Treasure locator Centurion 21 User manual

Treasure Locator Digital C-21

Instructions Manual

Find yesterday’s treasures

With tomorrow’s technology…

Treasure Locator Digital C-21x Instructions Manual 1

Introduction

The Treasure Locator Centurion 21 is a digital instrument based on a microprocessor, working at 10MHz, very flexible in

its use due to the larger quantity of operational features. The Treasure Locator Centurion 21 is constructed as a precise

and robust instrument.

Controls

2 3

The controls of the Treasure Locator Centurion 21 are made up of information zones and command zones.

Turn on your Treasure Locator Centurion 21 with: POWER (1).

Selecting your own settings:

Pressing MENU(2) you’ll be able to select the following settings:

1. ELEMENT:Select the metal/mineral to locate. (GOLD, DIAMOND, SILVER)

2. MILES:Select distance to locate (1.2; 0.6; 0.3) written in miles.

•From 0 to 0,3 miles (0 up to 500 mts.)

This setting is used to search in small areas, inside a house or with small close targets.

•From 0 to 0,6 miles (0 up to 1 km)

This setting is used for both, close targets or larger ones at longer distances. More sensitive to larger and closer

objects than the previous setting. Not recommended to be used inside a house.

•From 0 to 1,2 miles (0 up to 2 km)

This powerful setting it’s recommended for large targets at longer distances. This position is not recommended

for targets at closer distances.

3. SENSITIVITY:Select the sensitivity that you wish to give the locator. (VERY HIGH, HIGH, MEDIUM,LOW VERY LOW)

4. SOUND:Select the audio level.(BUZZER=low; BUZZER HIGH=high ; SILENT= no audio)

OPERATING:

Turn on your locator with the POWER (1) pad. After 5’’ the locator is activated in search mode with the last setting that has

been left in its memory since last time “turned off “.

MENU CONTROL INSTRUCTIONS:

For custom settings proceed as follow:

1. Press MENU.

2. With Arrows (3) select the setting: ELEMENT, MILES, SOUND, SENSITIVITY.

3. Once one of the settings is selected press MENU again (the setting will appears in [])-Meanwhile the setting is in []

you’ll be able to make your selection using the arrows. After 8’’ of not changing a setting, the locator returns

automatically to search mode.

4. For the locator to return to search mode manually; when your selection of settings is finished, press the Arrows up

to [QUIT] option, when appears than press MENU.

To turn Off, press “Power”.

Treasure Locator Digital C-21x Instructions Manual

peratingO

Turn on your Treasure Locator Centurion 21™pressing “Power” and you will hear a background noise (tac, tac, tac.)

. Press MENU and select “ELEMENT” the desired element position (GOLD, SILVER or DIAMOND)

. Press MENU and select “MILES” the desired distance position.

. Press MENU and select “SENSITIVE”.

. Press MENU and select “VOLUME”.

ow your Treasure Locator Digital C- 21 is ready for searching.

portant Note:

Note: There are times where you will notice an increment in the sound when you are close to an electric unit in

use, such as a radio, computer, etc.

Im Remember that the Treasure Locator is a powerful transmitter/receptor and on some occasions the unit

Correct position of search

can receive radio waves. We also recommend that when you have your hand on the handle, the upper part of your hand

must not touch the lower part of the metal box. For this reason we recommend that the unit not be used close to high

voltage cables or on stormy days.

on (360º) sensitivity of the Treasure Locator, posture is very important. You must stand with

ant. end that you practice the correct position as much as possible until you feel

large distance that it takes the signals. The balance requires

portant Tips:

Due to the balance and moti

your shoulders back, hold firmly the handle of the Treasure Locator but not so strongly that your hand will tire and thus the

locator will tremble. Your elbow should be at a comfortable angle just above your waist. The balance of the locator is correct

when the antenna is parallel to the floor. You may use your hands to stabilize the locator and that way help you achieve the

correct balance before your sweep.

As with any locator, practice is import

To achieve the best results, we recomm

confident that your sweeping motion is even and balanced.

The Treasure Locator is a super-sensitive locator due to the

precision and therefore you must practice until you achieve the best results from your Treasure Locator.

1 – Hold the Treasure Locator at an angle slightly towards the bottom or slightly towards the top.

gin an even sweep from left to right or vice-versa maintaining your

ractice-Practice-Practice

2 – Hold the handle from the upper part.

aintaining your view on the tip of the antenna, be

balance. The more you use the Locator, the easier it will be to maintain this important balance. If you have a garden

“planted with coins”, or you have buried gold or silver objects that have been there approximately 10 years, you have the

perfect practice site. As you know, the longer in time that the targets have been buried the grater will be the oxidation or the

electrons contaminating the ground, as result of the previous, the phenomenon “HALO” will be created around the target

and combining with it, will make this last one much more larger and easier to locate.

Take the Treasure Locator and try different areas and positions.

