
SPECIFICATIONS
TE-PCI
High Performance Plug-n-Play Ethernet Adapter
TE-PCI
High Performance Plug-n-Play Ethernet Adapter
PRODUCT INFORMATION
To Order Please Call:
1-888-326-6061
ORDERING INFORMATIONORDERING INFORMATION
TRENDnet
TRENDware, USA
R
TE-PCI
32-bit PCI Plug-n-Play Ethernet Adapter
with BNC + RJ-45 Connectors
Standards:
IEEE 802.3 10Base-2 and 10Base-T
On-board Connector:
RJ-45 and BNC
Media Interface:
UTP Cat. 3, 4, 5; EIA/TIA-568 non-standard
100-ohm STP cable; RG-58A/U coaxial cable
Data Bus Supported:
32-bit, PCI Local Bus Specification 2.0
(Bus Master)
IRQ’s Supported:
Assigned by the BIOS to a free IRQ (interrupt)
number
I/O Base Address:
Assigned by the BIOS to a free I/O address block
LAN Chipset:
DEC 32-bit Intelligent Ethernet interface controller
•
•
•
•
•
•
•
Boot ROM Size:
16Kb
FCC Compliance:
FCC Class A certification;
FCC Class B certification
CE Mark:
Compliance with EMI EN50081-1, EN55022,
EMS EN50082-1, IEC 801-2 (ESD),
IEC 801-3 (RS), IEC 801-4 (EFT)
Power Consumption:
2.72W max.
Temperature:
Operating: 32° - 131°F (0° - 55°C)
Storage: -4° - 176°F (-20° - 80°C)
Operating Humidity:
10 to 90%, non-condensing
•
•
•
•
•
•
•
TRENDnet is a registered treademark of TRENDware International, Inc. Other Brands and product names are trademarks of their respective holders. Information provided in this
document pertain to TRENDware products and is subject to change at any time, without notice. For the most recent product information please visit
____________________
http://www.TRENDNET.com.
©
Copyright TRENDware International, Inc. 2004. All Rights Reserved.
TRENDware International, Inc.
3135 Kashiwa Street
Torrance, CA. 90505. USA
Tel: 310-891-1100
Fax: 310-891-1111
Web:
www.TRENDNET.com