TPI Corporation 3200 Series User manual

TPI Corporation
America’s Comfort Conditioning Company
TPI CORPORATION ■ P.O. Box 4973 ■ Johnson City, Tennessee 37602-4973 ■ 800.251.0382
www.tpicorp.com
Wednesday, August 24, 2021
To: Amazon Product Teams
Re: TPI Corporation –Documentation Request
Dear Amazon Product Teams,
This letter provides the following product series offered by TPI Corporation, which is featured on Amazon’s
eCommerce platform:
Product Series: 3200-Series –Electric Wall Heaters
Following documents are included:
1. Agency approval documentation –provides authorization for ETL Markings
a. Details this product is ETL (Intertek) Listed for U.S.A and Canada
2. Instruction Manual
a. Information that is included with the product
TPI Corporation, established in 1949, is the parent company of Markel, Raywall, Fostoria, TPI Industrial,
HotPod, and Columbus Electric. TPI Corporation located in Tennessee, (114 Roscoe Fitz Road, Gray, TN
37615) manufactures electric heating, ventilation, task lighting, and control equipment under these brand
names.
Should you require additional information, please feel free to contact me directly. Thank you for your time and
interest in the TPI Product Lines.
Sincerely,
Mark A. Abell
V.P. of National Accounts
TPI Corporation
Email: [e-mail]

.
<- Back Product Descripon
Title: Fixed And Locaon-Dedicated Electric Room Heaters
Company: TPI CORPORATION - Gray, TN USA
Product
Informaon:
Trade Name(s): Electric Heat, Fostoria, Markel, Modern Heat, Raywall,
Sunwarm, Reddi, TPI.
Air Heaters, TPI, MARKEL, RAYWALL, REDDI, Model Nos. F, G, H, J, K or
P; followed by 3346; may be followed by T or BMS; followed by up to
ve characters. G, J, K or P; followed by 3348; may be followed by T or
BMS; followed by up to ve characters. J, K or P; followed by 3349;
may be followed by T or BMS; followed by up to ve characters. 3346,
3348 or 3349; followed by F, G, H, J, K or P; followed by T
Air Heater, TPI, MARKEL, RAYWALL, REDDI, Model Nos. E3321, E3322,
E3312, E3323TD or E3313, F3316, F3317, F3323TD, F3324TD,
F3325TD, F3326TD, F3327D, G3314, G3315, G3316, G3317, G3323TD,
G3324TD, G3325TD, G3326TD, G3327TD, H3317, H3327TD, HF3315,
HF3316, HF3323TD, HF3324TD, HF3325TD, HF3326TD, J3325TD,
J3326TD, J3327TD, K3325TD, K3326TD, K3327TD, P3325T, P3326T or
P3327T; may be followed by T, T2, D or S. AFA107, AFA110, AFA115,
AFA840, AFA848, AFA215, AFA220, AFA230, AFA240, AFA248, AFA715,
AFA720, AFA730, AFA740, AFA748, AFA830D-3, AFA230D-3, AFA840D-
3, AFA240D-3, AFA848D-3, AFA248D-3, AFA430-3, AFA440-3 or
AFA448-3; may be followed by T, T2, D or S. 3313E, 3315HF or
3316HF; may be followed by T, T2, D or S.
Air Heater, Model Nos. HLA, PHLA; followed by 12, 16, 20; followed by
208, 240, 480, 600; followed by 1, 3; followed by 60; followed by 3, 5,
7.5, 10, 15, 20, 25; followed by 24, 120, 208, 240; may be followed by
T.
Air Heaters, Model Nos. MDC121005, MDC281005, MDC271005,
MDC241005, MDC341005, MDC481005, MDC601005, E8801005,
F8801005, G8801005, H8801005, L8801005, P8801005, U8801005.
Air Curtain with Electric Air Heater, Model Nos. CFHTR36, CFHTR48,
CFHTR60.
Air Heater, Model Nos. F, H, HF, G or P; may be followed by 1, 2 or 3;
may be followed by F, H, G, B or P; followed by UH; followed by -3, -5,
-7, -10, -12, -15, -20, -25, -30, -35, -40, -48 or -50; followed by C, O or
R; followed by 0 or A; followed by 1, 2 or 3; followed by up to three
characters. UH followed by -3, -5, -7, -10, -12, -15, -20, -25, -30, -35,
-40, -48 or -50; followed by C, O or R; followed by 0 or A; followed by
1, 2 or 3; followed by up to three characters.
Air Heater, Model No. CV followed by -4512X, -45X, -45YX, -4527X,
-6012X, -60X, -60YX, -6027X, -7512X, -75X, -75XY, -7527X, -9012X,
-90X, -90YX, -9027X, -10012X, -100X, -100YX, -10027X, -11012X,
.
Contact Us
ETL listed products that
are in doubt or for
products that do not
appear in the directory,
please request a
vericaon of
cercaon.
Americas+1-888-347-5478
(or [phone])
Email
[e-mail]
Intertek Home
Product Directories
DLP on mobile devices
.
.
Inspector Center
Get up-to-date
informaon on everything
from our Accreditaons to
our Cercaons and
Marks. Learn more...
.
.
News
Intertek Unveils New
Design for Product Safety
and Quality Cercaon
Marks. Learn more...
.

