User manual

User Guide
USB to Ethernet Network Adapter
©2021 TP-Link 7106509201 REV1.0.0
ATTENTION
♦ When product has power button, the power button is one of the way to shut o the
product; when there is no power button, the only way to completely shut o power is
to disconnect the product or the power adapter from the power source.
♦ Don’t disassemble the product, or make repairs yourself. You run the risk of electric
shock and voiding the limited warranty. If you need service, please contact us.
♦ Keep the device away from water, re, humidity or hot environments.
Recycling
This product bears the selective sorting symbol for Waste electrical and electronic
equipment (WEEE).
This means that this product must be handled pursuant to European directive 2012/19/EU
in order to be recycled or dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization or to the retailer
when he buys a new electrical or electronic equipment.
For technical support, replacement services, the user guide and more
information, please visit https://www.tp-link.com/support, or simply scan
the QR code.
If you have any suggestions or needs for our product guides, you
are welcome to email [email protected].
To communicate with TP-Link users or engineers, please visit
https://community.tp-link.com to join TP-Link Community.

USB
Using the Adapter
LED Explanation
*
*
UE300C:
For Windows 7/8/8.1, Mac OS X 10.8 and older version, please download and install a
driver from our ocial website www.tp-link.com,and search the model number.
UE330, UE300 and UE200:
For Windows 7/8/8.1, please click to install a driver if prompted to do so. For Windows 7,
please click CANCEL if prompted "The program might not have installed correctly" after
installation.
For Mac OS X 10.8 and older version, please download and install a driver from our
ocial website www.tp-link.com, and search the model number.
UE306:
For Windows 7/8 and Mac OS, please download
and install a driver from our ocial website
www.tp-link.com, and search the model number.
This adapter supports Plug and Play feature. Plug in and wait for seconds.
Then this adapter is ready to use.
Status IndicationLED (for UE330)
LED (for UE300C, UE300, UE200, UE306)
Green
Yellow The Ethernet cable is properly connected
White
White
White
Flashing
Flashing
On
On
On The adapter is properly connected and hub is ready to use
Network data is being transferred
Both the adapter and Ethernet cable are properly connected
Network data is being transferred
USB Port
wired network
RJ45 Port
computer
*use UE330 as illustration
*
wired network
RJ45 Port
USB 3.0
UE306
*Works with Nintendo Switch (Supported by UE306 ONLY)
USB
Nintendo Switch