TP-Link Archer C9 User manual

Set up Access Point Mode for TP-Link Archer C9
1. Equipment setting
1.1. Connect Wireless to device
1.2. Wireless –turn off main modem
1.3. Connect LAN cable from main modem to Internet port behind AP TP-Link Archer C9
1.4. Turn on main modem
1.5. Turn on AP TP-Link Archer C9
Remarks: because AP TP-Link Archer C9 has set Access Point mode from the factory. If
correctly connected, it’ll be ready to use immediately. To check the settings as following
steps:

2. Check the settings : type 192.168.0.1 in the Address bar on Browser then press Enter,
type Username = admin, Password = admin and press Login

3. Quick Setup
3.1. Region and Time zone
Region : can’t change
Time zone : select Bangkok, Jakarta, Hanoi
Once completed, press Next
3.2. WAN Connection Type
Select Dynamic IP and press Next

3.3. Select Do NOT clone Mac Address then press Next

3.4. Wireless Settings
Wireless 2.4GHz, 5GHz : select ON
Network Name(SSID) : enter name as desired
Password : set password using 8 characters up (for Wireless Quick Setup, it’ll be
encrypted by WPA/WPA2 Personal)
Once completed, press Next

3.5. Summary
It’s the summary of settings that we selected, press Save

3.6. Test Your Connection
Press Test Internet Connection , Detecting process for a while then Success
Press Finish

3.7. After Quick Setup, screen will return to Network Map