TP-Link ARCHER C3150 User manual

Set up Access Point Mode on AP TP-Link Archer C3150
1. Type http://tplinkwifi.net or http://192.168.0.1 in URL, Login can be
1.1. First setup, to Log in with New Password > press Let’s Get Start
1.2. After first setup, enter the Password that has been set in 1.1 > press Log in

2. Set up Access Point can be
2.1. Quick Setup
2.1.1. Time Zone, press Next
2.1.2. Dynamic IP, press Next

2.1.3. Select Do Not Clone MAC Address, press Next
2.1.4. Enter Wireless Name and password, press Next

2.1.5. Summary page, press Save
2.1.6. Wait until 100% save

2.1.7. TP-Link Cloud, press Login Later
2.1.8. Congratulations, press Finish

2.2. Basic
2.2.1. Basic Status, select Internet
2.2.2. Set up as follows:
Internet Connection Type, select Dynamic IP
Do Not Clone MAC Address
Press Save

2.3. Advanced
2.3.1. Advanced Status, select Network
2.3.2. And then Internet

2.3.3. Set up as follows:
Internet Connection Type, select Dynamic IP
Do Not Clone MAC Address
Press Save