TRENDnet TV-IP262P User manual

Megapixel PoE Dome Internet Camera
TV-IP262P
Quick Installation Guide (1)
TV-IP262P(V1.0R) / 05.21.2012

1. Before You Start
1
Minimum Requirements
TV-IP262P
CD-ROM (Utility and User's Guide)
Multi-Language Quick Installation Guide
Network cable (1.5 m / 5 ft.)
Mounting kit
Power adapter (12V DC, 1.25A)
A computer with an Ethernet port and web browser
CD-ROM drive
Wired network (e.g. router or switch with DHCP server)
Power over Ethernet (PoE) switch (e.g. TPE-S80 optional)
PoE Injector (e.g. TPE-113GI optional)
Note:
1. The TV-IP262P works with Power over Ethernet (PoE) devices that follow the IEEE 802.3af
standard.
2. The lens must be manually positioned and focused.
Package Contents
Supported Operating Systems 1-8 Cameras
CPU CPU
9-32 Cameras
Memory Memory
Windows 7 (32/64-bit) /
Windows Server 2008 /
Windows Vista (32/64-bit) /
Windows Server 2003 /
Windows XP (32/64-bit)
2GHz 2GHz2GB RAM
or above
4GB RAM
or above
SecurView Pro Requirements

1. Do not install or mount the IP camera until
after you complete the installation steps
below. Temporarily place the IP camera next
to your computer.
2. Insert the Utility CD-ROM into your CD-ROM
drive.
4. Congratulations! Your camera is now
connected to your network. Click TV-IP262P
to confirm access to the management
interface.
5. Once the management interface has opened
in your web browser, save the link of the IP
address to your desktop for ease of access.
6. See the User's Guide for information
concerning advanced management functions.
7. Install the camera in your desired location. To
connect the IP camera to your network using
the PoE functionality, please use either of the
following methods:
2
2. Hardware Installation and Configuration
3. Click Install Camera and follow the
instructions.

3
1. Connect the provided network cable from the Power over Ethernet switch (e.g. TPE-S80) to the
network port on the IP Camera.
2. Connect the switch to your network.
Using the TV-IP262P with a PoE switch (TPE-S80)
TPE-S80 Modem
TV-IP262P
WAN
1-100m PoE
TEW-731BR
Internet

4
1. Connect the power adapter to the TPE-113GI and then to a power outlet
2. Connect a network cable from the TV-IP262P to the TPE-113GI's PWR+DATA OUT port
3. Connect a network cable from a switch or router (e.g. TEW-731BR) to the TPE-113GI's DATA IN
port.
Using the TV-IP262P with an Injector (TPE-113GI)
Non-PoE
TPE-113GI
1-100m PoE
DATA
IN
PWR+DATA
OUT
WAN
TV-IP262P
Modem
TEW-731BR
Internet
Note:
To manage m ultiple cameras and for more advanced features, please install the SecurView Pro
software. Install the software by clicking Install SecurView Pro in the Autorun window and refer to
the SecurView Pro User's Guide on the CD for more information.
Two User's Guides are included – one for the camera and one for the complementary management
software.

TRENDnet
20675 Manhattan Place
Torrance, CA 90501. USA
Copyright ©2012. All Rights Reserved. TRENDnet.