TP TUBE TP200 User manual

TP200
TP TUBE
User guide
HD
sx
®
High Denition Sound Expansion

QUICK GUIDE
230V
All sound sources using
MiniJack 3.5 output.
RCA / line / phono, can be
used with an adapter (accessory)
General amplier output can also be
used with an adapter (accessory)
TV - Ampliers - CD Players - Ap-
pleTV - Playstaon and many
more ....
BT connecons:
iPhone/iPod/iPad
Android phones/tablets
WindowsPhone/tablets
PC
Mac/Macbook
.... And other sources that can be
paired and play via Bluetooth.
The box contains:
1 x TP200 One-Point-Speaker
1 x Power Cord 230V (2m)
1 x Table Stand
1 x User guide
((( (((
AUX
Toslink S/PDIF
Bluetooth
USB USB from PC/Mac
”USB on-the-go”
1 2

SOURCE - switch on and selects the input / source.
A single short press switches the source - the source selected is
shown by a color. (Keeping buon pressed acvates standby)
The last used source is selected automacally, when turned on from
standby mode.
If there is no sound on the selected source. The SOURCE-buon
blinks slowly. (approximately 2 mes / sec)
+ Increases volume
- lowers volume
AUX/Line - Green light
Connect your player with Mini Jack.
To play through the mini-jack 3.5 input, simply select AUX source
(green light) using the SOURCE buon
Bluetooth - Blue light
To play via BT, your player has to be paired with TP200.
To do this, simply select the BT source with the Source buon and then
nd -and choose TP200 + (serial number) in your Bluetooth menu on
your BT-player-device (see its manual)
Your device is now paired with TP200 - This is shown by the blue light
going steady, insted of blinking.
You are now ready to play audio from your Bluetooth device (see its
manual)
Toslink/SPDIF - White light
Connect your source with opcal cable.
To play via Toslink / SPDIF input, simply select Toslink source (White
light) using the SOURCE buon.
Using opcal input for TV, we suggest using the remote control
(Accessory)
Reset to factory sengs
1 - Disconnect power (230V)
2 - Press and hold all 3 buons at the same me
3 - While holding the 3 buons - reconnect Power (230V)
4 - Release the 3 buons.
All Bluetooth parring and other sengs are now reset to factory
sengs.
–+ USB - Purple light
Connect your source with USB kabel.
To play via the USB input, simply select the USB source (Purple Light)
using the SOURCE buon.
Audio playback via USB (see computer / player manual)
Adjustment and update via USB - see ”Features & Opons”
3 4
AUX - Green
Bluetooth - Blue
Toslink - White
USB - Purple
Standby - Red

FEATURES & OPTIONS
Front - With dierent colors, it is possible to give TP200 your own
unique expression. The front (oponal) can be removed and changed
to another color. (Always supplied with Black front)
Wall Bracket - In the need of hanging your TP200 on the wall? you
can use OP201 (oponal accessory)
Table Stand - Mandatory in the box with TP200
Remotecontrol - TPR1 (oponal accessory) allows you to remotely
control volume and other funcons. Enable the patented HDSX® func-
on which is an audio feature that expands the stereo image.
Or adjust the loudness and other funcons
With the remote control, these funcons are available.
HDSX® On/O
Source toggle
Loudness adjust
TTC - Tone Tilt Control
Bluetooth - Play/Pause/Forward/Back
Mute/Sub-bas On/O
Volume up/down
Limiter - To protect the devices and drivers, TP200 has a built in li-
miter, which prevents damaging the speaker at high volume. - This is
warned with ashing red light in the indicator.
Dynamic Loudness - Controlled by the built-in DSP
Soware for adjusng / Update is available for download on our website:
www.tptube.dk/en/customer-service/download/
SETUP & installaon
- Connect TP200 to a computer with USB cable.
- Download the soware ”TP_TubeSetup”
- Install - follow the video guide on the website, if necessary.
- Open the setup program.
With the program, this can now be changed:
Loudness
Tone Tilt Control
HDSX on / o
5 band Equalizer
Auto Level - Analog
Remote click
Reset to Factory Sengs
- These funcons can be changed ”live” while playing on the speaker.
On the remote control (TPR1) the same funcons are available (equalizer,
auto level and remote click excluded), but the entered sengs, changed
in the setup program, will be Your own sound prole and the default set-
ng on the remote’s ”reset buon” - Factory sengs - see page 3
Soware update
- Latest soware is downloaded -and installed along with the SETUP pro-
gram on: www.tptube.dk/kundeservice/download/
- Connect TP200 to computer with USB cable.
- Open the ”Firmware Update” program.
- Driver will now automacally update (wait unl this is nished!)
- Then press ”UPDATE” and the updateprogress starts - speaker turns o
and then on again.
- Your TP200 is now updated and ready to use.
See also our FAQ på www.tptube.dk/en/faq/
ADJUSTMENT & UPDATE
5 6

TP Tube Agenavej 35-37 / 2670 Greve DK / inf[email protected] / www.tptube.dk
Please share your audio experience with TP200 on our facebook site:
www.facebook.com/tptube
Informaon in this manual may change without noce.
The latest version of the documentaon is available on www.tptube.dk
January 2015 All Rights Reserved
TP TUBE
Safety
- TP200 should not come in contact with water, nor vases containing water.
- To avoid injury, always place TP200 securely. This applies
table stand, oor stand or wall bracket.
- To switch o the appliance, disconnect from the power socket.
- Keep distance during audio playback - loud sound can cause permanent
hearing damage.
Declaration of EC-Conformity
We:
TP Radio
Agenavej 37, 2670 Greve, Denmark
Declare under our sole Responsibility that the Product:
Product description: Amplifier and stereo speaker
Model Name: TP200
Conforms to the essential requirements of Directives
2011/65/EC Restriction of Hazardous substances directive (RoHS)
2006/95/EC Low voltage directive (LVD)
2004/108/EC EMC directive
2009/125/EC Eco-design directive
Applied standards and regulations:
RoHS directive: EN 50581:2012
LVD: EN 60065:2002 with A1:2006, A11:2008, A2:2010, A12:2011
EN 62479:2010
EMC directive: EN 55032:2012
EN 61000-2-3:2006 with A1:2009, A2:2009
EN 61000-3-3:2008
Eco-design directive: Commission regulation No 1275/2008
Technical Manager
Henrik Heise Pedersen
Agenavej 37, 2670 Greve Denmark.
Tel: [phone] Fax. [phone]
URL: www.tpradio.dk
Greve 27/2-2015