-110X, -110YX, -11027X, -12512X, -125X, -125YX or -12527X.
Air Heaters, Model Nos. E, F, H, HF, G, P, *T, U; followed by 1, 2, 3, 4;
followed by E, F, H, G, P, T, U, B; followed by 51; followed by 02, 03,
04, 05, 07, 10, 12, 15, 20, 25, 30, 40, 50; followed by C, D; followed by
A; followed by 1, 2, 3, 4; followed by one or two characters.
Air Heaters, Model Nos. 3452, 3453, 3454, 3455; followed by F, H, G,
J, K. Model No. AFH; may be followed by T, C, R1, R2, A1, A2, R. Model
No. AFH; followed by 21, 23, 71, 81; followed by 20, 30, 40, 50;
oponally followed by T, C, R1, R2, A1, A2 sux.
Air heaters; Room, Fixed/ Locaon-dedicated, Model Nos. 3472,
3473, 3474, 3475; may be followed by F, H, G, J, K, P, Y; 21SCH, 71SCH,
81SCH; followed by 1 - 5. Model Nos. 23SCH, 83SCH; followed by 4, 5.
Model Nos. 41SCH; followed by 2 - 5. Model Nos. 43SCH with sux
numbers 4 to 5.
Ceiling Panel Heaters, Model Nos. CP; followed by 122, 123, 125, 127,
342, 343, 345, 347, 702, 703, 705, 707, 802, 803, 805, 807; may be
followed by R, S, T. Accessory Frame: SF200, SF400, PF200, PF400.
Commercial-Industrial Floor Heater, Model Nos. E, F, G, H, J, K, P1, P3;
followed by 99; followed 28, 36, 40, 48, 60, 72, 84, 96, 108, 120;
followed by -01, -02, -03; followed by 86, 129, 150, 172, 200, 300.
Air Heaters; Room, Fixed/ Locaon-dedicated, Model Nos. F, H, G, J, K,
P, Y; followed by 3472, 3473, 3474, 3475. Model Nos. 21SCH, 71SCH,
81SCH; followed by 1, 2, 3, 4, 5. Model Nos. 23SCH, 83SCH; followed
by 4, 5. Model Nos. 41SCH followed by 2, 3, 4, 5. Model Nos. 43SCH
followed by 4, 5.
Electric Air Heater, Model No. CFHTR followed by 36, 48, 60; followed
by 03, 05, 7.5, 10, 12, 15; followed by 208, 240, 277, 480; followed by
1 or 3.
Heavy-duty Flat Panel Emier Electric Overhead Infrared Heaters,
Model Nos. FSS; followed by -1412, -1420, -1424, -1427, -1448, -1457,
-3120, -3124, -3127, -3148, -3157, -4320, -4324, -4327, -4348, -4357,
-9520, -9524, -9527, -9548, -9557, -1920, -1924, -1927, -1948, -1957.
Model Nos. FSA, followed by -1412, -1420, -1424, -1427, -1448,
-1457, -3120, -3124, -3127, -3148, -3157, -4320, -4324, -4327, -4348,
-4357, -9520, -9524, -9527, -9548, -9557.
Industrial Ceiling or Wall Mounted Air Heaters, Model Nos. F, HF, P;
followed by 3; followed by F, B, P; followed by 51; followed by 55, 60,
65, 70, 75, 80, 85, 90, 95, 100; followed by C; followed by A; followed
by 1, 2; may be followed by two characters.
Industrial Infrared Ceiling Air Heater, Model Nos. RPH-120-A, RPH-
208-A, RPH-240-A, RPH-208-UM, RPH-240-UM, OCH-46-120V, OCH-
46-208V, OCH-46-240V, OCH-46-277V, OCH-57-208V, OCH-57-240V,
OCH-57-277V, OCH-57-480V, OCH-46-120V-SS, OCH-46-208V-SS, OCH-
46-240V-SS, OCH-46-277V-SS, OCH-57-208V-SS, OCH-57-240V-SS,
OCH-57-277V-SS, OCH-57-480V-SS, OCH2-55-208V, OCH2-55-240V,
OCH2-55-277V, OCH2- 55-208V-SS, OCH2-55-240V-SS, OCH2-55-277V-
SS, OCH2-55-480V, OCH2-55-480V-SS, OCH2-66-208V, OCH2-66-240V,
OCH2-66-277V, OCH2-66-480V, OCH2- 66-208V-SS, OCH2-66-240V-SS,
OCH2-66-277V-SS or OCH2-66-480V-SS; may be followed by E.