Lets Search: ost popular option is the inductive search. This search consists in the operator being taken directly towards

sed when the operator has a ‘tip’ about possible treasure being buried and this tip is considered

. Position yourself at a distance of no less than 500m from the possible location of the treasure. ill be able to see if you

The first and m

the object by the locator.

This method is generally u

serious and true by the operator; proceed as follow:

2. Start to walk in the direction of this area and every 10 metres, turn left or right. This way you w

receive a “hook”. A “hook” is a strong jolt of movement from the antenna towards a direction accompanied by an

increase or decrease of the volume being emitted and the LED indicators moving towards the red area. If you don’t

receive a “hook”, continue walking in the same direction repeating this procedure until you do. If you never receive a

“hook”, there may not be a treasure at all.

Treasure Locator Digital C-21x Instructions Manual

3. If you receive a “hook”, continue in the same direction which may actually be the direction in which you were going from

ive a “hook” from any direction, you should also try now again to change your direction to verify that you

The second option through cross marking is used more than anything for the exploration of areas in which the search for

. Establish a starting point at an intersection in one corner of the area or property that you will search. Use the sweeping

epeat this procedure various times until you are sure there is no doubt.

. A strong jolt of movement accompanied by the increase or decrease in the volume and the LED indicators towards the

3. end the following: from the starting point, establish a diagonal which passes

Loc

strong jolt of movement accompanied by the increase or decrease in the volume, generally indicates a large object at an

mend you sweep the area from three different positions. Let’s say

his method works very well with a strong signal but lets imagine you are receiving weak signal and from everywhere. This

the start.

If you rece

are continuing to receive the signal in the direction you were going. This is a very important point for you not to

lose your direction. If at some moment the antenna turns 180° pointing towards yourself, it is highly possible

you have passed the treasure. If this is the case, turn back and find the last signal you received. The treasure

will be between this last signal and the point where the antenna turned180°.

treasure is just a lucky search. You should proceed in the following manner:

1technique that you have practiced. Sweep from right to left or vice-versa covering at least 90º.

2red area, indicates the presence of an object. If you don’t receive a signal, walk towards the right, approximately 25 feet

and do another sweep but this time one of 180º until you reach the end. This squaring method of a large area can be

done on any property by any means.

To re-check a large area, we recomm

through at least half of the area. Following this diagonal line, stop every 75 to 100 feet and sweep in 180º arches. Move

to the contrary position and repeat this procedure. Now you have covered 360º. Repeat this technique until the whole

area or property has been covered.

ating an Object

unknown distance or a small object at a short distance.

To determine the general position of the object, we recom

you had a jolt of movement accompanied by a volume change, the antenna has “hooked” an object. You can take a mark,

(point towards and non moving object with your antenna) as a reference point. A tree or a rock is an example of a mark.

Move to one side some 15 feet and sweep the area again. The antenna should “hook” the object somewhere along the line

from the first hook. Remember where, along the first line, the second line intercepts. Repeat the procedure. If you moved to

your right before, move to your right again. Take a note again and check where the antenna hooks with the jolted movement

in the intersection of the other two. The object should be very close to where these three lines intercept.

would indicate that small objects are scattered around. If this were the case, reduce the search area as much as possible

using various readings and at least one reading from an oblong angle. Then, sweep the area with a good metal detector.

Treasure Locator Digital C-21x Instructions Manual

Objects found at large distances

If after receiving a jolt of movement with a change in volume, you have established an imaginary line towards an inert

object, taken a second reading but the lines don’t intercept, the object is definitely located at a large distance. Having gone

past the inert object which is your reference point, walk along the imaginary line some 15 to 20 feet and then move towards

the left or right and take another reading. Continue this procedure until you have a second “hook” that intercepts with the

first hook line. Once this has been accomplished, take a third (or more) reading until you locate the position of the object.

Treasure Locator Digital C-21x Instructions Manual

Assembling your locator:

To assembling your locator follow the instructions as above.

Fig.1

Fig.2

Fig.3

Fig.4

Fig.1: Control Unit, handle, antenna with filter and connection.

Fig.2: Detail of antenna connection. It’s connected at the rear of the control unit between the two battery Holders.

Fig.3:.The handle is screwed into the hole for this purpose at the bottom of the control unit.

Fig. 4: Your locator is ready and completed and perfectly assembling to be used.

BATTERIES:

IMPORTANT: The Treasure Locator Digital C- 21 only works with 9 volt Alkaline Batteries.

To open the battery holder press and pull out.

Specifications

Receptor of intensity generated by objects

Battery...................................................................................................................................................9v-cc-

Life of Battery.......................................................................................................................................12 hs.

Battery charge Indicator

Operation Frequency...............................................................................................................10 hz- 10 khz

Operational Distance......................................................................................................................2000 mts

Operational Depth...............................................................................................................................10 mts