CyberData 10844 Manual

Installation Quick Reference
VoIP Ceiling Speaker
SiP Compliant
010844
Quick Reference 930094J © 2008, CyberData Corporation, ALL RIGHTS RESERVED© 2008, CyberData Corporation, ALL RIGHTS RESERVED 930094J Quick Reference
The VoIP Ceiling Speaker is a Voice-over-IP public address speaker that uses a single cable to connect to existing LANs.
Typical Speaker System Installation
Getting Started
●Download the VoIP Ceiling Speaker Operations Guide, a PDF file, at:
http://www.cyberdata.net/support/voip/ceilingspeaker.html or go to www.CyberData.net- >Support->
Drivers, Utilities, & Manuals-> Product Drivers & Documentation page->VoIP Ceiling Speaker.
●Create a plan for the locations of your loudspeaker amplifiers.
●Prior to installation, consult local building and electrical code requirements.
Speaker Parts
Parameter Factory Default Setting
IP Addressing static
IP Address 192.168.3.10
Web Access Username admin
Web Access Password admin
Subnet Mask 255.255.255.0
Default Gateway 192.168.3.1
802.3af Compliant Ethernet Hub
VoIP Phone SIP Server
VoIP Ceiling Speakers
(1) Template for Speaker
and Screw Holes*
(1) Speaker Assembly (1) Drop Ceiling Mounting Kit
(3) #8 Nylon Thumb Nuts
(3) #8 Fender Washers
(3) 8-32 x 1 1/4” Mounting
Screws
(1) Drywall Mounting Kit
(3) Plastic Ribbed Anchors
(3) #8 Sheet Metal Screws
* See the last page
of this document

© 2008, CyberData Corporation, ALL RIGHTS RESERVED 930094J Quick Reference Quick Reference 930094J © 2008, CyberData Corporation, ALL RIGHTS RESERVED
Mounting the Speaker
Contacting CyberData
080169B.dwg
VoIP SPEAKER ASSEMBLY
THUMBNUT (3X)
CEILING
VoIP SPEAKER
SCREW
MOUNTING
8-32x1 1/4" (3X)
ASSEMBLY
#8 FENDER
120°
3
16 " HOLE (3x)
120°
WASHER (3X)
#8 NYLON
#6 SCREW (3x)
DRY WALL MOUNTING KIT
TEMPLATE
PLASTIC RIBBED ANCHOR (3x)
DRY WALL MOUNTING KIT
71
4" HOLE
3
8"
To mount a speaker:
1. Use the TEMPLATE on the back of this
document to cut a hole in the wall or ceiling,
and prepare holes for the screws.
2. Plug the Ethernet cable into the speaker
assembly. The yellow light verifies the
network connection.
3. For drop ceiling mounting, position the IP
SPEAKER ASSEMBLY in the ceiling so that
its screw holes align with those you
prepared.
4. For drywall mounting, place the three
PLASTIC RIBBED ANCHORS in the holes
you prepared, and position the IP
SPEAKER ASSEMBLY over them, aligning
the screw holes in the assembly with the
anchors.
5. For drop ceiling mounting*, use the three
8-32 x 1 1/4" MOUNTING SCREWS, #8
NYLON THUMB NUTS, and #8 FENDER
WASHERS to secure the speaker.
For drywall mounting, use the three #8
SHEET METAL SCREWS to secure the
speaker.
* For weak ceiling tile, CyberData offers a
reinforcing mount (CyberData part number
010991A).
Corporate Headquarters
CyberData Corporation
2555 Garden Road
Monterey, CA 93940, USA
Phone: [phone]
Fax: [phone]
www.CyberData.net
Sales: [phone] ext. 334
Support: 831-373-2601 ext. 333
Email: [email protected]t
RMA Dept: [phone] ext. 136
Email: [email protected]
Warranty
CyberData warrants its product against defects in material and
workmanship for a period of two years from the date of purchase.
Should the product fail within the warranty period, CyberData will
repair or replace the product free of charge. This warranty includes all
parts and labor. Should the product fail out-of-warranty, a flat rate
repair charge of one half the purchase price will be assessed. Repair
costs for products that are in warranty, but damaged by improper
modifications or abuse, are charged at the out-of-warranty rate.
Products returned to CyberData, both in and out-of-warranty, are
shipped to CyberData at the customer’s expense. Charges for
shipping repaired products to the customer are paid by CyberData.
For product service, contact the Returned Materials Authorization
(RMA) department. A product will not be accepted for return without
an approved RMA number. Send the product, in its original package,
to: CyberData Corporation, 2555 Garden Road, Monterey, CA 93940,
Attention: RMA “your RMA number”
Connecting Power to the Speaker
Speaker Features
PoE Injector (Part #010867A)
Non PoE Hub
RTFM Switch
To broadcast a speaker’s current IP address,
press the RTFM switch on the speaker face.
When the speaker beeps after pressing the
switch for one second, release the switch to
hear the IP address announcement.
Press and hold the RTFM switch for 20
seconds. The speaker will beep after one
second. Continue to hold the switch until the
speaker beeps again after 20 seconds. Then,
release the switch. The speaker settings are
restored to the factory defaults. The speaker
broadcasts the restored default IP address, and
then announces that it is rebooting.
Speaker Volume
Network Link/Activity LED (yellow)
Speaker Status LED (green)
A blinking light confirms that the speaker is
operational.