Industrial Infrared Ceiling Air Heater, Model Nos. MM followed by -13,
-24, -33, -46, -212, -220, -224, -227, -248, -257, -420, -424, -427, -448
or -457, may be followed by one character.
Industrial Unit Heaters, Model Nos. 8, 2, 7, 4, 6; followed by 1, 3;
followed by WD; followed by 03, 05, 07, 10, 15, 20, 25, 30, 40, 48;
followed by T; followed by 01. F, H, G, P, U; followed by 1, 3; followed
by F, H, G, P, U; followed by 55; followed by 03, 05, 07, 10, 15, 20, 25,
30, 40, 48; followed by two characters.
Recessed Ceiling Mounted Air Heaters, Model Nos. 222, 223, 342,
343, 462 or 463; followed by -30, -A30, -31, -60, -A60 or -90; followed
by -TH; may be followed by -A or -SS; followed by -208, -220, -240,
-277, -347, -380, -480 or -575; may be followed by up to ve
addional characters. F32 or H32; followed by -THA or THSS; followed
by -30 or 60.
Wall-Mounted Air Heaters, Model Nos. E followed by 32; followed by
75,10 or 15; may be followed by T or T2. F followed by 32; followed by
75,10,15,20 or 22; may be followed by T or T2. H followed by 32;
followed by 75,10,15,20 or 22; may be followed by T or T2. HF
followed by 32; followed by 10,15,20 or 22; may be followed by T or
T2. 3215E-T or 3222HF-T2.
Evaluated to the
following:
A representave sample of the listed devices have been tested,
invesgated and found to comply with the requirements of the
Standard(s) for Fixed and Locaon-Dedicated Electric Room Heaters
(UL-2021) and are idened with the ETL Listed Mark.
<- Back
© 2010 Intertek All Rights Reserved.
All other product or service names are the property of their respective owners.
.

REV. LEVEL: A ECO 1-7565 REV. DATE: 9-2019 FORM:8979 1 OF 4
INSTALLATION AND OPERATION
INSTRUCTIONS
3200 SERIES
INSTALLATION
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Caution: To prevent electric shock disconnect power to heater at main service before wiring or service.
Attention: pour éviter tout risque d’électrocution, déconnectez l’alimentation de l’appareil de chauffage lors de l’entretien
principal avant le câblage ou l’entretien.
Caution: Do not obstruct the front of the heater with curtains, furniture, doors, etc. Do not place heaters under towel racks .
Proper operation of the heater requires a free ow intake and exhaust of air.
Attention: Ne bloquez pas l’avant du radiateur avec des rideaux, des meubles, des portes, etc. Ne placez pas de radiateur
sous le porte-serviettes. Le bon fonctionnement de l’appareil de chauffage nécessite une entrée et une sortie d’air libres.
GENERAL
These heaters are designed for 2 X 4 recessed or surface mount installation. The 3200 series heaters may be wall mounted
in a vertical position with top discharge, or horizontal position with right or left discharge. The minimum clearance for the
3200 series is 12 inches to the adjacent wall and 6 inches minimum from the oor. These heaters must not be installed
without wallbox model no. BOX 30WB.
INSTALLATION OF WALL BOX 30WB
FOR NEW CONSTRUCTION
1. Position the wall box, maintaining minimum clearances as stated above. Secure to wall stud with nails or screws. Wall
box
2. Must be installed with front edge ush with nished wall surface. See gure 1. Remove knockout in wall box for power
source, and install cable clamp.
3. Insert supply cable through clamp allowing 6-8” for eld wiring.
NOTE: Field wiring must enter the wall box on the left side of the fan end of the heater.
TPI Corporation 114 Roscoe Fitz Road, Gray TN 37615, www.tpicorp.com

