TRENDnet TV-IP121WN User manual

SecurView Wireless N Day/Night
Internet Camera
TV-IP121WN
2.01
ŸQuick Installation Guide (1)

Minimum Requirements
1
Package Contents
ŸTV-IP121WN
ŸCD-ROM (Utility and User's Guide)
ŸMulti-Language Quick Installation Guide
Ÿ1 x 2dbi Detachable Antenna
ŸNetwork Cable (1.5m/5ft.)
ŸMounting Kit
ŸPower Adapter (5V DC 2.5A or 1.2A)
If any of the above contents are missing, please contact your reseller.
1. Before You Start
ŸA computer with a wired or wireless network adapter properly installed
ŸCD-ROM Drive
ŸVGA Resolution: 800 x 600 or above
ŸWeb Browser: Internet Explorer (6.0 or higher)
ŸWireless Router (e.g. TEW-691GR) or Access Point (e.g. TEW-690AP)
ŸAn available DHCP Server – routers usually have a built-in DHCP server
SecurView Pro Requirements
Supported Operating Systems 1-8 Cameras 9-32 Cameras
Windows 7 (32/64-bit)/
Windows Vista (32/64-bit)/
Windows XP (32/64-bit)
CPU Memory CPU
Intel
Core 2
Duo
2GB
RAM or
above
4GB
RAM or
above
Memory
Intel
Core 2
Quad

2
2. Connect a RJ-45 network cable from a Switch/Router to the Ethernet port on
the IP Camera.
1. Attach the antenna to the IP Camera.
4. Verify the Power (amber) and Link (Green/Blinking) LEDs are on.
3. Connect the Power Adapter to the IP Camera and then to a power outlet.
2. Hardware Installation
Internet
Modem
Power
Adapter
LAN
Ports
WAN
Port

3
6. Double click the IP Camera to
access the browser configuration.
Verify that the MAC address listed
matches the IP address on your IP
camera. The MAC address is
listed on the bottom of the
TV-IP121WN. Click Search if no
cameras are detected.
3. Configure the IP Camera
Note: It is recommended that you configure the IP Camera from a wired
computer.
1. Insert the Utility CD-ROM into your
CD-ROM drive.
2. Click IP setup.
3. Follow the Installation Wizard
instructions.
4. Once installation is complete click
Close.
5. Click the Start (Windows XP) or
Windows (Windows 7/Vista) icon.
Go to"Programs TRENDnet"
IPSetup and click IPSetup.
7. When the login screen appears,
enter the User name and
Password, and then click OK.
By default:
User Name: admin
Password: admin

12. Verify the Power (Amber) and Link
(Green/Blinking) LEDs are on.
13. Click Live View. Live video will
now appear.
Note:
The TV-IP121WN will not work
wirelessly until you disconnect the
network cable from the back of the
camera.
4
10. Click Site Survey. Select an
ESSID. Then click Apply.
11. Disconnect the RJ-45 cable and
unplug the power. Then plug the
power back in.
9. Click Setup, Network and then
click Wireless.
8. Follow the instructions on the
screen to install the ActiveX
control.

TRENDnet
20675 Manhattan Place
Torrance, CA 90501. USA
Copyright ©2011. All Rights Reserved. TRENDnet.