Aptoyu HWYX-01 User manual

01 Safety Instructions
1. Please read and follow the instructions;
2. Store and use the product at normal temperature environment;
3. Do not use the product near water; do not immerse this product in any liquid or
drop or splash any liquid on this product;
4. Do not use the product near the heat source, such as heat sink, air conditioner,
stoves, or other instruments that can generate heat (including amplifiers);
5. Do not block the mouth of loudspeaker or stuck objects into the vents or slot;
6. Do not throw the product in case of damage from falling;
7. Please charge with charger complying with affordable power of loudspeaker;
8. Please adjust the loudspeaker to the appropriate volume, in order to avoid hearing
impairment;
9. Please ask professional maintenance staff to repair in time regardless what the
damage result from; unauthorized repair will make the warranty invalid.
M mode key: Bluetooth mode, TFcard
mode (need to insert TFcard), external-
drive sound source mode (connecting
audio line)
Prev/V-:Short press to back to the
previous track; long press to decrease
volume. Next/V+: Short press to the next track;
long press to increase volume.
Play-Pause/Call: Short press the Play button to Pause Music;
Short press to pick up, hang up in coming call; Long press to
decline a call.
Power: Press for 2 seconds to turn on/off
Bluetooth indicator
03 Button Function Description
08 Problem solution07 Technical Parameters
Type Portable Bluetooth loudspeaker
active/passive active
Adjust method Buttons
Storage type Maximum capacity of 128G TF card supportive
Battery Built-in 3600mAh lithium battery
Wireless connection way Bluetooth
100mm
210mm
75mm
05 LED Indicator
MicroUSB interface: Connect the USB
DC5V power adapter or charge in USB port.
AUX-IN interface: Connect audio line and voice
prompts Line-in. Loudspeaker will automatically
switch to the mode of external-drive sound
source.
TFcard: Insert the TFcard in state of power-on and voice prompts Music.
The loudspeaker will automatically play the music within the TFcard.
If necessary, short press the M button can switch to other modes.
USB charging port: The output supply current is 5V 1A,
applicable for phone charging.
The built-in reset key can restart system by
pressing with thin bar.
04 Interface Function Description
Bluetooth searching for matching
Turn on the loudspeaker and find the Setting to turn
on the Bluetooth. Click the Aptoyu-02 in the list to
start connection. When connection succeeds, the
Bluetooth lamp remains on and voice prompt can
be heard.
Notice
When the loudspeaker is turned on, it will
automatically connect to the last connecting
equipment before it turned off last time
(only the Bluetooth remains open). No need to
researching.
06 Bluetooth audio connection
Bluetooth indicator: The Bluetooth lamp flickers when waiting to be
connected; the Bluetooth lamp remains on when the connection
succeeds.
Electric quantity indicator: The lamps flicker successively on battery
charging; battery needs to be charged on low electric quantity.
02 Host and accessories
Instructions
Instructions
3.5mm audio line
MicroUSB power cord
Loudspeaker host
pouch
Instructions
APTOYU
Bluetooth Speaker
HWYX-01

This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: 1) this device may not cause harmful interference, and 2)
this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
FCC statement