REV. LEVEL: A ECO 1-7565 REV. DATE: 9-2019 FORM:8979 2 OF 4
IMPORTANT INSTRUCTIONS
1. When using electrical appliances, basic precautions should always be followed to reduce the risk of re, electrical
shock, and injury to persons, including the following:
2. Read all instructions before using this heater.
3. CAUTION: High temperatures. Keep cords and all other combustible material, such as furniture, papers, clothes
and curtains away from the heater. For safe and efcient operation, keep an open space around heater
of three feet in front and 12 inches at ends and rear.
ATTENTION: hautes températures. Gardez les cordons et tous les autres matériaux combustibles, tels que les meubles,
les papiers, les vêtements et les rideaux, à l’écart de l’appareil de chauffage. Pour un fonctionnement sûr
et efcace, gardez un espace libre autour de l’appareil de chauffage de 3 pieds à l’avant et de 12 pouces
aux extrémités et à l’arrière.
4. Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left
operating and unattended.
5. Do not operate any heater after it malfunctions, has been dropped or damaged in any manner. Return heater to
authorized service facility for examination, electrical or mechanical adjustment, or repair.
6. Do not use outdoors.
7. To disconnect heater, turn controls to off, and turn off power to heater circuit at main disconnect panel (or operate
internal disconnect switch if provided).
8. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric chock or
re, or damage the heater.
9. To prevent a possible re, do not block air intakes or exhaust in any manner.
10. A heater has hot and arcing or sparking parts inside. WARNING: Do not use it in area where gasoline, paint,or
ammable liquids are used or stored.
11. Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause re,
electric shock, or injury to persons.
12. This heater may include an audible or visual alarm to warn that parts of the heater are getting excessively, hot If the
alarm sounds (or illuminates), immediately turn the heater off and inspect for any objects on or adjacent to the heater
that may have blocked the airow or otherwise caused high temperatures to have occurred. DO NOT OPERATE THE
HEATER WITH THE ALARM SOUNDING (OR ILLUMINATING).
13. SAVE THESE INSTRUCTIONS
MAINTENANCE AND CLEANING
The heater should be cleaned at least annually to prevent excess build-up of dirt and lint accumulated under
normal operating conditions. In an unusually dirty environment the cleaning should be done more often. To clean
the heater rst DISCONNECT THE HEATER FROM THE MAIN POWER SOURCE . Then remove the grille.
Using a vacuum cleaner with soft brush attachment clean the fan blade and element of any accumulated dirt or
lint. Be carefull not to bend the petals of the blade. when the cleaning is nished, re-install the grille and restore
power. DO NOT OPERATE THE HEATER WITHOUT GRILLE.

REV. LEVEL: A ECO 1-7565 REV. DATE: 9-2019 FORM:8979 3 OF 4
INSTALLATION OF WALL BOX 30WB
FOR EXISTING CONSTRUCTION
Carefully cut a hole measuring 9 1/4” wide by 12 1/4” long in wall. Wall box BOX4300 must be attached to a wall stud one
edge. Minimum clearances of 12 “ to adjacent wall and 6” to oor must be maintained ces. Attach wall box and secure
power cable as in new construction.
FIG. 1
NOTE: IN THE VERTICAL POSITION THE HEATER CAN BE MOUNTED ONLY FOR TOP DISCHARGE. FIELD
WIRING MUST ENTER THE BOTTOM ON THE LEFT SIDE OF THE HEATER.
INSTALLATION OF HEATER ASSEMBLY
1. Place heater into wall box and secure with the screws provided.
2. Connect power supply to heater pigtails with wire nuts or crimp terminals.
INSTALLATION OF GRILLE AND KNOB
1. Place the two no. 8 oval head screws into grille mounting holes.
2. Align grille with heater and secure. Be careful not to over tighten .
3. To install knob, align at of thermostat shaft with at on knob. Push knob onto shaft until knob almost touches grille .
4. For tamper-resistant installation, set thermostat with knob, remove knob and replace with hole plug. Retain knob for
future use.
OPERATION
1. Turn on the power supply to heater.
2. Rotate thermostat knob fully clockwise.
3. Allow the room to reach desired temperature, then rotate thermostat knob counter clockwise until the heater
de-energizes.
4. For remote thermostat operation, thermostat wiring must be the same size as power supply wiring.
NOTE: This heater is quipped with a manual reset limit control. Disconnect power at main source before reset button is
pushed.

REV. LEVEL: A ECO 1-7565 REV. DATE: 9-2019 FORM:8979 4 OF 4
WIRING SCHEMATICS
THERMOSTAT
L2
ELEMENT
DOUBLE POLE
MOTOR
L1
SINGLE POLE
L1
L2(N) THERMOSTAT
ELEMENT
MOTOR