TRENDnet TE100-P1U User manual

- 2 -
TABLE OF CONTENTS
ABOUT THIS GUIDE..............................................................................4
INTRODUCTION.....................................................................................6
PACKAGE CONTENTS.................................................................................7
SYSTEM REQUIREMENTS............................................................................7
GENERAL FEATURES..................................................................................8
PRODUCT VIEW.........................................................................................9
HARDWARE INSTALLATION ............................................................11
NETWORKING APPLICATION.....................................................................11
INSTALLING THE PRINT SERVER ...............................................................12
USING THE UTILITIES........................................................................13
AUTO-RUN INSTALLATION.......................................................................14
PS-UTILITY.............................................................................................15
Installing PS-Utility ............................................................................15
Using PS-Utility..................................................................................17
PS WIZARD.............................................................................................19
WEB CONFIGURATION ......................................................................25
WEB CONFIGURATION UTILITY................................................................25
HOME .....................................................................................................26
SETUP WIZARD........................................................................................27
Second HTTP Port ..............................................................................29
Save to Print Server............................................................................29
CHANGE IP ADDRESS ..............................................................................31
PRINTER INFORMATION ...........................................................................32
FACTORY RESET......................................................................................33
FIRMWARE UPGRADE...............................................................................34
ABOUT....................................................................................................35
PRINTING IN WINDOWS 98SE/ME....................................................36

- 3 -
INSTALLING THE LPRFOR TCP/IP PRINTING CLIENT ................................37
ADDING LPRPRINTER PORTS ..................................................................39
PRINTING FROM WINDOWS 98SE/ME.......................................................41
SETTING TCP/IP PRINTING SETTINGS ......................................................44
PRINTING IN WINDOWS 7/VISTA/XP/2000 ......................................46
SETTING UP WINDOWS 7/ VISTA TCP/IP PRINTING...................................46
SETTING UP WINDOWS XP TCP/IP PRINTING ...........................................51
SETTING UP WINDOWS 2000 TCP/IP PRINTING ........................................60
PRINTING IN MAC OS.........................................................................70
MAC 10.6 SNOWLEOPARD USER......................................................70
MAC 10.5 LEOPARD USER..................................................................80
MAC OS 10.4 TIGERUSER...................................................................90
MAC OS 10.3 PANTHERUSER ..........................................................101
RENDEZVOUS USES IN MAC OS 10.2 .....................................................108

- 4 -
ABOUT THIS GUIDE
This manual provides instructions and illustrations on how to use your
TE100-P1U USB 2.0 Print Server, including:
Chapter 1, Introduction, provides the general information on the
product.
Chapter 2, Hardware Installation, describes the hardware
installation procedure for the product.
Chapter 3, Using the Utilities, helps you to install and use the
software.
Chapter 4, Web Configuration, completes the configuration
using the web browser.
Chapter 5, Printing in Windows 98SE/ME, lets you complete
printing task through your print server in Windows 98SE/ME
environment.
Chapter 6, Printing in Windows 7/Vista/2003 Server/XP/2000,
let you complete printing task through your print server in
Windows 7/Vista/2003 Server/XP/2000 environment.
Chapter 7, Printing in MAC OS, lets you complete printing task
through your print server in MAC OS 10.1~10.6 environment.
Please note that the illustrations or setting values in this manual are
FOR YOUR REFERENCE ONLY. The actual settings and values
depend on your system and network. If you are not sure about the

- 5 -
respective information, please ask your net work administrator or MIS
staff for help.

- 6 -
1
INTRODUCTION
Congratulations on purchasing your TE100-P1U USB 2.0 Print Server,
the easiest and fastest way to deploy printers on your network.
This compact print server can connect your network through an Access
Point under the infrastructure mode, or can be used in ad-hoc mode for
direct communication between computer/notebook and print server
anywhere you wish to locate printer services. It manages the flow of
print files from your workstation or file server to its connected printers,
delivering print jobs to high-performance printers much faster than a
file server or a computer acting as a print server can.
The pocket-sized Print Server features a Web-based Configuration
Utility, which allows you to set up the print server through the web
browser easily and quickly. It also includes a simple software utility
PS-Utility, a user-friendly program that allows you to complete
settings for the print server.

- 7 -
Package Contents
Unpack the package and check all the items carefully, and be certain
that you have:
One TE100-P1U
One AC Power Adapter suitable for your country’s electric power
service.
One Quick Installation Guide.
One Installation CD-ROM containing the PS-Utility program and
the User’s Guide.
If any item contained is damaged or missing, please contact your local
dealer immediately. Also, keep the box and packing materials in case
you need to ship the unit in the future.
System Requirements
Operating System:
Microsoft Windows 7/Vista/2003 Server/XP/2000/ME/98SE
Apple Mac OS X 10.1~10.6
For Web Configuration:
Java-enabled web browser, such as Microsoft® Internet
Explorer 6.0 and Netscape Navigator 6.0.

