Track-Vision TRV10100 User manual

USER MANUAL
TRV10100
7” HD COLOR MONITOR
Commercial Monitor

Safety Instructions
☞ Do not use a damaged or loose connector.
This may cause an electric shock, short circuit or fire
☞ Do not pull the connector by the wire or touch the connector with wet hands
- This may cause an electric shock, short circuit or fire.
☞ Do not place the monitor face down.
- The TFT-LCD surface may be damaged.
☞ Do not spray detergent directly on the monitor.
- Use recommended LCD cleaning solution with a smooth cloth.
☞ Do not open the monitor
- In case of problems, contact your local reseller.

1. PART NAME
①.LCD SCREEN: WVGA(800x480)
②.DIMMER SENSOR: Automatic brightness control sensor.
③.TOUCH KEYS: POWER, ENTER, MENU, UP, DOWN.
2. KEY FUNCTIONS
④POWER
Press button to turn the monitor on / off.
⑤ENTER
Press button for viewing
CAM1 > CAM2 > CAM31) > CAM41)
In the setting menu, sub menu data is changed by pressing button.
⑥MENU
Press button to enter display menu (by pressing short)
and setting menu (by pressing long)
Press to switch as below steps.
DISPLAY MENU : BRIGHT > CONTRAST > COLOR > SHARPNESS > TINT>
(Marker width) > (Marker height)
Press to switch as below steps in the setting menu.
SETTING MENU: CAMERA1 > CAMERA2 > CAMERA31) > CAMERA41)
> SYSTEM CONIFG.
①





⑥
⑦
1) Available 4CH monitor system.

⑦UP/DOWN
Press button to move sub menu where want to change.
When the menu OSD is not displayed, control the volume level.
3. VOLUME CONTROL
When the menu OSD is not displayed, control the volume level.
Level : 0~60
4. DISPLAY MENU
Press button to enter display menu (by pressing short)
Press button to switch as below steps.
SETTING MENU : CAMERA1 > CAMERA2 > CAMERA31) > CAMERA41) > SYSTEM
CONFIG
(If operation button is not selected within 10 seconds, the OSD will disappear automatically).
level : 0~60
When marker display is activated, user can adjust marker width and height.
level : 0~60
5. SETTING MENU
Press button to enter setting menu (hold the button few seconds).
Press to switch as below steps in the setting menu.
SETTING MENU : CAMERA1 > CAMERA2 > CAMERA31) > CAMERA41) > SYSTEM
CONFIG
Press button to move sub item where want to change
Press button to change sub menu value.
(If operation button is not selected within 10 seconds, the OSD will disappear automatically).
■VOLUME ■■■■■■■■■■■■■ [30]
■BRIGHT ■■■■■■■■■■■■■ [30]
■CONTRAST ■■■■■■■■■■■■■ [30]
■COLOR ■■■■■■■■■■■■■ [30]
■SHARPNESS ■■■■■■■■■■■■■ [30]
■TINT ■■■■■■■■■■■■■ [30]
■MARKER WIDTH ■■■■■■■■■■■■■ [30]
■MARKER HEIGHT ■■■■■■■■■■■■■ [30]

1) CAMERA SETTING MENU
①MIRROR: ON/OFF
ON : MIRROR OFF : NORMAL
②UPSIDE DOWN: ON/OFF
ON : UPSIDE DOWN OFF : NORMAL
③TRIGGER ENABLE: ON/OFF
ON : If there is trigger signal input, the connected screen (Trigger input screen) is
displayed / OFF
④TRIGGER SUSTAIN: 0~20sec
Each trigger’s delay time is adjustable from 0sec to 20sec.
⑤MARKER DISPLAY: OFF/TRIGGER/ALWAYS
TRIGGER : Distance line display when trigger signal input.
ALWAYS : Display always distance line.
⑥MARKER TYPE: TypeA/TypeB
⑦VIDEO FORMAT : AHD/CVBS
AHD : Set input to high density (AHD) video, 1280x720P
CVBS : Set input to standard analog video, 720x480 (NTSC or PAL system)
▣ MIRROR :OFF
▣ UPSIDE DOWN :OFF
▣ TRIGGER ENABLE :ON
▣ TRIGGER SUSTAIN :02sec
▣ MARKER DISPLAY :TRIGGER
▣ MARKER TYPE :TypeA
▣ ASPECT RATIO :16:9
■ CAMERA1 SETTING
Type B
Type A

2) SYSTEM CONFIG MENU
①AUTO POWER : ON/AUTO/OFF
ON : When power is input, screen is displayed automatically.
OFF
AUTO : Follow last selected condition.
②AUTO DIMMER: ON/OFF
ON : Automatic brightness control sensor.
③AUTO SWITCHING: ON/OFF
ON : Screen switches from cam 1 to split3 mode automatically.
When auto switching is ON, user can set each camera switching delay time.
④SPEED SWITCH: ON/OFF (Option)
The selected camera screen display automatically at over certain speed that user
set in advance.
⑤LANGUAGE : ENGLISH/ FRANCAIS/ NEDERLANDS/ SUOMI/ SVENSKA/ NORSK/ KOREA.
( 7 languages )
⑥FACTORY RESET: Ver1.0
▣ AUTO POWER :ON
▣ AUTO DIMMER :OFF
▣ AUTO SWITCHING :OFF
▣ SPEED SWITCH :OFF
▣ LANGUAGE :ENGLISH
▣ FACTORY RESET :Ver1.0
■ SYSTEM CONIFG

Connection
Specifications SM-702C
Power Input DC 10V~32V
Power Consumption Max. 12Watt
Video System NTSC / PAL compatible
Panel 7" Digital
Resolution 800 (H) x 480 (V) x 3 (RGB)
Format 16:9 wide
Camera input(4CH) Mini DIN 4P, 1Vp-p 75Ω
Specification
Power input DC 12V~32V
Power Consumption Max. 12Watt
Video system AHD/NTSC/PAL
Video input Resolution Max. 1280 x 720P
LCD 7”Digital TFT LCD
Resolution 800(H)x480(V)x3RGB
Format 16:9 wide
Camera input Mini DIN 4P, 1p-p 75Ω
Operating Temp -30°C~+75°C
Storage Temp -40°C~+85°C
Vibration 6G
Dimension 180(W) x 108(H) x 20(D)mm
Weight Approx. 350g

Need another Track-Vision backup camera system?
Visit our NEW online store at track-vision.com !
Distribute by:
RMT Equipment Inc.
30 Emilien-Marcoux, Suite 101
Blainville, QC J7C 0B5
Toll Free : 1-800-648-8132
[email protected]
rmtequip.com