TRENDnet TBW-107UB User manual

TBW-107UB
1.01
Quick Installation Guide

Table of Contents
Version 02.24.2010
English
Troubleshooting 7
1
1. Before You Start
2. How to Install 2
3. Configuring the Bluetooth Adapter 5
1

?
?CD-ROM (Utility & Driver)
?Multi-Language Quick Installation Guide
TBW-107UB
Package Contents
System Requirements
1. Before You Start
1
?
?USB Port: 2.0 or 1.1
?CPU: 1GHz or above (Windows 7) / 800MHz or above (Windows Vista) /
300MHz or above (Windows XP / 2000)
?Memory: 1GB RAM or above (Windows 7) / 512MB RAM or above
(Windows Vista) / 256MB RAM or above (Windows XP / 2000)
?Hard Drive Space: 50MB or Above
?Windows 7(32/64-bits) / Vista(32/64-bits) / XP(32/64-bits) / 2000(32/64-bits)
CD-ROM Drive

2. How to Install
2
Note:
1. Do not insert the TBW-107UB USB adapter until instructed to do so.
2.If you have any Bluetooth driver (software) previously installed on your
computer or built-in Bluetooth device, please remove the driver and disable the
built-in Bluetooth device first.
1. Insert the Utility & Driver CD-ROM into your
CD-ROM drive.
4. Select Language from the drop down menu.
Click OK.
2. Click Run Setup.exe (Windows 7/Vista).
3. Click Install Utility.

3
2
5. Click Next.
7. Follow the InstallShield Wizard instructions and
then click Finish.
8. Click Yes to restart the computer.
6. Select I accept the terms in the license
agreement. Click Next

4
9. Connect the TBW-107UB into the computer's
USB port.
9. Drivers will install automatically.
Your Installation is complete.

5
3. Configuring the Bluetooth Adapter
Note: Make sure your Bluetooth device is powered on and in pairing mode.
1. Double-click the Bluetooth Places icon on
your desktop.
2. The TBW-107UB will automatically search for
remote devices. If it does not, click Search
Devices.
3. Right click on your Bluetooth device and click
Pair.

6
Your Configuration is complete
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at: www.trendnet.com/register
Thank you for choosing TRENDnet
For detailed information regarding the TBW-107UB configuration and advanced settings,
please refer to the Troubleshooting section, User's Guide on the Utility CD-ROM, or
TRENDnet's website at http://www.trendnet.com.
3. Type in a Passkey (for example: 0000. Please
consult your Bluetooth device's manual for
more information) and then click OK. Then put
in the same Passkey on your Bluetooth device.

7
1.
1.
1.
Windows is unable to recognize my hardware. What should I do?
Make sure your computer meets the minimum requirements as specified in
Section 1 of this quick installation guide.
2. You must install the Bluetooth utility BEFORE you physically install your
Bluetooth Adapter.
3. Plug the adapter into a different USB slot.
2. The Bluetooth software is unable to detect my Bluetooth-enabled device. What
should I do?
Disable any software firewall programs such as ZoneAlarm or Norton Internet
Security. If your have Windows 7, Vista or XP installed on your computer, make
sure to disable the built-in firewall.
2. Make sure your Bluetooth device is powered on.
3. Make sure your Bluetooth device is within 50 meters of the TBW-107UB.
3. I cannot pair my Bluetooth device to the TBW-107UB USB Adapter. What should
I do?
1. Make sure that Bluetooth device is powered on
2. Make sure that your Bluetooth device is in pairing mode.
3. Make sure to put in the same Passkey on both devices.
4. I am not receiving 3Mbps data rate through the adapter. What should I do?
In order to get the full data rate, your Bluetooth device must support Bluetooth
V2.0 with Enhanced Data Rate (EDR).
If you still encounter problems or have any questions regarding the TBW-107UB, please
refer to the User's Guide included on the Utility & Driver CD-ROM or contact
TRENDnet's Technical Support Department.
Troubleshooting