- 8 -
General Features
Compliant with USB 2.0 Hi-Speed printing
Equipped 10/100 Auto-MDIX Fast Ethernet LAN port
Multi protocol support is ideal for shared printing in mixed-LAN
environments
Windows-based program makes it possible to set up in a few
minutes.
Offer LPR program for Windows 98SE/ME TCP/IP printing
Supports DHCP IP assign function
Supports Web configuration
Provides Flash memory for easy firmware upgrading
Supports IPP for Windows 7/Vista/XP/2000
Supports second http port for remote web configuration and IPP
printing.
Supports Mac OS 10.1 ~10.6

- 9 -
Product View
This section describes the externally visible features of the print server.
Front View
Rear View
LAN Connector –
plug your LAN cable
to this connector.
DC Power Input –
plug the AC Power
Adapter to this jack.
LEDs*
USB Port – connect
the print server to a
Printer Port
Reset Button –
Restore to factory
default setting

- 10 -
* There are three green LED indicators on the rear panel:
LEDs Description
Power Steady light confirms that the Print Server is
powered on.
USB When it blinks, the printer connected is printing.
Link/Act Steady light confirms that the print server
has a good
connection to your network.
When it blinks (briefly dark), the print server is
receiving/ transmitting data from/to the network.

- 11 -
2
HARDWARE
INSTALLATION
Networking Application
The following diagram explains the application of your print server.
Pocket-sized Print Server

- 12 -
Installing the Print Server
Follow these steps for a trouble-free start of print server operations
with your TE100-P1U USB 3.0 Print Server.
1. Confirm proper operation of the printer to be connected to the print
server.
2. When you have confirmed proper operation of the printer, turn off
the power.
3. Confirm that your network is operating normally.
4. Connect the print server to the network (through the RJ-45
connector of the print server).
5. While the printer is powered off, connect the print server to the
printer’s port.
6. Turn on the printer’s power.
7. Connect the DC end of the AC Power adapter to the DC power
input socket of the print server and the AC end to the wall outlet.
This will supply power to the print server immediately.
NOTE: The printer default IP address. To prevent from any conflict
in your network, it is recommended to use the PS-Utility program
to change the IP setting when there is some other device’s IP
Address is the same as the print server’s default IP Address.

- 13 -
3
USING THE UTILITIES
This chapter describes the software utilities for the print server,
including how to set up your print server with these utility. The PS-
Utility is designed with a user-friendly interface that allows you to set
up and administer the print server easily.

- 14 -
Auto-Run Installation
Insert the Installation CD-ROM into your computer’s CD-ROM drive
to initiate the Auto-Run program, and the menu screen will appear as
below.
PS Wizard – click to setup printer port connectivity
Install Utility – click to install PS-Utility. Please refer to the
next section for detailed information on installing the utility.
User's Guide – click to preview the User's Guide or Quick
Installation Guide in PDF format for detailed information of the
Print Server.
Product Registration– click to register your product on-line
Exit – click to close the Auto-Run program.

- 15 -
PS-Utility
To avoid the conflict in your network, you can use PS-Utility to change
the related settings of your print server (such as the IP address) after
finishing the installation.
Installing PS-Utility
1. Insert CD-ROM into CD-ROM drive. Click Install Utility > PS
Utility.
2. click Next >

- 16 -
3. Choose the destination location. If no specific requirement, leave
the default setting and click Next >.
.
4. The InstallShield Wizard starts to install the software, and the
Progress bar indicates the installation is proceeding.
5. When completed, click Finish.

- 17 -
After installing the utility, the application program for the print server
is automatically installed to your computer, and creates a folder in
Start\Programs\PS-Utility.
Using PS-Utility
This section describes the operation of PS-Utility. To launch PS-
Utility:
1. Click Start -> Programs -> PS-Utility, and then click the PS-
Utility item.
2. The main screen will appear as below, and it starts to search the
connected print server within the network.

- 18 -
Component Features:
1. Device List: Display the connected print server within the network.
2. Control Buttons
-Change IP Address:
Click this button to bring
up the following dialog
box, allowing you to
change the IP Address.
In this dialog box, you can
select either Manually
Assign or DHCP Assign
Automatically. When
completed, click OK.
Your print server

- 19 -
-Update Firmware: Click this button to update the firmware of
the selected print server.
-Show Web Setup: Click this button to open your web browser
and launch the Configuration Utility. Alternately, you can
double-click the print server in the Device List to launch the
Configuration Utility.
-Factory Reset: Click this button to reload the factory settings
of the print server.
-Discover Device: Click this button to search the connected
print server again.
-About: Click this button to bring up a window containing the
basic information of PS-Utility.
-Close: Click this button to exit PS-Utility.
-
3. Information Field: Display the basic information of the selected
print server in the Device List.
4. Status Bar: Display the system status.
PS Wizard
PS Wizard is a convenient utility that allows you to set up the print
server’s port connection.
Windows 7/Vista/2003 Server/XP/2000
1) Insert the CD-ROM into your computer’s CD-ROM drive.
Click PS Wizard and then click Win 7/Vista/XP/2000 from

- 20 -
the Auto-Run menu screen.
2) Select the print server, select the desired port and then click
Add Printer.